OJST  Vol.3 No.2 , May 2013
Comparison of resin composite restorations microleakage: An in-vitro study
ABSTRACT

The aim of this study was to compare the microleakage of total-etch and self-etch adhesives by three methods including dye extraction, dye penetration and fluid filtration with determining the correlation value among these techniques. Seventy-two premolar teeth were selected for this in vitro study and Class 5 cavities were prepared on the buccal surface of these at the cementoenamel junction area. It was applied for half of these cavities, Optibond Solo Plus (OSP) (two-step etch & rinse) and another half, Optibond All-in-One (OA) (one-step self-etch) and then all of them were restored with a light cure resin composite; Herculite XRV. Then samples were divided randomly into three subgroups based on the method of microleakage measurement (n = 12). In the first pair group, leakage was assessed by the dye extraction method. Dye penetration and fluid filtration methods were used in the second and third pair groups for the same purpose respectively. Data were analyzed by Paired t-test and Wilcoxon test and correlation coefficients (α = 0.05). There was no significant difference in the dye extraction (P = 0.657) and dye penetration (P = 0.732) methods between the microleakage of total-etch and self-etch adhesives. Microleakage of self-etch adhesive in fluid filtration technique was significantly more than total-etch adhesive (P = 0.012). No significant correlation was found among the results obtained with the three methods of microleakage evaluation. Adhesive systems showed variously behave in different methods of microleakage assessment.


Cite this paper
Moosavi, H. , Yazdi, F. , Moghadam, F. and Soltani, S. (2013) Comparison of resin composite restorations microleakage: An in-vitro study. Open Journal of Stomatology, 3, 209-214. doi: 10.4236/ojst.2013.32036.
References
[1]   Hegde, M.N., Vyapaka, P. and Shetty, S. (2009) A comparative evaluation of microleakage of three different newer direct composite resins using a self etching primer in class V cavities: An in vitro study. Journal of Conservative Dentistry, 12, 160-163. doi:10.4103/0972-0707.58340

[2]   Moosavi, H., Moazzami, S.M., Loh, S. and Salari, S. (2010) Microleakage evaluation of core buildup composite resins with total-etch and self-etch adhesive systems. Journal of Contemporary Dental Practice, 11, e009-e016.

[3]   Hashimoto, M., Ohno, H., Kaga, M., Endo, K., Sano, H. and Oguchi, H. (2000) In vivo degradation of resin-dentin bonds in humans over 1 to 3 years. Journal of Dental Research, 79, 1385-1391. doi:10.1177/00220345000790060601

[4]   De Munck, J., Van Meerbeek, B., Yoshida, Y., Inoue, S., Vargas, M., Suzuki, K., Lambrechts, P. and Vanherle, G. (2003) Four-year water degradation of total-etch adhesives bonded to dentin. Journal of Dental Research, 82, 136-140. doi:10.1177/154405910308200212

[5]   Ermis, R.B., Van Landuyt, K.L., Cardoso, M.V., De Munck, J., Van Meerbeek, B. and Peumans, M. (2012) Clinical effectiveness of a one-step self-etch adhesive in non-carious cervical lesions at 2 years. Clinical Oral Investigations, 16, 889-897. doi:10.1007/s00784-011-0565-4

[6]   Van Meerbeek, B., De Munck, J., Yoshida, Y., Inoue, S., Vargas, M., Vijay, P., Van Landuyt, K., Lambrechts, P. and Vanherle, G. (2003) Buonocore memorial lecture. Adhesion to enamel and dentin: Current status and future challenges. Operative Dentistry, 28, 215-235.

[7]   Wang, Y. and Spencer, P. (2005) Continuing etching of an all-in-one adhesive in wet dentin tubules. Journal of Dental Research, 84, 350-354. doi:10.1177/154405910508400411

[8]   Van Landuyt, K.L., Mine, A., De Munck, J., Jaecques, S., Peumans, M., Lambrechts, P. and Van Meerbeek, B. (2009) Are one-step adhesives easier to use and better performing? Multifactorial assessment of contemporary one-step self-etching adhesives. Journal of Adhesive Dentistry, 11, 175-190.

[9]   Bradna, P., Vrbova, R., Dudek, M., Roubickova, A. and Housova, D. (2008) Comparison of bonding performance of self-etching and etch-and-rinse adhesives on human dentin using reliability analysis. Journal of Adhesive Dentistry, 10, 423-429.

[10]   Sadeghi, M. (2009) Influence of flowable materials on microleakage of nanofilled and hybrid class II composite restorations with LED and QTH LCUs. Indian Journal of Dental Research, 20, 159-163. doi:10.4103/0970-9290.52891

[11]   Swift Jr., E.J., Triolo Jr., P.T., Barkmeier, W.W., Bird, J.L. and Bounds, S.J. (1996) Effect of low-viscosity resins on the performance of dental adhesives. American Journal of Dentistry, 9, 100-104.

[12]   Unlu, N., Krakaya, S., Ozer, F. and Say, E. (2003) Reducing microleakage in composite resin restorations: An in vitro study. European Journal of Prosthodontic Restorative Dentistry, 11, 171-175.

