Dynamic Friction Behaviors of Pneumatic Cylinders

Show more

References

[1] L. E. Schroeder and R. Sigh, “Experimental Study of Friction in a Pneumatic Actuator at Constant Velocity,” Journal of Dynamic Systems, Measurement, and Control, Vol. 115, No. 3, 1993, pp. 575-577.
doi:10.1115/1.2899143

[2] G. Sc Belforte, G. Mattiazzo and S. Mauro, “Measurement of Friction Force in Pneumatic Cylinders,” Tribotest Journal, Vol. 10, No. 1, 2003, pp. 33-48.
doi:10.1002/tt.3020100104

[3] B. M. Y. Nouri, “Friction Identification in Mechatronic Systems,” ISA Transactions, Vol. 43, No. 2, 2004, pp. 205216. doi:10.1016/S0019-0578(07)60031-7

[4] B. Armstrong-Helouvry, P. Dupont and C. Canudas de Wit, “A Survey of Models, Analysis Tools and Compensation Methods for the Control of Machines with Friction,” Automatica, Vol. 30, No. 7, 1994, pp. 1083-1138.
doi:10.1016/0005-1098(94)90209-7

[5] D. A. Haessig Jr. and B. Friedland, “On the Modeling of Friction and Simulation,” Journal of Dynamic Systems, Measurement, and Control, Vol. 113, No. 3, 1991, pp. 354362. doi:10.1115/1.2896418

[6] C. Canudas de Wit, H. Olsson, K. J. ?str?m and P. Linschinsky, “A New Model for Control of Systems with Friction,” IEEE Transactions on Automatic Control, Vol. 40, No. 3, 1995, pp. 419-425. doi:10.1109/9.376053

[7] P. E. Dupont and E. P. Dunlop, “Friction Modeling and PD Compensation at Very Low Velocities,” Journal of Dynamic Systems, Measurement, and Control, Vol. 117, No. 1, 1995, pp. 8-14. doi:10.1115/1.2798527

[8] J. Swevers, F. Al-Bencer, C. G. Ganseman and T. Prajogo, “An Integrated Friction Model Structure with Improved Presliding Behavior for Accurate Friction Compensation,” IEEE Transactions on Automatic Control, Vol. 45, No. 4, 2000, pp. 675-686. doi:10.1109/9.847103

[9] P. Dupont, V. Hayward, B. Armstrong and F. Altpeter, “Single State Elastoplastic Friction Models,” IEEE Transactions on Automatic Control, Vol. 47, No. 5, 2002, pp. 787-792. doi:10.1109/TAC.2002.1000274

[10] H. Yanada and Y. Sekikawa, “Modeling of Dynamic Behaviors of Friction,” Mechatronics, Vol. 18, No. 7, 2008, pp. 330-339. doi:10.1016/j.mechatronics.2008.02.002

[11] H. Yanada, K. Takahashi and A. Matsui, “Identification of Dynamic Parameters of Modified LuGre Model and Application to Hydraulic Actuator,” Transactions of the Japan Fluid Power System Society, Vol. 40, No. 4, 2009, pp. 57-64. doi:10.5739/jfps.40.57

[12] X. B. Tran, A. Matsui and H. Yanada, “Effects of Viscosity and Type of Oil on Dynamic Behaviors of Friction of Hydraulic Cylinder,” Transactions of the Japan Fluid Power System Society, Vol. 41, No. 2, 2010, pp. 28-35.

[13] X. B. Tran, N. Hafizah and H. Yanada, “Modeling of Dynamic Friction Behaviors of Hydraulic Cylinders,” Mechatronics, Vol. 22, No. 1, 2012, pp. 65-75.
doi:10.1016/j.mechatronics.2011.11.009

[14] G. Li, C. Zhang, J. Luo, S. Liu, G. Xie and X. Lu, “FilmForming Characteristics of Grease in Point Contact under Swaying Motions,” Tribology Letters, Vol. 35, No. 1, 2009, pp. 57-65. doi:10.1007/s11249-009-9433-7

[15] J. Sugimura, W. R. Jones, Jr. and H. A. Spikes, “EHD Film Thickness in Non-Steady State Contacts,” Journal of Tribology, Vol. 120, No. 3, 1998, pp. 442-453.
doi:10.1115/1.2834569