JBiSE  Vol.3 No.12 , December 2010
Production of porous Ni-Ti alloy and test of its biocompatibility under in-vivo conditions
Abstract: Biomaterials have been out of commonly used materials in biomedical applications in recent years. Today among the mostly-used biocompatible metals are especially Ni-Ti alloys. For conducting this study, having extensive usage area in biomedical applications, Ni and Ti materials were utilized for an alloy production. Following being mixed using a suitable mixer at 49Ni/51Ti %wt., the alloy was exposed to cold pressure of 200 MPa and sintered in a mold. In addition, the material gained porosity appearance thanks to usage of the synthesized (SHS) method and then the final shape of the specimen was taken using the method of wire electro erosion discharge machining (WEDM). Afterwards, the specimen was subjected to the biocompatibility test in in-vivo environment by means of on a 3-year-old female dog.
Cite this paper: nullGur, A. , Orhan, N. , Unsaldı, E. , Durmuş, A. and Çolakoğlu, N. (2010) Production of porous Ni-Ti alloy and test of its biocompatibility under in-vivo conditions. Journal of Biomedical Science and Engineering, 3, 1161-1168. doi: 10.4236/jbise.2010.312151.

[1]   Gür,A.K. (2004) The producing of Ni-Ti alloys and investigation of In-Vivo biocompability, Master Thesis, Firat University, Department of Metallurgy Education, Elazig, Turkey.

[2]   Edgerton, M. and Levine, M.J. (1993) Biocompatibility: Its future in prosthodontic research. Journal of Prosthetic Dentistry, 69, 406-415.

[3]   Ayhan H. (2002) Biomaterials, The Magazine Technical and Science, July 2002.

[4]   Sarilmaz, F. (2003) The investigation of the usability of polymer-hydroxyapatite composits in orthopedy as a biomaterial, Master Thesis, Firat University, Department of Metallurgy Education, Elazig,Turkey.

[5]   Park, J. B. (2000) Biomaterials. The biomedical engi- neering Handbook. 2nd Edition. Joseph D. Bronzino Boca Raton: CRC Press LLC, Phedelphia/USA.

[6]   Hench, L. L. and Ethridge, E. C. (1982).Biomaterials: An interfacial approach,, Academic Press, New York/USA.

[7]   Jonn, B.P. and Young, K.K. (2000) Biomedical, enginering Handbook, Unit:37 Metalic Biomaterials.

[8]   Gür, A.K. and Taskin, M. (2004) Metallic biomaterials and biocompability, DAUM, Firat University, Elazig, Turkey.

[9]   Niinomi, M. (2002) Recently metalic materials for biomedical applications, metalurgical and materials transactions, Warrendale, 33, 477-486.

[10]   Bogdanski, D., Koller, M., Müller, D.,Muhr, G., Bram, M., Buchkremer, P.H., Stover D., Choi, J. and Epple, M. (2002) Easy assement of the biocompability of Ni-Ti alloys by ?n-Vitro cell culture experiments on a functionally graded Ni-Ni Ti-Ti Material. Biomaterials, 23, 4549-4555.

[11]   Li, B. Y., Rong,L. J., Li, Y. Y.and Gjunter, V .E. (2000) A recent development in producing prous Ni-Ti shape memory alloys, Intermetallics, 8, 881-884.

[12]   Li, B. Y., Rong, L. J., Li, Y.Y. and Gjunter, V. E. (2000) Synthesis of prous Ni-Ti shape memory alloys by self-propagating high-temperature synthesis: Reaction mechanism and anisotropy in pore structure. Acta Materialia, 48, 3895-3904.

[13]   Pakhomenko, J.S., Syrkashev, V.A. and Gjunter, V.E. (1996) Superplastic shape memory alloys materials and implants in medicine. Prosesesing of the Internotionals Conference Tomsk, Russia Resarch Institue of Medical Materials and Shape Memory Implants,1996, 20.

[14]   Orhan, N. Taskin,M. Gür, A.K.and ünsaldi, E. The effect of igniting on according porous and channel direction produceded PM NiTinol alloys. Proceedings of the 3nd International Symposium on Advanced Technology, Ankara, Turkey, University of Gazi, 2003, 71-77.

[15]   M.Kaya, N. Orhan and B. Kurt (2009) Effect of solution treatment underload on microstructure and fabrication of porous NiTi shape memory alloy by self-propagating high temperature synthesis. Powder Metallurgy, 52, 36-41.

[16]   Sarsilmaz, F., Orhan, N., Unsaldi, E., Durmus, A.S.and Colakoglu, N. (2007) A polyethylene-high proportion hydroxyapatite implant and its investigation in vivo, Acta of Bioengineering and Biomechanics, 9, 9-16.