WSN  Vol.5 No.8 , August 2013
Design and Implementation of Remotely Controlled Vehicle Anti-Theft System via GSM Network
Abstract: The purpose of this paper is to build a secured and reliable vehicle anti-theft system which will have the ability to access the vehicle subsystems from a remote location where there is GSM network. And also, the design method involves the interfacing of GSM/GPRS modem module with the vehicle ignition subsystem, and the test result shows that it performs some control actions on the vehicle subsystems from a mobile phone, having taken the advantage of the wide coverage area of some GSM networks. Hence the topic is “Remotely Controlled Vehicle Anti-theft System via GSM Network”.
Cite this paper: T. Oladimeji, P. Oshevire, O. Omitola and O. Adedokun, "Design and Implementation of Remotely Controlled Vehicle Anti-Theft System via GSM Network," Wireless Sensor Network, Vol. 5 No. 8, 2013, pp. 151-157. doi: 10.4236/wsn.2013.58018.

[1]   National Motor Vehicle Theft Reduction Council, 2007.

[2]   Freepatentsonline, 2004-2007.

[3]   Comtech Holdings Ltd., “Uweblite GSM/GPRS Getting Started Guide,” 2005.

[4]   Comtech Holdings Ltd., “JS Uweblite Design Manual,” 2004.

[5]   Comtech Holdings Ltd., “Uweblite Design Manual,” 2006.

[6]   Comtech Holdings Ltd., “UWeb/UWeBox Lite GSM/ GPRS AT Commands Manual Guide,” 2004.

[7]   E. A. Aderibigbe, “Design and Construction of a Home Automation via Domestic Power Line and GSM Network,” Unpublished B.Tech Thesis, Ladoke Akintola University of Technology, Ogbomosho, 2005.

[8]   A. A. Raheem, “Project Methodology (A Practical Guide),” Emola-Jay Communications Incorporated, Ibadan, 2003.

[9]   S. Amos, et al. “Design of a GSM Cell-Phone Based Vehicle Monitoring and Theft Security System,” International Journal of Electrical and Electronics Engineering (IJEEE), Vol. 1, No. 3, 2012, p. 101.

[10]   U. Valentine, “Design of GSM Based Remote Control System,” 2012.