MNSMS  Vol.3 No.3 , July 2013
Ballistic Behavior of Heracron&reg-Based Composites: Effect of the Number Multifilaments on High-Speed Projectiles
Author(s) Jung Seop Lim*
ABSTRACT
In this study, two Heracron? woven fabrics, HT840-1 and HT840-2, were fabricated with different multifilament fibers, and their resistance to ballistic impact was investigated. For the same weight and number of plies, the HT840-2 fabric showed improved ballistic properties, compared with HT840-1; this result is contrary to the fiber and fabric properties. With the exception of the yarn’s physical properties, this behavior can be explained in terms of the number of multifilaments, which strongly influenced the ballistic mechanism, i.e., a greater number of multifilament fibers facilitates energy dissipation from a high-speed ballistic projectile. In summary, establishing this optimal number of multifilaments is the key to optimizing the ballistic properties of any given fabric.

Cite this paper
J. Lim, "Ballistic Behavior of Heracron&reg-Based Composites: Effect of the Number Multifilaments on High-Speed Projectiles," Modeling and Numerical Simulation of Material Science, Vol. 3 No. 3, 2013, pp. 84-89. doi: 10.4236/mnsms.2013.33011.
References
[1]   H. H. Yang and K. A. Fiber, “Aramid Fiber,” John Wiley & Sons Ltd., Chichester, 1993.

[2]   P. J. de Lang, P. G. Akker, E. Mäder, S. L. Gao, W. Prasithphol and R. J. Young, “Controlled Interfacial Adhesion of Twaron® Aramid Fibers in Composites by the Finish Formulation,” Composites Science and Technology, Vol. 67, 2007, pp. 2027-2035. doi:10.1016/j.compscitech.2006.11.018

[3]   Y. Rao, A. J. Waddon and R. J. Farris, “The Evaluation of Structure and Properties in Poly(p-phenylene terephthalamide) Fibers,” Polymer, Vol. 42, 2001, pp. 5925-5935.

[4]   C. Y. Yue and K. Padmanabhan, “Interfacial Studies on Surface Modified Kevlar Fibre/Epoxy Matrix Composites,” Composite Part B, Vol. 30, No. 2, 1999, pp. 205-217. doi:10.1016/S1359-8368(98)00053-5

[5]   T. K. Lin, S. J. Wu, J. S. Lai and S. S. Shyu, “The Effect of Chemical Treatment on Reinforcement/Matrix Interaction in Kevlar-Fiber/Bismaleide Composites,” Composites Science and Technology, Vol. 60, No. 9, 2000, pp. 1873-1878. doi:10.1016/S0266-3538(00)00074-9

[6]   R. Park and J. S. Jang, “Impact Behavior of Aramid Fiber/Glass Fiber Hybrid Composites: The Effect of Staking Sequence,” Colloid & Polymer, Vol. 22, No. 1, 2001, pp. 80-89.

[7]   R. C. Laible, “Fibrous Armor,” In: R. C. Laible, Ed., Ballistic Materials and Penetration Mechanics, Elsevier Scientific Publishing Co., New York, 1980, pp. 73-115. doi:10.1016/B978-0-444-41928-6.50009-0

[8]   P. M. Cunniff, “An Analysis of the System Effects in Woven Fabrics under Ballistic Impact,” Textile Research Journal, Vol. 62, No. 9, 1992, pp. 495-509.

[9]   C. T. Lim, V. B. C. Tan and C. H. Cheong, “Perforation of High-Strength Double-Ply Fabric System by Varying Shaped Projectiles,” International Journal of Impact Engineering, Vol. 27, No. 6, 2002, pp. 577-591. doi:10.1016/S0734-743X(02)00004-0

[10]   D. A. Shockey, D. C. Erlich and J. W. Simons, “Improved Barriers to Turbine Engine Fragments: Interim Report III,” Report No. DOT/FAA/AR-99/8, 2004.

[11]   J. S. Lim, B. H. Lee, C. B. Lee and I. S. Han, “Effect of the Weaving Density of Aramid Fabrics on Their Resistance to Ballistic Impacts,” Engineering, Vol. 4, 2012, pp. 944-949. doi:10.4236/eng.2012.412A119

[12]   V. C. Tan, V. P. W. Shim and X. Zeng, “Modeling Crimp in Woven Fabrics Subjected to Ballistic Impact,” International Journal of Impact Engineering, Vol. 32, No. 1-4, 2005, pp. 561-574. doi:10.1016/j.ijimpeng.2005.06.008

[13]   P. M. Cunniff, “Dimensionless Parameters for Optimization of Textile-Based Body Armor Systems,” Proceedings of the 18th International Symposium on Ballistics, San Antonio, 1999, pp. 1303-1310.

[14]   S. Bazhennov, “Dissipation of Energy by Bullet Proof Aramid Fabric,” Journal of Materials Science, Vol. 32, No. 15, 1997, pp. 4167-4173. doi:10.1023/A:1018674528993

[15]   H. L. Gower, D. S. Cronin and A. Plumtree, “Ballistic Impact Response of Laminated Composite Panels,” International Journal of Impact Engineering, Vol. 35, No. 9, 2008, pp. 1000-1008. doi:10.1016/j.ijimpeng.2007.07.007

 
 
Top