Back
 EPE  Vol.5 No.3 , May 2013
Toward Implementing HH the Amir Declaration of 2% Electricity Generation by Solar Energy in 2020
Abstract: The utility solar power plants were reviewed and classified by two basic groups: direct thermal concentrating solar power (CSP) and photovoltaic (PV). CSP as Parabolic Trough Collector (PTC) of 100 MW solar power plants (SPP) is suggested and suitable to provide solar thermal power for Qatar. Although, LFC had enough experience for small projects, it is still need to work in large scale plant such as 100 MW and couple with multi effect distillation (MED) to confirm costs.
Cite this paper: M. Darwish, A. Hassan and R. Mohtar, "Toward Implementing HH the Amir Declaration of 2% Electricity Generation by Solar Energy in 2020," Energy and Power Engineering, Vol. 5 No. 3, 2013, pp. 245-258. doi: 10.4236/epe.2013.53024.
References

[1]   M. Darwish and R. Mohtar, “Qatar Energy Footprint,” Submitted for Publication to the Journal of Energy Strat egy.

[2]   M. Mendelsohn, T. Lowder and B. Canavan, “Utility Scale Concentrating Solar Power and Photovoltaic Projects: A Technology and Market Overview,” Prepared under Task No. SM10.2442 Technical Report, NREL/ TP-6A20-51137, 2012.

[3]   Appendix A, “Key Assumptions for Levelized Cost of Electricity Ranges”. http://www.ucsusa.org/assets/documents/clean_energy/Appendix-Key-Assumptions-Levelized-Costs.pdf

[4]   “Final Report on Technical Data, Costs, and Life Cycle Inventories of Solar Thermal Power Plants,” Project No: 502687, NEEDS New Energy Externalities Developments for Sustainability Integrated Project. http://www.needs-project.org/RS1a/RS1a%20D12.2%
20Final%20report%20concentrating%20solar%20thermal%20 power%20plants.pdf


[5]   Concentrated Thermal Power Now. http://www.greenpeace.org/raw/content/
international/press/reports/Concentrated-Solar-Thermal-Power.pdf


[6]   Utility Scale Solar Power Plants; Guide for Developers and Investors, International Finance Corporation (IFC), World Bank Group, 2012.

[7]   M. J. Wagner, “Results and Comparison from the SAM Linear Fresnel Technology Performance Model Preprint,” 2012 World Renewable Energy Forum, Denver, 13-17 May 2012, p. 2.

[8]   “Puerto Errado 2 Thermosolar Power Plant (PE2),” Concentrating Solar Projects, National Renewable Energy Laboratory, 2012. http://www.nrel.gov/csp/solarpaces/project_detail.cfm/projectID=159

[9]   “Planta Solar 20,” Concentrating Solar Projects, National Renewable Energy Laboratory, 2012. http://www.nrel.gov/csp/solarpaces/project_detail.cfm/projectID=39

[10]   NREL Concentrating Solar Project, Maricopa Solar Project (Maricopa) Plant. http://www.nrel.gov/csp/solarpaces/project_detail.cfm/projectID=58

[11]   P. R. Fraser, “Stirling Dish System Performance Prediction Model,” M.Sc. Thesis, Mechanical Engineering Department, University of Wisconsin, Madison, 2008.

[12]   NREL Concentrating Solar Project, Maricopa Solar Project (Maricopa) Plant. http://www.nrel.gov/csp/solarpaces/project_detail.cfm/projectID=58

[13]   24 MW, SinAn, South Korea. http://www.conergy.com.au/PortalData/1/Resources/master/images
references/freefield/Solar_farm_SinAn.pdf


[14]   AM0100, “Integrated Solar Combined Cycle (ISCC) Projects—Version 1.0.0”. https://cdm.unfccc.int/methodologies/DB/BES7OQGMZYOMCP9JPTVJHP93BVK4UO

[15]   M. Darwish, H. K. Abdulrahim and R. Mohtar, “Solar Power Desalting Plant in Qatar: Design and Analysis,” LAP LAMBERT Academic Publishing, Saarbrücken, 2012.

[16]   P. Gilman and A. Dobos, “System Advisor Model, SAM 2011.12.2: General Description,” Technical Report, NREL/ TP-6A20-53437, 2012. http://www.nrel.gov/docs/fy12osti/53437.pdf

 
 
Top