AJCC  Vol.2 No.2 , June 2013
Three Dimensional Numerical Modeling of Flow and Pollutant Transport in a Flooding Area of 2008 US Midwest Flood
ABSTRACT
This paper presents the development and application of a three-dimensional numerical model for simulating the flow field and pollutant transport in a flood zone near the confluence of the Mississippi River and Iowa River during the US Midwest Flood in 2008. Due to a prolonged precipitation event, a levee along the Iowa River just upstream of Oakville, Iowa broke, and the small town was completely flooded for a couple of weeks. During this period, the high water level in the flood zone reached about 2.5 metersabove the ground, and wind was the major force for the flow circulation. It was observed that some pollutants were leaked from the residential and farming facilities and transported into the flood zone. Leaking of pollutants from these facilities was reported by different news media during the flood and was identified using high resolution satellite imagery. The developed 3D numerical model was first validated using experimental measurements, and then applied to the flood inundated zone in Oakville for simulating the unsteady hydrodynamics and pollutant transport. The simulated pollutant distributions were generally in good agreement with the observed data obtained from satellite imagery.

Cite this paper
X. Chao, A. Hossain and Y. Jia, "Three Dimensional Numerical Modeling of Flow and Pollutant Transport in a Flooding Area of 2008 US Midwest Flood," American Journal of Climate Change, Vol. 2 No. 2, 2013, pp. 116-127. doi: 10.4236/ajcc.2013.22012.
References
[1]   National Climatic Data Center, “Climate of 2008 Midwestern US Flood Overview,” 2008. http://www.ncdc.noaa.gov/oa/climate/research/2008/flood08.html

[2]   Federal Emergency Management Agency (FEMA), “Midwest Floods of 2008 in Iowa and Wisconsin,” Report FEMA P-765, October 2009.

[3]   S. M. Linhart and D. A. Eash, “Floods of May 30 to June 15, 2008, in the Iowa River and Cedar River Basins, Eastern Iowa,” US Geological Survey, Open-File Report 2010-1190, Reston, Virginia, 2010.

[4]   Wikipedia, “Iowa Flood of 2008,” 2008. http://en.wikipedia.org/wiki/Iowa_flood_of_2008.

[5]   A. G. Breed, “Flooding: A Greater Disaster Is Yet to Be Felt,” 2008. http://newearthsummit.org/forum/index.php?topic=143.0

[6]   J. A. McCorquodale, I. Georgiou, C. Chilmakuri, M. Martinez and A. J. Englande, “Lake Hydrodynamics and Recreational Activities in the South Shore of Lake Pontchartrain, Louisiana,” Technical Report for NOAA, University of New Orleans, 2005.

[7]   Z. G. Ji, “Hydrodynamics and Water Quality Modelling River, Lakes, and Estuaries,” Wiley-Interscience, Hoboken, 2008. doi:10.1002/9780470241066

[8]   M. R. Ernst and J. Owens, “Development and Application of a WASP Model on a Large Texas Reservoir to Assess Eutrophication Control,” Lake and Reservoir Management, Vol. 25, No. 2, 2009, pp. 136-148. doi:10.1080/07438140902821389

[9]   C. F. Cerco and T. Cole, “User’s Guide to the CE-QUALICM: Three-Dimensional Eutrophication Model,” Technical Report EL-95-15, US Army Corps of Engineers, Vicksburg, 1995.

[10]   M. S. Dortch, M. Zakikhani, S. C. Kim and J. A. Steevens, “Modeling Water and Sediment Contamination of Lake Pontchartrain Following Pump-Out of Hurricane Katrina Floodwater,” Journal of Environmental Management, Vol. 87, No. 3, 2008, pp. 429-442. doi:10.1016/j.jenvman.2007.01.035

[11]   Y. Jia, S. Scott, Y. Xu, S. Huang and S. S. Y. Wang, “Three-Dimensional Numerical Simulation and Analysis of Flows around a Submerged Weir in a Channel Bendway,” Journal of Hydraulic Engineering, Vol. 131, No. 8, 2005, pp. 682-693. doi:10.1061/(ASCE)0733-9429(2005)131:8(682)

[12]   J. Smagorinsky, “Large Eddy Simulation of Complex Engineering and Geophysical Flows,” In: B. Galperin and S. A. Orszag, Eds., Evolution of Physical Oceanography, Cambridge University Press, Cambridge, 1993, pp. 3-36.

[13]   I. K. Tsanis, “Simulation of Wind-Induced Water Currents,” Journal of Hydraulic Engineering, Vol. 115, No. 8, 1989, pp. 1113-1134. doi:10.1061/(ASCE)0733-9429(1989)115:8(1113)

[14]   C. Koutitas and B. O’Connor, “Modeling Three-Dimensional Wind-Induced Flows,” Journal of Hydraulic Engineering, Vol. 106, No. 11, 1980, pp. 1843-1865.

