CS  Vol.2 No.1 , January 2011
Voltage-Mode Lowpass, Bandpass and Notch Filters Using Three Plus-Type CCIIs
ABSTRACT
A single input and three outputs voltage-mode biquadratic filter using three plus-type second-generation current conveyors (CCII), two grounded capacitors and five resistors is presented. The proposed circuit offers the following features: realization of three filter functions, which are, lowpass, bandpass and notch filters, simultaneously, the use of only grounded capacitors. PSPICE simulation results are also included.

Cite this paper
nullJ. Horng, Z. Wang and C. Liu, "Voltage-Mode Lowpass, Bandpass and Notch Filters Using Three Plus-Type CCIIs," Circuits and Systems, Vol. 2 No. 1, 2011, pp. 34-37. doi: 10.4236/cs.2011.21006.
References
[1]   C. Toumazou, F. J. Lidgey and D. G. Haigh, “Analogue IC Design: The Current-mode Approach,” Peter Peregrinus Ltd., London, 1990.

[2]   G. W. Roberts and A. S. Sedra, “All Cur-rent-Mode Frequency Selective Circuits,” Electronics Letters, Vol. 25, No. 12, 1989, pp. 759-761. doi:10.1049/el:19890513

[3]   J. A. Svoboda, L. McGory and S. Webb, “Applications of a Commercially Available Current Conveyor,” International Journal of Electronics, Vol. 70, No. 1, 1991, pp. 159-164. doi:10.1080/00207219108921266

[4]   M. Higashimura and Y. Fukui, “Universal Filter Using Plus-Type CCIIs,” Electronics Letters, Vol. 32, No. 9, 1996, pp. 810-811. doi:10.1049/el:19960518

[5]   T. Tsukutani, Y. Sumi and N. Yabuki, “Versatile Current-Mode Biquadratic Circuit Using Only Plus Type CCCIIs and Grounded Capacitors,” Interna-tional Journal of Electronics, Vol. 94, No. 12, 2007, pp. 1147-1156. doi:10.1080/00207210701789998

[6]   J. W. Horng, “Voltage/Current-Mode Universal Biquadratic Filter Using Single CCII+,” Indian Journal of Pure & Applied Physics, Vol. 48, No. 10, 2010, pp. 749-756.

[7]   A. M. Soliman, “Kerwin-Huelsman-Newcomb Circuit using Current Con-veyors,” Electronics Letters, Vol. 30, No. 24, 1994, pp. 2019-2020. doi:10.1049/el:19941368

[8]   W. Kerwin, L. Hu-elsman and R. Newcomb, “State Variable Synthesis for Insen-sitive Integrated Circuit Transfer Functions,” IEEE Journal of Solid State Circuits, Vol. 2, No. 3, 1967, pp. 87-92. doi:10.1109/JSSC.1967.1049798

[9]   R. Senani and V. K. Singh, “KHN-Equivalent Biquad Using Current Conveyors,” Electronics Letters, Vol. 31, No. 8, 1995, pp. 626-628. doi:10.1049/el:19950422

[10]   A. M. Soliman, “Applications of the Current Feedback Amplifiers,” Analog Integrated Circuits and Signal Pro- cessing, Vol. 11, 1996, pp. 265-302. doi:10.1007/BF002 40490

[11]   J. W. Horng, J. R. Lay, C. W. Chang and M. H. Lee, “High Input Impedance Voltage-Mode Multifunction Filters Using Plus-Type CCIIs,” Electronics Letters, Vol. 33, No. 6, 1997, pp. 472-473. doi:10.1049/el:19970297

[12]   E. Altuntas and A. Toker, “Rea-lization of Voltage and Current Mode KHN Biquads Using CCCIIs,” AEU International Journal of Electronics and Com-munications, Vol. 56, No. 1, 2002, pp. 45-49. doi:10.1078/1434-8411- 54100071

[13]   A. M. Soliman, “Kerwin Huelsman Newcomb Filter Using Inverting CCII,” Journal of Active and Passive Electronic Devices, Vol. 3, 2008, pp. 273-279.

[14]   S. Minaei and M. A. Ibrahim, “A Mixed-Mode KHN- Biquad Using DVCC and Grounded Pas-sive Elements Suitable for Direct Cascading,” International Journal of Circuit Theory and Applications, Vol. 37, 2009, pp. 793- 810. doi:10.1002/cta.493

[15]   J. Koton, N. Herencsar and K. Vrba, “Single-Input Three- Output Variable Q and ω0 Filters Using Universal Voltage Conveyors,” International Journal of Electronics, Vol. 97, No. 5, 2010, pp. 531-538. doi:10.1080/0020721 0903486864

[16]   C. M. Chang, C. S. Hwang and S. H. Tu, “Voltage-Mode Notch, Lowpass and Bandpass Filter Using Current-Feed- Back Amplifiers,” Elec-tronics Letters, Vol. 30, No. 24, 1994, pp. 2022-2023. doi:10.1049/el:19941416

[17]   M. Bhushan and R. W. New-comb, “Grounding of Capacitors in Integrated Circuits,” Elec-tronic Letters, Vol. 3, No. 4, 1967, pp. 148-149. doi:10.1049/el:19670114

[18]   E. Yuce and S. Minaei, “IC-CII-Based Universal Current-Mode Analog Filter Employing Only Grounded Passive Components,” Analog Integrated Cir-cuits and Signal Processing, Vol. 58, 2009, pp. 161-169. doi:10.1007/ s10470-008-9225-2

[19]   C. M. Chang, A. M. Soliman and M. N. S. Swamy, “Analytical Synthesis of Low-Sensitivities High-Order Voltage-Mode DDCC and FDCCII-Grounded R and C All-Pass Filter Structures,” IEEE Transactions on Circuits and Systems I: Regular Papers, Vol. 54, No. 7, 2007, pp. 1430-1443. doi:10.1109/TCSI.2007.900183

[20]   A. Fabre, O. Saaid and H. Barthelemy, “On the Frequency Limitations of the Circuits Based on Second Generation Current Conveyors,” Analog In-tegrated Circuits and Signal Processing, Vol. 7, 1995, pp. 113-129. doi:10.100 7/BF01239166

[21]   J. W. Horng, “High-Order Current-Mode and Transimpedance-Mode Uni-versal Filters with Multiple-Inputs and Two-Outputs Using MOCCIIs,” Radioengineering, Vol. 18, No. 4, 2009, pp. 537-543.

 
 
Top