JMP  Vol.1 No.4 , October 2010
Physical Properties of Lithium Containing Cadmium Phosphate Glasses
ABSTRACT
Lithium cadmium phosphate glasses were prepared by melt quench technique. These glasses contain a mole % composition of x% Li2O-(50-x)% CdO-50%P2O5. The quantity x varies from 0-40 mole%. The physical properties reported in this paper are mass density ρ, modulus of rigidity η, coefficient of linear expansion α, transition temperature Tg, Softening temperature Ts, Oxygen packing density, Molar volume and lithium ion concentration. The mass density, oxygen packing density, modulus rigidity, transition temperature and softening temperature show decreasing trend with increasing concentration of lithium ions in these glasses, where molar volume and coefficient of linear expansion increases with increasing concentration of Li2O.

Cite this paper
nullM. Altaf and M. Chaudhry, "Physical Properties of Lithium Containing Cadmium Phosphate Glasses," Journal of Modern Physics, Vol. 1 No. 4, 2010, pp. 201-205. doi: 10.4236/jmp.2010.14030.
References
[1]   M. Altaf, M. A. Chaudhry and S. A. Siddiqi, “Effect of Li2O on the Refractive Index and Optical Band Gap of Cad-mium Phosphate Glasses,” Journal of Materials Science and Technology, Vol. 12, No. 2, 2004, p. 150.

[2]   S. A. Siddiqi, M. Masih and A. Mateen, “Optical Band Gap in Cd-Mg Phos-phate Glasses,” Materials Chemistry and Physics, Vol. 40, No. 1, 1995, pp. 69-72.

[3]   B. Kumar, “Phosphate Glasses and Glass Ceramics Bio Materials,” Indian Ceramic Society, Vol. 44, No. 6, 1985, p. 123.

[4]   J. E. Pemberton, L. Latif Zadeh, J. P. Fletcher and S. H. Risbub, “Non-linear optical properties,” Chemistry of Materials, Vol. 3, No. 1, 1991, p. 195.

[5]   A. Mogus-Milankovic, A. Santic, A. Gajovic and D. E. Day, “Elec-trical Properties of Sodium Phosphate Glasses Containing Al2O3 and/or Fe2O3,” Journal of Non-Crystalline Solids, Vol. 296, No. 1, 2001, pp. 57-64.

[6]   M. Ahmad, F. Salman, M. Morsi, K. El-Badry and F. Metwall, “Electrical Proties of Some Cop-per-Containing Phosphate Glasses,” Journal of Materials Science, Vol. 41, No. 5, 2006, pp. 1667-1669.

[7]   A. Pan and A. Ghosh, “Structural and Optical Properties of Lithium Bis-muthate Glasses,” Materials Research Society, Vol. 17, No. 8, 2002, p. 1941.

[8]   G. Y. Guo and Y. L. Chen, “Optical Prop-erties of a Chemically Durable Phosphate Glass,” Journal of Materials Science Letters, Vol. 12, No. 5, 1993, pp. 265-267.

[9]   G. W. Morey, “The Properties of Glasses,” 2nd Edition, Reinhold Publishing Corporation, New York, 1960.

[10]   D. G. Holloway, “The Physical Properties of Glass,” Wykeham Publications Ltd., London, 1973.

[11]   W. D. Kingery, “Introduction to Ceramics,” John Willy and Sons, Inc., NewYork, 1960.

[12]   M. A. Chaudhry and M. Altaf, “Elec-trical Properties of Na2o-CdO-P2O5 Glasses,” Modern Physics Letters B, Vol. 14, No. 9, 2000, pp. 319-326.

[13]   M. Altaf and M. A. Chaudhry, “Study of Some Physical Properties of Cad-mium Lanthanum Phosphate Glasses,” Journal of Materials Science and Technology, Vol. 13, No. 1, 2005, p. 33.

[14]   K. Othmer, “Encyclopedia of Chemical Technology,” Clanrendon Press, Oxford, Vol. 11, 1963.

[15]   D. S. Rao and P. P. Karat, “Elastic Constants of Glasses in the System P2O5-Na2O-ZnO,” Physics & Chemistry of Glasses, Vol. 35, No. 3, 1994, p. 124.

[16]   A. P. N. de Oliveira, L. B., C. Leonelli, T. Manfredini, and G. C. Pellacani, “Physical Properties of Quenched Glasses in the Li2O-ZrO-SiO2 System,” Journal of American Ceramic Society, Vol. 79, No. 4, 1996, pp. 1092- 1097.

[17]   M. Farley and G. A. Saunders, “The Application of Small Polaron Theory to Transition Metaloxide Theory,” Physica Status Solidi (a), Vol. 28, 1975, p. 199.

 
 
Top