OJCE  Vol.3 No.2 A , June 2013
Efficiency of Amino Alcohols as Corrosion Inhibitors in Reinforced Concrete
ABSTRACT

The objective of this paper is to investigate the behaviour of amino alcohol corrosion inhibitors when they are used in reinforced cement mortars either as admixtures in the cement paste or as coating applications on the surface of the rebars. The reinforced cement mortars were exposed to both partial and full immersion in 3.5 wt% NaCl solution. Electrochemical measurements such as half-cell potential and linear polarization technique, as well as weight loss of the embedded rebars were performed in order to obtain information on the corrosion behaviour of the reinforcing steel in cement mortar. Results demonstrate that the amino alcohol corrosion inhibitors offer protection against rebar corrosion in cement mortars.


Cite this paper
I. Vyrides, E. Rakanta, T. Zafeiropoulou and G. Batis, "Efficiency of Amino Alcohols as Corrosion Inhibitors in Reinforced Concrete," Open Journal of Civil Engineering, Vol. 3 No. 2, 2013, pp. 1-8. doi: 10.4236/ojce.2013.32A001.
References
[1]   U. Nürberger, “Korrosionsschutz im Massivbau,” Expert Verlag, Bobligen, 1991.

[2]   G. Batis and P. Pantazopoulou, “Advantages of the Simoultaneous Use Of Corrosion Inhibitors and Inorganic Coating,” Cement and Concrete Technology in the 2000s Second International Symposium, Instabul, 6-10 September 2000, pp. 474-483.

[3]   M. J. Gaidis, “Chemistry of Corrosion Inhibitors,” Cement & Concrete Composites, Vol. 26, No. 3, 2004, pp. 181-189. doi:10.1016/S0958-9465(03)00037-4

[4]   M. Pourbaix, “Atlas of Electrochemical Equilibria in Aqueous Solutions,” Pergamon Press, Oxford, 1966.

[5]   J. P. Broomfield, “Assessing Corrosion Damage on Reinforced Concrete Structures,” Proceedings of the International Conference Corrosion and Corrosion of Steel in Concrete, Sheffield, 24-28 July 1994, pp. 1-25.

[6]   C. M. Hansson, L. Mammoliti and B. B. Hope, “Corrosion Inhibitors in Concrete-Part I: The Principles,” Cement and Concrete Research, Vol. 28, No. 12, 1998, pp. 1775-1781. doi:10.1016/S0008-8846(98)00142-2

[7]   L. Fedrizzi, F. Azzolini and P. L. Bonora, “The Use of Migrating Corrosion Inhibitors to Repair Motorways Concrete Structures Contaminated by Chlorides,” Cement and Concrete Research Vol. 35, No. 3, 2005, pp. 551-561. doi:10.1016/j.cemconres.2004.05.018

[8]   M. Ormellese, M. Berra, F. Bolzoni and T. Pastore, “Corrosion Inhibitors for Chlorides Induced Corrosion in Reinforced Concrete Structures,” Cement and Concrete Research, Vol. 36, No. 3, 2006, pp. 536-547. doi:10.1016/j.cemconres.2005.11.007

[9]   M. Duprat, N. Bui and F. Dabosi, “Corrosion-NACE,” Vol. 35, No. 9, 1979, p. 392. doi:10.5006/0010-9312-35.9.392

[10]   M. Duprat and F. Dabosi, “Corrosion-NACE,” Vol. 37, No. 2, 1981, p. 89. doi:10.5006/1.3593851

[11]   U. Maeder, “A New Class of Corrosion Inhibitors for Reinforced Concrete,” Proceedings in the 9th Asian-Pacific Corrosion Control Conference, “Corrosion Prevention for Industrial Safety and Environmental Control”, Taiwan, 1995, pp. 825-830.

[12]   A. Welle, J. Liao, K. Kaiser, M. Grunze, U. Mader and N. Blank, “Interactions of N,N-Dimethylaminoethanol with Steel Surfaces in Alkaline and Chloride Containing Solutions,” Applied Surface Science, Vol. 119, No. 3-4, 1997, pp. 185-190. doi:10.1016/S0169-4332(97)00216-X

[13]   I. Martínez, C. Andrade, N. Rebolledo, L. Luo and G. De Schutter, “Corrosion-Inhibitor Efficiency Control: Comparison by Means of Different Portable Corrosion Rate Meters,” Corrosion: The Journal of Science and Engineering, Vol. 66, No. 2, 2010, pp. 026001-026001-12. doi:10.5006/1.3319663

[14]   Hellenic Organization for Standardization ELOT 452, “Determination of Total Hg Content to Water with Atomic Absorption Spectroscopy,” Athens, 1983.

