OJO  Vol.3 No.3 , July 2013
Treatment of Bilateral Recurrent Dislocation of Hip Pros-thesis with Malpositioned Well-Fixed Shell: A Case Report
Abstract: Dislocations of total hip prostheses cause pain and patient dissatisfaction. Recurrent dislocations are difficult to treat mainly when the acetabular metal shell is well-fixed. The purpose of this article was to describe the surgical technique used for the treatment of a bilateral recurrent posterior dislocation after a cementless total hip prosthesis, caused by excessive inclination of acetabular components, in a 72-year-old patient. On both sides, acetabular metal shell, porouscoated, was well-fixed. Revision of the entire acetabular component could be an appropriate therapeutic option because it was malpositioned. Nevertheless, a conservative operation was performed. The metal shell was left in situ and the preexisting polyethylene liner was removed and replaced by a new undersized cross-linked polyethylene liner, then, cemented into the shell and properly oriented. An acetabular cemented augmentation reinforced by 3 cortical screws was associated with the reconstruction. This report suggests that cementation of new liner into a malpositioned well- fixed metal shell associated with an acetabular cemented augmentation is a simple and safe technique for the management of recurrent hip dislocation, for elderly patients in which it is advisable to avoid a major revision hip surgery by medical comorbidities. Nonetheless, further studies with medium-and long-term follow-up are needed to validate this technique.
Cite this paper: F. Judas, L. Maximino and F. Lucas, "Treatment of Bilateral Recurrent Dislocation of Hip Pros-thesis with Malpositioned Well-Fixed Shell: A Case Report," Open Journal of Orthopedics, Vol. 3 No. 3, 2013, pp. 172-177. doi: 10.4236/ojo.2013.33031.

[1]   N. S. Eftekhar, “Dislocation and Instability Complicating Low Friction Arthroplasty of the Hip Joint,” Clinical Orthopaedics, Vol. 121, 1976, pp. 120-125.

[2]   J. L. Masonis and R. B. Bourne, “Surgical Approach, Abductor Function, and Total Hip Arthroplasty Dislocation,” Clinical Orthopaedics, Vol. 405, 2002, pp. 46-53. doi:10.1097/00003086-200212000-00006

[3]   P. J. Daly and B. F. Morrey, “Operative Correction of an Unstable Total Hip Arthroplasty,” Journal of Bone & Joint Surgery, Vol. 74, No. 9, 1992, pp. 1334-1343.

[4]   J. Parvizi, K. I. Kim, G. Goldberg, G. Mallo and W. J. Hozack, “Recurrent Instability after Total Hip Arthroplasty: Beware of Subtle Component Malpositioning,” Clinical Orthopaedics, Vol. 447, 2006, pp. 60-65. doi:10.1097/01.blo.0000218749.37860.7c

[5]   L. D. Dorr and Z. Wan, “Causes of and Treatment Protocol for Instability of Total Hip Replacement,” Clinical Orthopaedics, Vol. 355, 1998, pp. 144-151. doi:10.1097/00003086-199810000-00015

[6]   J. Parvizi, E. Picinic and P. F. Sharkey, “Revision Total Hip Arthroplasty for Instability: Surgical Techniques and Principles,” Journal of Bone & Joint Surgery, Vol. 90, No. 5, 2008, pp. 1134-1142.

[7]   A. H. Carter, E. C. Sheehan, S. M. Mortazavi, J. J. Purtill, P. F. Sharkey and J. Parvizi, “Revision for Recurrent Instability: What Are the Predictors of Failure?” Journal of Arthroplasty, Vol. 26, No. 6, 2011, pp. 46-52. doi:10.1016/j.arth.2011.03.021

[8]   L. Puri, B. Lapinski, R. L. Wixson, J. Lynch, R. Hendrix and S. D. Stulberg, “Computed Tomographic Follow-Up Evaluation of Operative Intervention for Periacetabular Lysis,” Journal of Arthroplasty,” Vol. 21, No. 6, pp. 7882. doi:10.1016/j.arth.2006.05.024

[9]   J. P. Rao and R. Bronstein, “Dislocations Following Arthroplasties of the Hip, Incidence, Prevention, and Treatment,” Orthopedic Review, Vol. 20, No. 3, 1991, pp. 261264.

[10]   F. Leiber-Wackenheim, B. Brunschweiler, M. Ehlinger, A. Gabrion and P. Mertl, “Treatment of Recurrent THR Dislocation Using of a Cementless Dual-Mobility Cup: A 59 Cases Series with a Mean 8 Years’ Follow-Up,” Orthopaedics & Traumatology Surgery & Research, Vol. 97, No. 1, 2011, pp. 8-13. doi:10.1016/j.otsr.2010.08.003

[11]   R. Civinini, C. Carulli, F. Matassi, L. Nistri and M. Innocenti, “A Dual-Mobility Cup Reduces Risk of Dislocation in Isolated Acetabular Revisions,” Clinical Orthopaedics, Vol. 470, No. 12, 2012, pp. 3542-3548. doi:10.1007/s11999-012-2428-y

[12]   D. Halley, A. Glassman and R. D. Crowninshield Jr., “Recurrent Dislocation after Revision Total Hip Replacement with a Large Prosthetic Femoral Head. A Case Report,” Journal of Bone & Joint Surgery, Vol. 86A, No. 4, 2004, pp. 827-830.

