CS  Vol.2 No.1 , January 2011
Remotely Controlled Automated Horse Jump
Abstract: With the application of automation, a horse jump can be controlled with the push of a button, or even a remote control. This enables the rider to adjust the jump to suit their needs while still on their horse. The objective of this work is to design and build a wireless remote motor controller which will be applied to a prototype horse jump. The user will be able to control the forward and reverse direction of the motor by pushing a button or switch via RF remote control. A horse jump prototype consisting of a single jump stand will be constructed.
Cite this paper: nullI. Al-Bahadly and J. White, "Remotely Controlled Automated Horse Jump," Circuits and Systems, Vol. 2 No. 1, 2011, pp. 25-33. doi: 10.4236/cs.2011.21005.

[1]   J. J. Michael, “Power Electronics: Principles and Applications,” Delmar Thomson Learning, USA, 2002.

[2]   J. W. Stewart and J. J. Mistovich, “The 8051 Microcontroller: Hardware, Software and Interfacing,” 2nd Edition, Prentice Hall, New Jersey, 1998.

[3]   W. J. Eldon, “Boolean Algebra and Its Ap-plications,” Dover Publications, USA, 2010.

[4]   M. Summers, “Building Showjumping Courses: A Guide for Beginners,” The Pony Club, 2006.

[5]   2010.

[6]   2010.

[7]   R. Krishnan, “Permanent Magnet Synchronous and Brushless Dc Motor Drives,” CRC Press, Boca Raton, 2009. doi:10.1201/9781420014235

[8]   G. K. Shen, “Remote Control Using Inferared with Message Recording,” Master’s Thesis, Universiti Teknologi Malaysia, 2008.

[9]   J. Ross, “The Book of Wi-Fi: Install, Configure and Use 802.11 b Wireless Networking,” No Starch Press, USA, 2003.

[10]   D. D. M. Bakker and D. M. Gilster, “Bluetooth: End to End,” John Wiley & Sons, Inc., New York, 2002.

[11]   2010.

[12]   2010.