ETSN  Vol.2 No.2 , June 2013
Power-Aware Wireless Communication System Design for Body Area Networks
ABSTRACT
With the explosive development of wireless communication and low power embedded techniques, Body Area Network (BAN) has opened up new frontiers in the race to provide real-time health monitoring. IEEE 802 has established a Task Group called IEEE 802.15.6 inNovember 2007 and aims to establish a communication standard optimized for low power, high reliability applied to medical and non-medical application for BANs. This paper overviews the path loss model and the communication scheme for implant-to-body surface channel presented by IEEE 802.15.6 standard. Comparing with the standard scheme where BCH (Bose-Chaudhuri-Hochquenghem) code is employing, we propose a new coding solution using convolutional code operating with Bit Interleaver based on the properties of implant-to-body surface channel. To analyze the performance of the two Error Correct Coding (ECC) schemes, we performed simulations in terms of Bit Error Rate (BER) and power consumption on MATLAB and FPGA platform, respectively. The simulation results proved that with appropriate constraint length, convolutional code has a better performance not only in BER, but also in minimization of resources and power consumption.

Cite this paper
L. Wang, N. An, A. Sodhro, D. Qiao, Y. Zhou and Y. Li, "Power-Aware Wireless Communication System Design for Body Area Networks," E-Health Telecommunication Systems and Networks, Vol. 2 No. 2, 2013, pp. 23-28. doi: 10.4236/etsn.2013.22004.
References
[1]   X. L. Chen, X. Y. Lu, D. P. Jin, L. Su and L. G. Zeng, “Channel Modeling of UWB-Based Wireless Body Area Networks,” IEEE International Conference on Communications, Kyoto, 5-9 June 2011, pp. 1-5.

[2]   D. Lewis, Ed., “IEEE 802.15.6 Call for Applications Summary,” November 2008.

[3]   K. S. Kwak, S. Ullah and N. Ullah, “An Overview of IEEE 802.15.6 Standard,” 3rd International Symposium on Applied Sciences in Biomedical and Communication Technologies, Rome, 7-10 November 2010, pp. 1-6.

[4]   M. E. Madkour, S. E. Soliman, P. K. Varshney, M. I. Moawad and F. E. A. El-Samie, “Coding and Interleaving Schemes for Wireless Sensor Networks,” 28th International Conference on Informatics and Systems (INFOS), Cairo, 14-16 May 2012, pp. 68-73.

[5]   I. M. Choi, K. H. Won and H.-J. Choi, “Group Manchester Code Modulation for Medical In-Body WBAN Systems,” 17th Asia-Pacific Conference on Communications (APCC), 2-5 October 2011, pp. 867-871. doi:10.1109/APCC.2011.6152930

[6]   J. H. Choi and H. G. Ryu, “Design and Perrmance Analysis of PSPK Modulation for WBAN,” 2010 IEEE International Conference on Wireless Information Technology and Systems, Honolulu, 28 August 2010-3 September 2010, pp. 1-4.

[7]   C. Lee, J. Kim, H. S. Lee and J. Kim, “Physical Layer Designs for WBAN Systems in IEEE 802.15.6 Proposals,” 9th International Symposium on Communications and Information Technology, Icheon, 28-30 September 2009, pp. 841-844.

[8]   B. Choi, B. Kim, S. Lee, K. Wang, Y. Kim and D. Chung, “Narrowband Physical Layer Design for WBAN System,” 1st International Conference on Pervasive Computing Signal Processing and Applications, Harbin, 17-19 September 2010, pp. 154-157.

[9]   C. A. Otto, E. Jovanov and A. Milenkovic, “A WBANBased System for Health Monitoring at Home,” IEEE/ EMBS International Summer School, Medical Devices and Biosensors, Cambridge, 4-6 September 2006, pp. 20-23.

[10]   C. K. Ho and M. R. Yuce, “Low Data Rate Ultra Widend ECG Monitoring System,” IEEE Engineering in Medicine and Biology Society Conference, Callaghan, August 2008, pp. 3413-3416.

[11]   M. R. Yuce, P. C. Ng and J. Y. Khan, “Monitoring of Physiological Parameters from Multiple Patients Using Wireless Sensor Network,” Journal of Medical Systems, Vol. 32, No. 5, 2008, pp. 433-441. doi:10.1007/s10916-008-9149-5

[12]   M. Hamalainen, A. Taparugssanagorn and J. Iinatti, “On the WBAN Radio Channel Modeling for Medical Application,” Proceedings of the 5th European Conference on Antennas and Propagation, Rome, 11-15 April 2011, pp. 2967-2971.

[13]   IEEE P802.15-08-0780-09-0006, “IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs),” April 2009.

[14]   “IEEE Standard for Local and Metropolitan Area Networks,” IEEE, 2012.

[15]   J. Hagedorn, J. Terrill, W. B. Yang, K. Sayrafian, K. Yazdandoost and R. Kohno, “A Statistical Path Loss Model for MICS,” Tokyo, 13-16 September 2009, pp. 2995-2999.

[16]   M. R. Islam, “Error Correction Codes in Wireless Sensor Network: An Energy Aware Approach,” International Journal of Computer and Information Engineering, Vol. 4, No. 1, 2010, p. 59.

[17]   Y. J. Wu, “Low Power Decoding of BCH Codes,” Proceedings of the 2004 International Symposium on Circuits and Systems, Ottawa, 23-26 May 2004, pp. 369-372.

[18]   S. Wei and L. Brackenbury, “Pre-Processing of Convolutional Codes for Reducing Decoding Power Consumption,” IEEE International Conference on Pre-Acoustics, Speech and Signal Processing, Las Vegas, 31 March 2008-4 April 2008, pp. 2957-2960.

[19]   http://engineering.mq.edu.au/~gfang/WBAN%20project/wban.htm

[20]   A. Katariya, A. Yadav, N. Jain and G. Tomar, “BER Comparison of RS and BCH Coded OFDM Transmission over Noisy Channel,” International Conference on Computational Intelligence and Communication Networks (CICN), Gwalior, 7-9 October, 2011, pp. 227-232.

[21]   B. K. Dass and R. Verma, “Repeated Burst Error Detecting Linear Codes,” Ratio Mathematica, Vol. 19, 2009, pp. 25-30.

[22]   A. Said, “Error Burst Detection with High-Rate Convotional Codes,” Proceedings of the 1995 IEEE International Symposium on Information Theory, Whistler, 17-22 September 1995, p. 226.

[23]   D. W. Richard and M. C. John, “Joint Interleaver and Trellis Code Design,” IEEE Global Telecommunications Conference, Phoenix, 3-8 November 1997, pp. 939-943.

 
 
Top