GSC  Vol.3 No.2 , May 2013
Green Cycle: Sulfate Sorption from Natural Water on Anionic Clay Compound Obtained from Industry Wastewater
ABSTRACT
In this paper we are describing a green cycle process. The first step was a novel hydrotalcite-like compound (HTLC) synthesized by a co-precipitating method, under standard ambient temperature and pressure, using chemical industry wastewater rich in divalent and trivalent cations, activated by a thermal treatment and finally characterized by scanning electron microscopy (SEM), energy dispersive X-ray fluorescence (EDS) and thermogravimetric analysis (TGA). The second step was a series of batch sorption tests performed with this activated HTLC and untreated underground sulfurous water from the state of Puebla, México. The HTLC calcined at 500°C/3 h exhibited the best sorption ability for ions, demonstrated a decrease of the hardness and sulfate ions to below the regional legal standards for drinking water. Once inactive after being used in water treatment, the sorbed ions were removed by ion exchange in a carbonate-containing solution, resulting in an 80% recycling of the material which upon activation demonstrated a retained capacity for water treatment. This recyclability suggests the exciting possibility of this novel compound as an efficient “green” technology in water treatment processes.

Cite this paper
G. Rosano-Ortega, C. Lebrún, J. Oglesby, S. Gallegos, D. Cruz-González and B. Armendariz, "Green Cycle: Sulfate Sorption from Natural Water on Anionic Clay Compound Obtained from Industry Wastewater," Green and Sustainable Chemistry, Vol. 3 No. 2, 2013, pp. 48-55. doi: 10.4236/gsc.2013.32009.
References
[1]   G. Rosano-Ortega, “Evaluación de Hidrotalcita Industrial Para el Tratamiento del Agua Sulfatada del Valle de Puebla,” Master Degree Dissertation, Universidad Autónoma del Estado de México (UAEM), Toluca, 2003.

[2]   S. J. Palmer, L. M. Grand and R. L Frost, “Thermal Analysis of Hydrotalcite Synthesized from Aluminate Solutions,” Journal of Thermal Analysis and Calorimetry, Vol. 103, No. 2, 2011, pp. 473-478. doi:10.1007/s10973-010-1004-5

[3]   S. J. Palmer, R. L. Frost and T. Nguyen, “Thermal Decomposition of Hydrotalcite with Molybdate and Vandate Anions in the Interlayer,” Journal of Thermal Analysis and Calorimetry, Vol. 92, No. 3, 2008, pp. 879-886. doi:10.1007/s10973-007-8642-2

[4]   G. Fetter, E. Ramos, M. T. Olguín, P. Bosch, T. López, and S. Bulbulian, “Sorption of 131I- by Hydrotalcites,” Journal of Radioanalytical and Nuclear Chemistry, Vol. 221, No. 1-2, 1997, pp. 63-66. doi:10.1007/BF02035243

[5]   J. S. Wu, Y. K. Xiao, J. Y. Wan and L. R. Wen, “The Growth Mechanism of Hydrotalcite Crystal,” Science China Technological Sciences, Vol. 55, No. 4, 2012, pp. 872-878.

[6]   S. P. Newman, W. Jones, P. O’Connor and D. N. Stamires, “Synthesis of the 3R2 Polytype of a Hydrotalcite-Like Mineral,” Journal of Materials Chemistry, Vol. 12, No. 2, 2002, pp. 153-155. doi:10.1039/b110715c

[7]   H. Khaled and S. Ezzeddine, “Using Kaolinitic Clay for Preparation of a Hydrotalcite-Like Compound,” Materials Sciences and Applications, Vol. 2, No. 6, 2011, pp. 684-691.

[8]   I. F. Alexa, R. F. Popovici and M. Ignat, “Non-Toxic Nanocomposite Containing Captopril Intercalated into Green Inorganic Carrier,” Digest Journal of Nanomaterials and Biostructures, Vol. 6, No. 3, 2011, pp. 1091-1101.

[9]   Z. Q. Yang, K.-M. Choi and N. Z. Jiang, “Microwave Synthesis of Hydrotalcite by Urea Hydrolysis,” Bulletin of the Korean Chemical Society, Vol. 28, No. 11, 2007, pp. 2029-2033. doi:10.5012/bkcs.2007.28.11.2029

[10]   V. Dávila, E. Lima, S. Bulbulian and P. Bosch, “Mixed Mg(Al)O Oxides Synthesized by the Combustion Method and Their Recrystallization to Hydrotalcites,” Microporous and Mesoporous Materials, Vol. 107, No. 3, 2008, pp. 240-246. doi:10.1016/j.micromeso.2007.03.013

[11]   T. W. Kim, M. Sahimi and T. T. Tsotsis, “Preparation of Hydrotalcite Thin Films Using an Electrophoretic Technique,” Industrial & Engineering Chemistry Research, Vol. 47, No. 23, 2008, pp. 9127-9132. doi:10.1021/ie071446s

[12]   M. R. Othman, Z. Helwani, F. Martunus and W. J. N. Fernando, “Synthetic Hydrotalcites from Different Routes and Their Application as Catalysts and Gas Adsorbents: A Review,” Applied Organometallic Chemistry, Vol. 23, No. 9, 2009, pp. 335-346. doi:10.1002/aoc.1517

[13]   R. Salomao, L. M. Milena, H. H. Wakamatsu and V. C. Pandolfelli, “Hydrotalcite Synthesis via Co-Precipitation Reactions Using MgO and Al(OH)3 Precursors,” Ceramics International, Vol. 37, No. 8, 2011, pp. 3063-3070.

