JBNB  Vol.2 No.1 , January 2011
Polymeric Biomaterial Based Hydrogels for Biomedical Applications
ABSTRACT
This paper focuses on the significant properties of hydrogels prepared with polymeric biomaterials: solely biopolymers (gelatin (G) and sodium alginate (SA) as base polymer) or in combination with synthetic and bio polymers (polyvinylpyrrolidone (PVP) and carboxymethylcellulose (CMC)) for biomedical application. Four kinds of hydrogels: G/SA, G/SA/SB (without and with seabuckthron oil (SB)) and PVP/CMC, PVP/CMC/BA (without and with boric acid (BA)) which are different from each other concerning shape, size, color, texture and properties point of view were achieved. G/SA and G/SA/SB hydrogels vary from pale yellow to orange and a little rubber like having 42-48 % moisture. On the other hand, PVP/CMC and PVP/CMC/BA hydrogels are transparent and soft gel like containing about 90-95% moisture. Both G/SA and PVP/CMC hydrogels show similar trend of viscoelastic behaviour within whole range of measured angular frequency (0.1 – 100 rad.s-1). However, the presence of BA in PVP/CMC/BA, increases the storage modulus, loss modulus and complex viscosity of hydrogel, and the presence of SB in G/SA/SB demonstrates the decrease all of these values. G/SA based hydrogel possesses natural antimicrobial property whereas PVP/CMC based hydrogel needs to incorporate antimicrobial agent to comprise antimicrobial property within the hydrogel. G/SA hydrogels show water absorption capacity until 90 min whereas PVP/CMC hydrogels are able to absorb water steadily till 240 min. Finally, it can be mentioned that all four hydrogels: G/SA, G/SA/SB, PVP/CMC, PVP/CMC/BA which meet the basic requirements of hydrogel dressings, could be recommended as dressing materials for healing of burn or cut wound as well as a tool for transdermal drug delivery.

Cite this paper
nullN. Saha, A. Saarai, N. Roy, T. Kitano and P. Saha, "Polymeric Biomaterial Based Hydrogels for Biomedical Applications," Journal of Biomaterials and Nanobiotechnology, Vol. 2 No. 1, 2011, pp. 85-90. doi: 10.4236/jbnb.2011.21011.
References
[1]   B. D. Ratner, D. Hoffman, F. J. Schoen and J. E. Lemons, “Biomaterial Science; An Introduction to Materials in Medicine,” Academic press, San Diego, 2004.

[2]   D. Shi, “Biomaterials and Tissue Engineering,” Springer- Verlag, Berlin Heidelberg, 2004.

[3]   B. Menaa, F. Menaa, C. Aiolfi-Guimaraes and O. Sharts, “Silica-based nanoporous sol-gel glasses: from bioencapsulation to protein folding studies,” International Journal of Nanotechnology, Vol. 7, No. 1, 2010, pp. 1-45. doi:10.1504/IJNT.2010.029546

[4]   S. C. Anand, J. F. Kennedy, M. Miraftab and S. Rajendran, “Medical textiles and biomaterials for healthcare,” Woodhead Publishing Ltd, Cambridge, 2006.

[5]   S. Dumitriu, “Polymeric Biomaterials, 2nd Ed,” Marcel Dekker publisher, New York, 2002.

[6]   I. Zhang, K. K. Shung and D. A. Edwards, “Hydrogels with enhanced mass transfer for transdermal drug delivery,” Journal of Pharmaceutical Sciences, Vol. 85, No. 12, December 1996, PP. 1312-1316.

[7]   N. Saha, N. Roy and P. Saha, “Allicin containing novel anti-microbial hydrogel,” Proceedings Fifth International Conference on Polymer Modification, Degradation and Stabilization, Liege, Belgium, September 2008.

[8]   N. Saha, A. Saarai, T. Kitano and P. Saha, “Seabuckthron oil incorporated medicated hydrogel based on gelatin – sodium alginate,” Proceedings SPE European Medical Polymers Conference, Belfast, United Kingdom, September 2008.

[9]   A. Saarai, N. Saha, T. Kitano and P. Saha, “Natural resource based medicated hydrogel for health care,” Proceedings Frontiers in Polymer Science, International Symposium celebrating the 50th Anniversary of the journal Polymer, Mainz, Germany, June 2009.

[10]   O. Z. Higa, S. O. Rogero, L. D. B. Machado, M. B. Mathor and A. B. Lugao, “Biocompatibility study for PVP wound dressing obtained in different conditions,” Radiation Physics and Chemistry, Vol. 55, No. 5-6, August 1999, pp. 705-707. doi:10.1002/jbm.a.30308

[11]   M. Sen and E. N. Avci, “Radiation synthesis of poly (N-vinyl-2-pyrrolidone)-κ-carrageenan hydrogels and their use in wound dressing applications. I. Preliminary laboratory tests,” Journal of Biomedial Materials Research Part A, Vol. 74A, No. 2, August 2005, pp. 187-196.