[13]   K. Stromsoe and K. Eikvar, “Fascia Lata Plasty in Recurrent Posterior Dislocation after Total Hip Arthroplasty,” Archives of Orthopaedic and Trauma Surgery, Vol. 114, No. 5, 1995, pp. 292-294. doi:10.1007/BF00452090

[14]   M. W. Shrader, J. Parvizi and D. G. Lewallen, “The Use of a Constrained Acetabular Component to Treat Instability after Total Hip Arthroplasty,” Journal of Bone & Joint Surgery, Vol. 85A, No. 11, 2003, pp. 2179-2183.

[15]   A. E. Rady, M. K. Asal and A. A. Bassiony, “The Use of a Constrained Cementless Acetabular Component for Instability in Total Hip Replacement,” Hip International, Vol. 20, No. 4, 2010, pp. 434-439.

[16]   Y. C. Ha, J. J. Yoo, Y. K. Lee, J. Y. Kim and K. H. Koo, “Acetabular Component Positioning Using Anatomic Landmarks of the Acetabulum,” Clinical Orthopaedics, Vol. 470, No. 12, 2012, pp. 3515-3523. doi:10.1007/s11999-012-2460-y

[17]   J. J. Callaghan, D. W. Hennessy, S. S. Liu, K. E. Goetz and A. D. Heiner, “Cementing Acetabular Liners into Secure Cementless Shells for Polyethylene Wear Provides Durable Mid-Term Fixation,” Clinical Orthopaedics, Vol. 470, No. 11, 2012, pp. 3142-3147. doi:10.1007/s11999-012-2380-x

[18]   J. P. Wang, W. M. Chen, C. F. Chen, C. C. Chiang, C. K. Huang and T. H. Chen, “Cementation of Cross-Linked Polyethylene Liner into Well-Fixed Acetabular Shells: Mean 6-Year Follow-Up Study,” Journal of Arthroplasty, Vol. 25, No. 3, 2010, pp. 420-424. doi:10.1016/j.arth.2008.12.003

[19]   P. E. Beaule, E. Ebramzadeh, M. LeDuff, R. Prasad and H. C. Amstutz, “Cementing a Liner into a Stable Cementless Acetabular Shell: The Double-Socket Technique,” Journal of Bone & Joint Surgery, Vol. 86A, No. 5, 2004, pp. 929-934.

[20]   T. R. Yoon, J. K. Seon, E. K. Song, J. Y. Chung, H. Y. Seo and Y. B. Park, “Cementation of a Metal-Inlay Polyethylene Liner into a Stable Metal Shell in Revision Total Hip Arthroplasty,” Journal of Arthroplasty, Vol. 20, No. 5, 2005, pp. 652-657. doi:10.1016/j.arth.2005.01.019

[21]   A. Proenca, F. Judas, R. Cabral, and N. Canha, “Revision Surgery of Hip Prosthesis, Osteolysis Reconstruction with Bone Allografts,” Orthopaedics Department of Coimbra University Hospitals, Coimbra, 1996.

[22]   F. M. Judas, R. F. Dias and F. M. Lucas, “A Technique to Remove a Well-Fixed Titanium-Coated RM Acetabular Cup in Revision Hip Arthroplasty,” Journal of Orthopaedic Surgery and Research, Vol. 6, No. 31, 2011, pp. 1-5.

[23]   P. Watson, J. R. Nixon and R. A. B. Mollan, “A Prosthesis Augmentation Device for the Prevention of Recurrent Hip Dislocation. A Preliminary Report,” Clinical Orthopaedics, Vol. 267, 1991, pp. 79-84.

[24]   R. Maheshwari, N. H. Kumar, et al., “Unstable Hemiarthroplasty of the Hip-Treated with a Simple Technique of Acetabular Augmentation,” Journal of Arthroplasty, Vol. 22, No. 2, 2007, pp. 231-234. doi:10.1016/j.arth.2006.03.011

[25]   R. K. Marti, H. M. Schuller, M. J. A. van Steijn, “Superolateral Bone Grafting for Acetabular Deficiency in Primary Total Hip Replacement and Revision,” Journal of Bone & Joint Surgery (British), Vol. 76, No. 5, 1994, p. 728.

[26]   S. Olerud and G. Karlstrom, “Recurrent Dislocation after Total Hip Replacement. Treatment by Fixing an Additional Sector to the Acetabular Component,” Journal of Bone & Joint Surgery (British), Vol. 67, No. 3, 1985, p. 402.

[27]   T. J. Gill, J. B. Sledge and M. E. Muller, “The BurchSchneider Anti-Protrusio Cage in Revision Total Hip Arthroplasty: Indications, Principles and Long-Term Results,” Journal of Bone & Joint Surgery (British), Vol. 80, 1998, pp. 946-953. doi:10.1302/0301-620X.80B6.8658

[28]   M. Kerboull, M. Hamadouche and L. Kerboull, “The Kerboull Acetabular Reinforcement Device in Major Acetabular Reconstructions,” Clinical Orthopaedics, Vol. 378, 2000, pp. 155-168. doi:10.1097/00003086-200009000-00025