SGRE  Vol.4 No.2 , May 2013
Sizing and Design of the PV-WIND Energy Dryer for Medical Herbs
ABSTRACT
Medical herbs are located in Egypt in different areas and they are very important to increase the national income of Egypt. It is necessary to dry the herbs in their growing locations. As the growing locations are located far from the natural supply grid of Egypt, renewable energy sources such as PV&WIND are preferably utilized to achieve the drying process. Moreover, since the drying process is actually used to remove water from the herbs, thus it can preserve the herbs in storage drastically by preventing the attack of microorganisms during the moist conditions of herbs and also reduce their weight and bulk (for cheaper transport). Where, this paper selects, at first, the suitable drying site, and then it suggests. The suggested drying system is completely designed, and includes the following three systems: the solar thermal system, the dryer, and the renewable energy system.

Cite this paper
E. Sweelem, A. Nafeh and F. Fahmy, "Sizing and Design of the PV-WIND Energy Dryer for Medical Herbs," Smart Grid and Renewable Energy, Vol. 4 No. 2, 2013, pp. 217-226. doi: 10.4236/sgre.2013.42027.
References
[1]   M. R. Patel, “Wind and Solar Power Systems,” Library and Congress, Washington DC, 1999.

[2]   M. Yahya, K. Sopian, W. R. W. Daud, M. Y. Othman and B. Yatim, “Design of Solar Assisted Dehumidification of Air Drying System for Medicinal Herbs: Pegaga Leaf,” Proceedings of the 2nd Asian-Oceania Drying Conference (ADC 2001), Pulau Pinang, 20-22 August 2001, pp. 383392.

[3]   “Effects of Drying on Quality of Rosemary and Thyme Plants Produced in the Chaing Mai District, Thailand,” Master Thesis of Marija Spirovska. http://www.troz.uni-hohenheim.de/research/Thesis/MScFT/Spirovska.pdf

[4]   “Solar Laboratory University of the Philippines, Diliman-, Renewable Energy Technology in Asia, A Regional Research Dissemination Programme Phase II, A Summary of Activities and Achievements in Bangladesh,” Regional Energy Resources Information Center (RERIC), Asian Institute of Technology, Thailand, 2002.

[5]   B. K. Bala, M. R. A. Mondol , B. K. Biswas , B. L. Das Chowdury and S. Janjai , “Solar Drying of Pineapple Using Solar Tunnel Drier,” Journal of Renewable Energy, Vol. 28, No. 2, 2003, pp. 183-190. doi:10.1016/S0960-1481(02)00034-4

[6]   O’Hanian and C. Hans, “Physics,” W. W. Norton & Co., New York, 1985.

[7]   E. W. Brown, “An Introduction to Solar Energy.” http://www.ccs.neu.edu/home/feneric/solar.html.

[8]   T. Markvart, “Solar Electricity,” John Wiley & Sons, Inc., Hoboken, 1994.

[9]   O. V. Ekechukwu and B. Norton, “Review of Solar-Energy Drying Systems II: An Overview of Solar Drying Technology,” Journal of Energy Conversion & Management, Vol. 40, No. 6, 1999, pp. 615-655.

[10]   “Commercialization of the Solar Dryer.” http://www.areed.org/training/technology/solar_dryer dryer_2.pdf

[11]   G. P. Sharma and S. Prasad, “Drying of Garlic Cloves by Microwave-Hot Air Combination,” Journal of Food Engineering, Vol. 50, No. 2, 2001, pp. 99-105. doi:10.1016/S0260-8774(00)00200-4

[12]   www.handsdownsoftware.com

[13]   H. H. El-Ghetany, “Effect of Hot Water Consumption on Temperature Distributions in Vertical and Horizontal Solar Waterv Storage Tanks,” M.Sc.Thesis, Cairo University, Cairo, 1992.

[14]   NREL, “Hybrid Optimization for Electric Renewable Program,” NREL (National Renewable Energy Laboratory), Golden, 2009.

[15]   R. Chedid and Y. Saliba, “Optimization and Control of Autonomous Renewable Energy Systems,” International Journal of Energy Research, Vol. 20, No. 7, 1996, pp. 609-624. doi:10.1002/(SICI)1099-114X(199607)20:7<609::AID-ER176>3.0.CO;2-O

[16]   W. Clark, “Energy for Survival: The Alternative to Extinction,” Anchor Press, Garden City, 1974.

 
 
Top