[13]   Manuja, N. and Nagpal, R. (2012) Resin-tooth interfacial morphology and sealing ability of one-step self-etch adhesives: Microleakage and SEM study. Microscopy Research and Technique, 75, 903-909. doi:10.1002/jemt.22011

[14]   Koliniotou-Koumpia, E., Dionysopoulos, P. and Koumpia, E. (2004) In vitro evaluation of microleakage from composites with new dentin adhesives. Journal of Oral Rehabilitation, 31, 1014-1022. doi:10.1111/j.1365-2842.2004.01323.x

[15]   Bracket, W.W., Haisch, L.D., Pearce, M.G. and Brackett, M.G. (2004) Microleakage of Class V resin composite restorations placed with self-etching adhesives. Journal of Prosthetic Dentistry, 91, 42-45. doi:10.1016/j.prosdent.2003.10.003

[16]   Gregoire, G., Guignes, P.H. and Millas, A. (2005) Effect of self-etching adhesives and dentin permeability in a fluid flow model. Journal of Prosthetic Dentistry, 93, 56- 63. doi:10.1016/j.prosdent.2004.10.008

[17]   Brackett, M.G., Brackett, W.W. and Haisch, L.D. (2006) Microleakage of Class V resin composites placed using self-etching resins: Effect of prior enamel etching. Quintessence International, 37, 109-113.

[18]   Deliperi, S., Bardwell, D.N. and Wegley, C. (2007) Restoration interface microleakage using one total-etch and three self-etch adhesives. Operative Dentistry, 32, 179- 184. doi:10.2341/06-54

[19]   Camps, J. and Pashley, D. (2003) Reliability of the dye penetration studies. Journal of Endodontic, 29, 595-599. doi:10.1097/00004770-200309000-00012

[20]   De Gee, A.J., WU, M.K. and Wesselink, P.R. (1994) Sealing properties of Ketac-Endo glass ionomer cement and AH26 root canal sealers. International Endodontic Journal, 27, 239-244. doi:10.1111/j.1365-2591.1994.tb00262.x

[21]   Pommel, L., Jacquot, B. and Camps, J. (2001) Lack of correlation among three methods for evaluation of apical leakage. Journal of Endodontics, 27, 347-350. doi:10.1097/00004770-200105000-00010

[22]   Leevailoj, C., Cochran, A., Matis, B.A., Moore, B.K. and Platt, J.A. (2001) Microleakage of posterior packable resin compositeswith and without flowable liners. Operative Dentistry, 26, 302-307.

[23]   Jain, P. and Belcher, M. (2000) Microleakage of Class II resin based composite restorations with flowable composite in the proximal box. American Journal of Dentistry, 13, 235-238.

[24]   Moosavi, H., Moghaddas, M.J., Ghoddusi, J. and Rajabi, O. (2010) Effects of two antioxidants on the microleakage of resin-based composite restorations after nonvital bleaching. The Journal of Contemporary Dental Practice, 11, E033-E040.

[25]   Breschi, L., Mazzoni, A., Ruggeri, A., Cadenaro, M., DiLenarda, R. and De Stefano Dorigo, E. (2008) Dental adhesion review: Aging and stability of the bonded interface. Dental Materials, 24, 90-101. doi:10.1016/j.dental.2007.02.009

[26]   Mitsui, F.H., Bedran-de-Castro, A.K., Ritter, A.V., Cardoso, P.E. and Pimenta, L.A. (2003) Influence of load cycling onmarginal microleakage with two self-etching and two one-bottle dentin adhesive systems in dentin. Journal of Adhesive Dentistry, 5, 209-216.

[27]   Pradelle-Plasse, N., Wenger, F., Picard, B. and Colon, P. (2004) Evaluation of microleakage of composite resin restorationsby an electrochemical technique: The impedance methodology. Dental Materials, 20, 425-434. doi:10.1016/j.dental.2003.06.003

[28]   Vaidyanathan, T.K. and Vaidyanathan, J. (2009) Recent advances in the theory and mechanism of adhesive resin bonding to dentin: A critical review. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 88, 558-578. doi:10.1002/jbm.b.31253

[29]   Loguercio, A.D., Bittencourt, D.D., Baratieri, L.N. and Reis, A. (2007) A 36-month evaluation of self-etch and etch-and-rinse adhesives in non-carious cervical lesions. The Journal of the American Dental Association, 138, 507-514.

[30]   Khoroushi, M. and Aghelinejad, S. (2011) Effect of postbleaching application of an antioxidant on enamel bond strength of three different adhesives. Medicina Oral, Patología Oral y Cirugía Bucal, 16, e990-e996. doi:10.4317/medoral.17127

[31]   Kubo, S., Kawasaki, K., Yokota, H. and Hayashi, Y. (2006) Five-year clinical evaluation of two adhesive systems in non-carious cervical lesions. Journal of Dentistry, 34, 97-105. doi:10.1016/j.jdent.2005.04.003

[32]   Peumans, M., De Munck, J., Van Landuyt, K., Lambrechts, P. and Van Meerbeek, B. (2007) Five-year clinical effectiveness of a two-step self-etching adhesive. Journal of Adhesive Dentistry, 9, 7-10.

[33]   Park, J., Eslick, J., Ye, Q., Misra, A. and Spencer, P. (2011) The influence of chemical structure on the properties in methacrylate-based dentin adhesives. Dental Materials, 27, 1086-1093. doi:10.1016/j.dental.2011.07.011

[34]   Itoh, S., Nakajima, M., Hosaka, K., Okuma, M., Takahashi, M., Shinoda, Y., Seki, N., Ikeda, M., Kishikawa, R., Foxton, R.M. and Tagami, J. (2010) Dentin bond durability and water sorption/solubility of one-step self-etch adhesives. Dental Materials Journal, 29, 623-630. doi:10.4012/dmj.2010-028

[35]   Manhart, J., Yan Chen, H., Mehl, A., Weber, K. and Hichel, R. (2001) Marginal quality and microleakage of adhesive Class V restorations. Journal of Dentistry, 29, 123-130. doi:10.1016/S0300-5712(00)00066-X

[36]   Yazici, A.R., Baseren, M. and Dayangac, B. (2002) The effect of current-generation bonding systems on microleakage of resin composite restorations. Quintessence International, 33, 763-769.

 
 
Top