[15]   K. R. Jin, J. H. Hamrick and T. Tisdale, “Application of Three Dimensional Hydrodynamic Model for Lake Okeechobee,” Journal of Hydraulic Engineering, Vol. 126, No. 10, 2000, pp. 758-771. doi:10.1061/(ASCE)0733-9429(2000)126:10(758)

[16]   W. Huang and M. Spaulding, “3D Model of Estuarine Circulation and Water Quality Induced by Surface Discharges,” Journal of Hydraulic Engineering, Vol. 121, No. 4, 1995, pp. 300-311. doi:10.1061/(ASCE)0733-9429(1995)121:4(300)

[17]   F. J. Rueda and S. G. Schladow, “Dynamics of Large Polymictic Lake. II: Numerical Simulations,” Journal of Hydraulic Engineering, Vol. 129, No. 2, 2003, pp. 92101. doi:10.1061/(ASCE)0733-9429(2003)129:2(92)

[18]   X. Chao, Y. Jia, F. D. Shields Jr., S. S. Y. Wang and M. C. Charles, “Three-Dimensional Numerical Modeling of Water Quality and Sediment-Associated Processes with Application to a Mississippi Delta Lake,” Journal of Environmental Management, Vol. 91, No. 7, 2010, pp. 1456-1466. doi:10.1016/j.jenvman.2010.02.009

[19]   X. Chao, Y. Jia, S. S. Y. Wang and A. K. M. A. Hossain, “Numerical Modeling of Surface Flow and Transport Phenomena with Applications to Lake Pontchartrain,” Lake and Reservoir Management, Vol. 28, No. 1, 2012, pp. 31-45. doi:10.1080/07438141.2011.639481

[20]   R. V. Thomann and J. A. Mueller, “Principles of Surface Water Quality Modeling and Control,” Harper & Row Publication, New York, 1988.

[21]   R. E. Criss and T. M. Kusky, “Finding the Balance between Floods, Flood Protection, and River Navigation,” Saint Louis University, Center for Environmental Sciences, 2009.

[22]   National Broadcasting Company (NBC) News, “FEMA Flood Maps Are Full of Errors, Cities Say,” January 24, 2010. http://www.msnbc.msn.com/id/35045333/ns/weather/t/fema-flood-maps-are-full-errors-cities-say/#.UOcBwHdtQvw

[23]   National Committee on Levee Safety, “Levee Situation in the US,” 2012. http://www.leveesafety.org/lv_nation.cfm

[24]   Y. Zhang and Y. Jia, “CCHE Mesh Generator and User’s Manual,” Technical Report No. NCCHE-TR-2009-1, University of Mississippi, Oxford, 2009.

[25]   A. K. M. A. Hossain, G. Easson, V. J. Justice and D. Mita, “Mapping Flood Extent, Flood Dynamics, and Crop Damage Assessment Using Radar Imagery Analysis,” MidSouth Annual Engineering & Sciences Conference (MAESC), Oxford Conference Center Oxford, 17-18 May 2007.

[26]   T. M. Lillesand and R. W. Kiefer, “Remote Sensing and Image Interpretation,” 4th Edition, John Willey and Sons, Inc., Hoboken, 2000.

[27]   Y. Jia and S. S. Y. Wang, “Numerical Model for Channel Flow and Morphological Change Studies,” Journal of Hydraulic Engineering, Vol. 125, No. 9, 1999, pp. 924933. doi:10.1061/(ASCE)0733-9429(1999)125:9(924)

[28]   Y. Jia, S. S. Y. Wang and Y. Xu, “Validation and Application of a 2D Model to Channels with Complex Geometry,” International Journal of Computational Engineering Science, Vol. 3, No. 1, 2002, pp. 57-71. doi:10.1142/S146587630200054X

[29]   Y. Jia, et al., “Development of an Integrated Simulation Tool for Predicting Disastrous Flooding, Water Contamination, Sediment Transport and their Impacts on the Environment,” Technical Report, Task Order No: 40000647 04, The University of Mississippi, Oxford, 2012.

[30]   Y. Jia, A. K. M. A. Hossain and X. Chao, “Computational Modeling of Midwest Flood 2008: Levee Breaching and Flood Propagation,” ASCE World Environmental and Water Resources Congress, Reston, 2010, pp. 1298-1303.

[31]   X. Chao, N. J. Shankar and S. S. Y. Wang, “Development and Application of a Three-Dimensional Oil Spill Model for Singapore Coastal Waters,” Journal of Hydraulic Engineering, Vol. 129, No. 7, 2003, pp. 495-503. doi:10.1061/(ASCE)0733-9429(2003)129:7(495)

 
 
Top