[12]   N. Roy, N. Saha, T. Kitano andP. Saha, “Novel hydrogels of PVP-CMC and their swelling effect on viscoelastic properties,” Journal of Applied Polymer Science, Vol. 117, No. 3, August 2010, pp. 1703-1710.

[13]   N. Roy, N. Saha, T. Kitano and P. Saha, “Development and characterization of novel medicated hydrogel wound dressing, Soft Materials, Vol. 8, No. 2, April 2010, pp. 130-148. doi:10.1080/15394451003756282

[14]   N. Roy, N. Saha, P. Humpolicek and P. Saha, “Permeability and biocompatibility of novel medicated hydrogel wound dressings,” Soft Materials, Vol. 8, No. 4, Nov 2010, pp. 338-357. doi:10.1080/1539445X.2010.502955

[15]   G. D. Winter and J. T. Scales, “Effect of air drying and dressings on surface of a wound,” Nature, Vol. 197, No. 4862, January 1963, pp. 91-92. doi:10.1038/197091b0

[16]   X. Yang, K. Yang, S. Wu, X. Chen, F. Yu, J. Li, M. Ma and Z. Zhu, “Cytotoxicity and wound healing properties of PVA/ws-chitosan/glycerol hydrogels made by irradiation followed by freeze – thawing,” Radiation Physics and Chemistry, Vol. 79, No. 5, May 2010, pp. 606-611. doi:10.1016/j.radphyschem.2009.12.017

[17]   “Hydrogel burn and injury dressing”, http://www.dae.gov.in/publ/betrlife/health/hydrogel.pdf

[18]   L. Martineau and P. N. Shek, “Evaluation of a bi-layer wound dressing for burn care II. In vitro and in vivo bactericidal properties,” Burns, Vol. 32, No. 2, March 2006, pp. 172-179. doi:10.1016/j.burns.2005.08.012

[19]   K. Pal, A. K. Banthia and D. K.Majumdar, “Biomedical evaluation of polyvinyl alcohol – gelatine esterified hydrogel for wound dressing,” Journal of Materials Science: Materials in Medicine, Vol. 18, No. 9, May 2007, pp. 1889-1894. doi:10.1007/s10856-007-3061-2

[20]   J. Kopecek and J. Yang, “Review Hydrogels as smart biomaterials,” Polymer International, Vol. 56, No. 9, September 2007, pp. 1078-1098. doi:10.1002/pi.2253

[21]   P. Saha, N. Saha, N. Roy, “Hydrogel Wound Covering,” Patent filed at Czech patent office (UPV CR). File number PV 2008-306 (2008).

[22]   “Moisture content formula”, http://www.tutorvista.com/math/moisture-content-formula

[23]   T. Galya, V. Sedlarik, I. Kuritka, R. Novotny, J. Sedlarikova and P. Saha, “Antibacterial poly (vinyl alcohol) film containing silver nanoparticles: preparation and characterization,” Journal of Applied Polymer Science, Vol. 110, No. 5, December 2008, pp. 3178-3185. doi:10.1002/mabi.200900131

[24]   V. Rattanaruengsrikul, N. Pimpha and P. Supaphol, “Development of gelatine hydrogel pad as antibacterial wound dressings,” Macromolecular Bioscience, Vol. 9, No. 10, October 2009, pp. 1004-1015.

[25]   “The end zone: Measuring antimicrobial effectiveness with zones of inhibition”, http://www.sciencebuddies.org/science-fair-projects/project_ideas/MicroBio_p014.shtml

[26]   K. R. Park and Y. C. Nho, “Synthesis of PVA/PVP hydrogels having two-layer by radiation and their physical properties,” Radiation Physics and Chemistry, Vol. 67, No. 3-4, June 2003, pp. 361-365. doi:10.1016/S0969-806X(03)00067-7

[27]   R. Barbucci, A. Magnani and M. Consumi, “Swelling Behavior of Carboxymethylcellulose Hydrogels in Relation to Cross-Linking, pH, and Charge Density,” Macromolecules, Vol. 33, No. 20, September 2000, pp. 7475-7480. doi:10.1021/ma0007029

[28]   K. Pal, A. K. Banthia and D. K. Majumdar, “Preparation and characterization of polyvinyl alcohol – gelatin hydrogel membranes for biomedical applications,” AAPS PharmSci Tech, Vol. 8, No. 1, March 2007, Article 21. doi:10.1208/pt080121

 
 
Top