Back
 EPE  Vol.5 No.3 , May 2013
A Model for Regional Energy Utilization by Offline Heat Transport System and Distributed Energy Systems—Case Study in a Smart Community, Japan
Liyang Fan, Weijun Gao, Zhu Wang
Show more
Abstract: Under the Kyoto Protocol,Japanwas supposed to reduce six percent of the green house gas (GHG) emission in 2012. However, until the year 2010, the statistics suggested that the GHG emission increased 4.2%. What is more challenge is, afterFukushimacrisis, without the nuclear energy,Japanmay produce about 15 percent more GHG emissions than1990 inthis fiscal year. It still has to struggle to meet the target set by Kyoto Protocol. The demonstration area of “smart community” suggests Japanese exploration for new low carbon strategies. The study proposed a demand side response energy system, a dynamic tree-like hierarchical model for smart community. The model not only conveyed the concept of smart grid, but also built up a smart heat energy supply chain by offline heat transport system. Further, this model promoted a collaborative energy utilization mode between the industrial sector and the civil sector. In addition, the research chose the smart community inKitakyushuas case study and executed the model. The simulation and the analysis of the model not only evaluate the environmental effect of different technologies but also suggest that the smart community inJapanhas the potential but not easy to achieve the target, cut down 50% of the CO2 emission.
Keywords: Smart Community; Demand Side Response; Distributed Energy System; Reutilize Factory Exhaust Heat; Offline Heat Transport System
Cite this paper: L. Fan, W. Gao and Z. Wang, "A Model for Regional Energy Utilization by Offline Heat Transport System and Distributed Energy Systems—Case Study in a Smart Community, Japan," Energy and Power Engineering, Vol. 5 No. 3, 2013, pp. 190-205. doi: 10.4236/epe.2013.53019.
References

[1]   C. Sollia, R. Anantharaman, A. H. Str?mmana, X. Zhanga and E. G. Hertwicha, “Evaluation of Different CHP Op tions for Refinery Integration in the Context of a Low Carbon Future,” International Journal of Greenhouse Gas Control, Vol. 3, No. 2, 2009, pp. 152-160. doi:10.1016/j.ijggc.2008.07.008

[2]   R. Evans, “Environmental and Economic Implications of Small-Scale CHP,” Energy Policy, Vol. 21, No. 1, 1993, pp. 79-91. doi:10.1016/0301-4215(93)90211-W

[3]   M. Wissner, “The Smart Grid—A Saucerful of Secrets?” Applied Energy, Vol. 88, No. 7, 2011, pp. 2509-2518. doi:10.1016/j.apenergy.2011.01.042

[4]   Government’s New Growth Strategy. http://www.kantei.go.jp/jp/sinseichousenryaku/sinseichou01.pdf

[5]   B. B. Alagoz, A. Kaygusuz and A. Karabiber, “A User Mode Distributed Energy Management Architecture for Smart Grid Applications,” Energy, Vol. 44, No. 1, 2012, pp. 167-177. doi:10.1016/j.energy.2012.06.051

[6]   B. V. Mathiesen, H. Lund and K. Karlsson, “100% Renewable Energy Systems, Climate Mitigation and Economic Growth,” Applied Energy, Vol. 88, No. 2, 2011, pp. 488-501. doi:10.1016/j.apenergy.2010.03.001

[7]   O. Elma and U. S. Selamogullari, “A Comparative Sizing Analysis of a Renewable Energy Supplied Stand-Alone House Considering Both Demand Side and Source Side Dynamics,” Applied Energy, Vol. 96, 2012, pp. 400-408. doi:10.1016/j.apenergy.2012.02.080

[8]   M. Welsch, M. Howells, M. Bazilian, J. F. DeCarolis, S. Hermann and H. H. Rogner, “Modelling Elements of Smart Grids—Enhancing the OSeMOSYS (Open Source Energy Modelling System) Code,” Energy, Vol. 46, No. 1, 2012, pp. 337-350. doi:10.1016/j.energy.2012.08.017

[9]   R. S. Adhikari, N. Aste and M. Manfren, “Multi-Commodity Network Flow Models for Dynamic Energy Man agement—Smart Grid Applications,” Energy Procedia, Vol. 14, 2012, pp. 1374-1379. doi:10.1016/j.egypro.2011.12.1104

[10]   Introduction of Offline Heat Transport System, SANKI. http://www.sanki.co.jp/product/thc/thc/point.html

[11]   R. Niemi, J. Mikkola and P. D. Lund, “Urban Energy Systems with Smart Multi-Carrier Energy Networks and Renewable Energy Generation,” Renewable Energy, Vol. 48, 2012, pp. 524-536.

[12]   Heat Supply System Offline Using the Latent Heat Storage Material-Heat Transformer Container System, 2009.3, JEFMA No. 57, pp. 53-55.

[13]   M. Medrano, M. O. Yilmaz, M. Nogués, I. Martorell, J. Roca and L. F. Cabeza, “Experimental Evaluation of Commercial Heat Exchangers for Use as PCM Thermal Storage Systems,” Applied Energy, Vol. 86, No. 10, 2009, pp. 2047-2055. doi:10.1016/j.apenergy.2009.01.014

[14]   H. Kiyoto, “Study on the Exhaust Thermal Energy Utilization by Using the PCM Transportation System,” Summaries of Technical Papers of Annual Meeting Architectural Institute of Japan, 20 July 2008, pp. 747-748.

[15]   O. Lab, “Consumption Unit of Electricity, Heating, Cooling and Hot Water,” Waseda University, Tokyo, 2002.

[16]   H. Ren, “Effect of Carbon Tax and Electricity Buy-Back on the Optimal Economic Adoption of PV System for Residential Buildings,” Journal of Environmental Engineering, Vol. 622, 2007, pp. 49-55.

[17]   Introduction of Offline Heat Transport System, SANKI. http://www.sanki.co.jp/product/thc/thc/point.html

[18]   L. Y. Fan, “Potential Analysis on the Area-Wide Factory Exhaust Thermal Energy Utilization by PCM Transportation System in a Recycling-Oriented Community,” Sum maries of Technical Papers of Annual Meeting, Architectural Institute of Japan, Kyushu Chapter, Vol. 51, 1 March 2012, pp. 341-344.

[19]   Highlighting JAPAN July 2011, “Stepping Stones to ‘Smart’ ness,” 2011. dl.gov-online.go.jp/public_html/gov/pdf/hlj/.../12-13.pdf

 
 
Top