Resistor Loaded EBG Surfaces for Slot Antenna Design

Show more

References

[1] D. Sievenpiper, L. J. Zhang, R. F. J. Broas, N. G. Alexó-polous and E. Yablonovitch, “High-Impedance Electromagnetic Surfaces with a Forbidden Frequency Band,” IEEE Transactions on Microwave Theory and Techniques, Vol. 47, No. 11, 1999, pp. 2059-2074.
doi:10.1109/22.798001

[2] R. F. J. Broas, D. F. Sievenpiper and E. Yablonovitch, “A High-Impedance Ground Plane Applied to a Cellphone Handset Geometry,” IEEE Transactions on Microwave Theory and Techniques, Vol. 49, No. 7, 2001, pp. 1261-1265.

[3] P. Maagt, R. Gonzalo, Y. C. Vardaxoglou and J. M. Baracco, “Electromagnetic Bandgap Antennas and Components for Microwave and (Sub)Millimeter Wave Applications,” IEEE Transactions on Antennas and Propagation, Vol. 51, No. 10, 2003, pp. 2667-2677.
doi:10.1109/TAP.2003.817566

[4] F. Yang and Y. Rahmat-Samii, “Micro-Strip Antennas Integrated with Electromagnetic Band-Gap Structures: A Low Mutual Coupling Design for Array Applications,” IEEE Transactions on Antennas and Propagation, Vol. 51, No. 10, 2003, pp. 2936-2946.
doi:10.1109/TAP.2003.817983

[5] I. Zeev, S. Reuven and B. Reuven, “Micro-Strip Antenna Phased Array with Electromagnetic Band-Gap Substrate,” IEEE Transactions on Antennas and Propagation, Vol. 52, No. 6, 2004, pp. 1446-1453.
doi:10.1109/TAP.2004.830252

[6] Y. Q. Fu and N. C. Yuan, “Elimination of Scan Blindness of Microstriop Phased Array Using Electromagnetic Bandgap Structures,” IEEE Antennas and Wireless Propagation Letters, Vol. 3, No. 1, 2004, pp. 63-65.
doi:10.1109/LAWP.2004.827891

[7] S. Collardey, A.-C. Tarot, P. Pouliguen and K. Mah djoubi1, “Use of Electromagnetic Band-Gap Materials for RCS Reduction,” Microwave and Optical Technology Letters, Vol. 44, No. 6, 2005, pp. 546-550.
doi:10.1002/mop.20693

[8] D. J. Kern and D. H. Werner, “A Genetic Algorithm Approach to the Design of Ultra-Thin Electromagnetic Bandgap Absorbers,” Microwave and Optical Technology Letters, Vol. 38, No. 1, 2003, pp. 61-64.
doi:10.1002/mop.10971

[9] Q. Gao, Y. Yin, D. B. Yan and N. C. Yuan, “Application of Metamaterials to Ultra-Thin Radar Absorbing Material Design,” Electronics Letters, Vol. 41, No. 17, 2005, pp. 936-937. doi:10.1049/el:20051239

[10] V. F. Fusco and S. W. Simms, “Textured Surface Slot Antenna with Reduced Radar Cross-Section,” Electronics Letters, Vol. 43, No. 8, 2007, pp. 438-440.
doi:10.1049/el:20070111

[11] Y. Li, H. Zhang, Y. Fu and N. Yuan, “RCS Reduction of Ridged Waveguide Slot Antenna Array Using EBG Radar Absorbing Material,” IEEE Antennas and Wireless Propagation Letters, Vol. 7, 2008, pp. 43-45.

[12] M. Rahman and M. A. Stuchly, “Transmission Line-Periodic Representation of Planar Microwave Photonic Band gap Structures,” IEEE Antennas and Wireless Propagation Letters, Vol. 30, No. 1, 2001, pp. 15-19.
doi:10.1002/mop.1207