[14]   T. Qi, W. Z. Yin and L. Zhang, “Synthesis of Hydrotalcite Using Brucite as the Source of Magnesium,” Advanced Materials Research, Vol. 158, 2011, pp. 241-247. doi:10.4028/www.scientific.net/AMR.158.241

[15]   Y. Liu, E. Lotero, J. G. Goodwin and X. Mo, “Transesterification of Poultry Fat with Methanol Using Mg-Al Hydrotalcite Derived Catalysts,” Applied Catalysis A: General, Vol. 331, 2007, pp. 138-148. doi:10.1016/j.apcata.2007.07.038

[16]   S.-L. Wang and X.-M. Song, “Synthesize and Application of Mg-Al Hydrotalcite in Flame Retardant Paper Preparation,” Advanced Materials Research, Vol. 174, 2011, pp. 362-365.

[17]   M. Eisgruber, J. Ladebeck, J. Koy, H. Schiessling, W. Buckl and H. Ebert, “Method for the Production of Hydrotalcites,” United State Patent No. 7, 2011, pp. 1-11.

[18]   A. W. Nursulihatimarsyila, K. Y. Cheah, T. G. Chuah, W. L. Siew and T. S. Y. Choong, “Deoiling and Regeneration Efficiencies of Spent Bleaching,” American Journal of Applied Sciences, Vol. 7, No. 3, 2010, pp. 434-437. doi:10.3844/ajassp.2010.434.437

[19]   O. Meyer, F. Roessner, R. A. Rakoczy and R. W. Fischer, “Impact of Organic Interlayer Anions in Hydrotalcite Precursor on the Catalytic Activity of Hydrotalcite-Derived Mixed Oxides,” ChemCatChem, Vol. 2, No. 3, 2010, pp. 314-321.

[20]   Q. Zhang and F. Saito, “Novel Waste Processing by Means of Mechanochemical Treatment,” Materials Science Forum, Vol. 561-565, 2007, pp. 1569-1573. doi:10.4028/www.scientific.net/MSF.561-565.1569

[21]   American Public Health Association, “Standard Methods for the Examination of Water and Wastewater,” 19th Edition, American Water Works Association, and Water Pollution Control Federation, American Public Health Association, Washington, 1995, p. 1050.

[22]   A. Kawamoto, T. Suzuki, N. Kiba and T. Sato, “Regeneration and Reuse of Hydrotalcite-Like Anion Exchanger with High Selectivity to Phosphate Anion,” Journal of the Society of Inorganic Materials, Japan, Vol. 10, 2003, pp. 167-172.

[23]   K. Frantisek, E. Kovácsová and D. Kolousek, “Removal of Anions from Solution by Calcined Hydrotalcite and Regeneration of Used Sorbent in Repeated Calcination-Rehydration-Anion Exchange Processes,” Collection of Czechoslovak Chemical Communications, Vol. 64, No. 9, 2009, pp. 1517-1528.

[24]   S. Miyata and A. Okada, “Synthesis of Hydrotalcite Like Compounds and Their Physico-Chemical Properties— The Systems Mg2+-Al3+-SO42- and Mg2+-A13+-CrO42-,” Clays and Clay Minerals, Vol. 25, 1977, pp. 14-18. doi:10.1346/CCMN.1977.0250103

[25]   E. Heraldy, S. J. Santosa and K. Wijaya, “Synthesis of Mg/Al Hydrotalcite-Like from Brine Water and Its Application for Methyl Orange Removal: A Preliminary Study,” Makara Science Serie, Vol. 15, 2011, pp. 9-14.

[26]   G. Mondragón-Gutiérrez, D. Cruz, H. Pfeiffer and S. Bulbulian, “Low Temperature Synthesis of Li2SiO3: Effect on Its Morphological and Textural Properties,” Research Letters in Materials Science, Vol. 2008, 2008, pp. 1-4. doi:10.1155/2008/908654

[27]   V. Rives, “Layered Double Hydroxides: Present and Future,” Nova Science Publishers, Inc., New York, 2001, p. 350.

[28]   Z. Li, Y. Song, J. Wang, Q. Liu, P. Yang and M. Zhang, “Study of Structural Transformations and Phases Formation upon Calcination of Zn-Ni-Al Hydrotalcite Nanosheets,” Bulletin of Materials Science, Vol. 34, No. 2, 2011, pp. 183-189. doi:10.1007/s12034-011-0060-1

[29]   M. J. Kang, S. W. Rhee and H. Moon, “Sorption of MO4- (M = Tc, Re) on Mg/Al Layered Double Hydroxide by Anion Exchange,” Radiochimica Acta, Vol. 75, 1996, pp. 169-173.

[30]   Federal Official Newspaper, “NOM-127-SSA1-1994,” Health Secretariat, 1994. http://www.salud.gob.mx/unidades/cdi/nom/127ssa14.html

[31]   M. S. Martínez-Gallegos, H. Pfeiffer, E. Lima, M. Espinosa, P. Bosch and S. Bulbulian, “Cr(VI) Immobilization in Mixed (Mg,Al) Oxides,” Microporous and Mesoporous Materials, Vol. 94, No. 1-3, 2006, pp. 234-242.

[32]   L. M. Parker, N. B. Milestone and R. H. Newman, “The Use of Hydrotalcite as an Anion Absorbent,” Industrial & Engineering Chemistry Research, Vol. 34, No. 4, 1995, pp. 1196-1202. doi:10.1021/ie00043a023

[33]   S. A. Exyco, “Geohydrological Aquifer Study of Puebla Valley,” Management Studies and Projects of the National Water Commission and Ministry of Agriculture and Water Resour

 
 
Top