[15]   Hellenic Organization for Standardization ELOT 1421-3, “Steel for the Reinforcement of Concrete—Weldable Reinforcing Steel—Part 3: Technical Class B500C,” Athens, 2005.

[16]   ISO/DIS 8407.3, “Procedures for removal of corrosion products from corrosion test specimen,” Genève, Switzerland, 1986.

[17]   A. Routoulas, P. Pantazopoulou and G. Batis, “Evaluation of Parameters Influencing Reinforcement Corrosion by Means of a Strain Gauge Technique,” Anti-Corrosion Methods and Materials, Vol. 50, No. 4, 2003, pp. 271-279. doi:10.1108/00035590310482505

[18]   F. Wombacher, U. Maeder and B. Marazzani, “Aminoalcohol based mixed corrosion inhibitors,” Cement & Con crete Composites, Vol. 26, No. 3, 2004, pp. 209-216. doi:10.1016/S0958-9465(03)00040-4

[19]   A. S. Abdulrahman, I. Mohammad and S. H. Mohammad, “Corrosion Inhibitors for Steel Reinforcement in Concrete: A Review,” Scientific Research and Essays, Vol. 6, No. 20, 2011, pp. 4152-4162.

[20]   ASTM C 876-91, “Standard Test Method for Half-Cell Potential of Reinforcing Steel in Concrete,” Annual Book of ASTM Standards. ASTM International, West Consho hocken, 1991.

[21]   European Concerted Action COST 509, “Corrosion and Protection of Metals in Contact with Concrete: Part 2. Monitoring,” Final Report, European Commission, Brussel, 1997, p. 73.

[22]   J. P. Broomfield, “Condition Evaluation, Corrosion of Steel in Concrete,” E&FN SPON, London, 1997. doi:10.4324/9780203414606

[23]   H. E. Jamil, M. F. Montemor, R. Boulif, A. Shriri and M. G. S. Ferreira, “An Electochemica and Analytical Approach to the Inhibition Mechanism of an Amino-Alcohol-Based Corrosion Inhibitor for Reinforced Concrete,” Electrochemica Acta, Vol. 48, No. 23, 2003, pp. 3509-3518. doi:10.1016/S0013-4686(03)00472-9

[24]   E. Jamil, A. Shriri, R. Boulif, A. C. Bastos, M. F. Montemor and M. G. S. Ferreira, “Electrochemical Behaviour of Amino Alchohol Based Inhibitors Used to Control Corrosion of Reinforcing Steel,” Electrochemica Acta, Vol. 49, No. 17-18, 2004, pp. 2753-2760. doi:10.1016/j.electacta.2004.01.041

[25]   H. E. Jamil, A. Shriri, R. Boulif, M. F. Montemor and M. G. S. Ferreira, “Corrosion Behaviour of Reinforcing Steel Exposed to an Amino Alcohol Based Corrosion Inhibitor,” Cement and Concrete Composites, Vol. 27, No. 6, 2005, pp. 671-678.

[26]   M. Sánchez and C. Alonso, “Accelerated Transport of Corrosion Inhibitors as Complementary Methodology for Electrochemical Chlorides Extraction Method,” 2nd International Conference on Concrete Repair, Rehabilitation and Retrofitting, Cape Town, 24-26 November 2008, pp. 289-290.

[27]   J. Kubo, S. Sawada, C. L. Page and M. M. Page, “Electrochemical Inhibitor Injection for Control of Reinforcement Corrosion in Carbonated Concrete,” Materials and Corrosion, Vol. 59, No. 2, 2008, pp. 107-114. doi:10.1002/maco.200804161

[28]   H. Zheng, W. Li, F. Ma and Q. Kong, “The Effect of a Surface-Applied Corrosion Inhibitor on the Durability of Concrete,” Construction and Building Materials, Vol. 37, 2012, pp. 36-40. doi:10.1016/j.conbuildmat.2012.07.007

[29]   M. Ormellese, F. Bolzoni, L. Lazzari and P. Pedeferri, “Effect of Corrosion Inhibitors on the Initiation of Chloride-Induced Corrosion on Reinforced Concrete Structures,” Materials and Corrosion, Vol. 59, No. 2, 2008, pp. 98-106. doi:10.1002/maco.200804155

[30]   T. A. Nguyen and X. Shi, “A Mechanistic Study of Corrosion Inhibiting Admixtures,” Anti-Corrosion Methods and Materials, Vol. 56, No. 1, 2009, pp. 3-12. doi:10.1108/00035590910923400

 
 
Top