MNSMS  Vol.3 No.3 A , July 2013
Computational Multiaxial Fatigue Modelling for Notched Components*
Author(s) Ayhan Ince*
ABSTRACT
Fatigue failures of driveline and suspension notched components for ground vehicles under multiaxial loading conditions are common, since most of those components are subjected to complex multiaxial loadings in service. A computational fatigue analysis methodology has been proposed here for performing multiaxial fatigue life prediction for notched components using analytical and numerical methods. The proposed multiaxial fatigue analysis methodology consists of an elastic-plastic stress/strain model and a multiaxial fatigue damage parameter. Results of the proposed multiaxial fatigue analysis methodology are compared to sets of experimental data published in the literature to verify the prediction capability of the elastic-plastic stress/strain model and the multiaxial fatigue damage parameter. Based on the comparison between calculated results and experimental data, it is found that the multiaxial elastic-plastic stress/strain model correlates well with experimental strain data for SAE 1070 steel notched shafts subjected to several non-proportional load paths. In addition, the proposed fatigue damage parameter is found to correlate reasonably well with experimental fatigue data of SAE 1045 steel notched shafts subjected to proportional and non-proportional loadings.

Cite this paper
A. Ince, "Computational Multiaxial Fatigue Modelling for Notched Components*," Modeling and Numerical Simulation of Material Science, Vol. 3 No. 3, 2013, pp. 14-22. doi: 10.4236/mnsms.2013.33A003.
References
[1]   V. B. Koettgen, M. E. Barkey and D. F. Socie, “Pseudo Stress and Pseudo Strain Based Approaches to Multiaxial Notch Analysis,” Fatigue & Fracture of Engineering Materials & Structures, Vol. 18, No. 9, 2001, pp. 854-867.

[2]   A. Buczynski and G. Glinka, “Elastic-Plastic Stress-Strain Analysis of Notches under Non-Proportional Loading Paths,” Proceedings of the International Conference on Progress in Mechanical Behaviour of Materials (ICM8), Victoria, May 16-21, 1999, pp. 1124-1130.

[3]   D. Ye, O. Hertel and M. Vormwald, “A Unified Expression of Elastic-Plastic Notch Stress-Strain Calculation in Bodies Subjected to Multiaxial Cyclic Loading,” International Journal of Solids and Structures, Vol. 45, No. 24, 2008, pp. 6177-6189. doi:10.1016/2008.07.012

[4]   A. Ince and G. Glinka, “A Numerical Method for Elasto-Plastic Notch-Root Stress-Strain Analysis,” Journal of Strain Analysis for Engineering Design, Vol. 48, No. 4, 2013, pp. 229-224. doi:10.1177/0309324713477638

[5]   A. Karolczuk and E. Macha, “A Review of Critical Plane Orientations in Multiaxial Fatigue Failure Criteria of Metallic Materials,” International Journal of Fracture, Vol. 134, No. 3-4, 1995, pp. 267-304. doi:10.1007/s10704-005-1088-2

[6]   B. Li, L. Reis and M. de Freitas, “Comparative Study of Multiaxial Damage Models for Ductile Structural Steels and Brittle Materials,” International Journal of Fatigue, Vol. 31, No. 11-12, 2009, pp. 1895-1906. doi:10.1016/2009.01.006

[7]   A. Ince, “Development of Computational Multiaxial Fatigue Modelling of Notched Components,” PhD. Dissertation, University of Waterloo, Waterloo, 2012.

[8]   M. E. Barkey, “Calculation of Notch Strains under Multiaxial Nominal Loading,” PhD. Dissertation, University of Illinois at Urbana-Champaign, Champaign, 1993.

[9]   P. S. Kurath, D. Downing and D. Galliart, “Summary of Non-Hardened Notched Shaft Rounded Robin Program,” In: G. E. Leese and D. Socie, Eds., Multiaxial Fatigue, Analysis and Experiments, Society of Automotive Engineers, AE-14, 1989, pp. 13-32.

 
 
Top