JFCMV  Vol.1 No.1 , April 2013
Non-Axisymmetric Mass Transfer Phenomenon behind an Orifice in a Curved Swirling Flow
Abstract: The purpose of this paper is to understand the mechanism of non-axisymmetric wall-thinning that caused a pipe break in the pipeline of the Mihama nuclear power plant in 2004. The wall thinning was caused by the flow accelerated corrosion which affects low carbon steel pipelines. The mass transfer rate measurement of the wall thinning behind an office in a curved swirling flow is carried out in a closed-circuit water tunnel using a benzoic acid dissolution method. The experimental results indicate that the high mass transfer rate is observed on one side of the pipe behind the orifice, which is similar to the observation of the wall-thinning rate in the Mihama case. This result suggests that the influence of the secondary flow in the long elbow combined with the swirling flow can produce the non-axisymmetric mass transfer phenomenon behind the orifice.
Cite this paper: T. Takano, T. Yamagata, Y. Sato and N. Fujisawa, "Non-Axisymmetric Mass Transfer Phenomenon behind an Orifice in a Curved Swirling Flow," Journal of Flow Control, Measurement & Visualization, Vol. 1 No. 1, 2013, pp. 1-5.

[1]   H. Keller, “Erosions Corrosion an Nassdampfturbien, VGB Kraftwerkstechnik, Vol. 54, No. 5, 1974, pp. 292-295.

[2]   T. Sydberger and U. Lotz, “Relation between Mass Transfer and Corrosion in a Turbulent Pipe Flow,” Journal of Electrochemical Society, Vol. 129, No. 2, 1982, pp. 276-283. doi:10.1149/1.2123812

[3]   L. E. Sanchez-Caldera, “The Mechanism of Corrosion-Erosion in Steam Extraction Lines of Power Station,” Ph.D. Thesis, Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, 1984.

[4]   R. B. Dooley and V. K. Chexal, “Flow-Accelerated Corrosion of Pressure Vessels in Fossil Plants,” International Journal of Pressure Vessels and Piping, Vol. 77, No. 2-3, 2000, pp. 85-90. doi:10.1016/S0308-0161(99)00087-3

[5]   J. M. Pietralik and C. S. Schefski, “Flow and Mass Transfer in Bends under Flow-Accelerated Corrosion Wall Thinning Condition,” Journal of Engineering for Gas Turbines and Power, Vol. 133, No. 1, 2011, Article ID: 012902. doi:10.1115/1.4001061

[6]   T. Kagawa, “Flow behind an Orifice in a Pipeline of Mihama Power Station,” Yomiuri Newspaper, 25 August 2004, p. 36. (in Japanese)

[7]   NISA, “Secondary Piping Rupture Accident at Mihama Power Station, Unit 3, of the Kansai Electric Power Co. Inc. (Final Report),” 2005.

[8]   K. Yoneda, R. Morita, M. Satake and I. Inada, “Quantitative Evaluation of Effective Factors on Flow Accelerated Corrosion (Part 2), Modelling of Mass Transfer Coefficient with Hydraulic Features at Wall,” CRIEPI Research Report, No. L07015, 2008, pp. 1-33. (in Japanese)

[9]   M. Ohkubo, S. Kanno, T. Yamagata, T. Takano and N. Fujisawa, “Occurrence of Asymmetrical Flow Pattern behind an Orifice in a Circular Pipe,” Journal of Visualization, Vol. 14, No. 1, 2011, pp. 15-17. doi:10.1007/s12650-010-0058-6

[10]   T. Yamagata, U. Sato, A. Ito, T. Takano and N. Fujisawa, “Effect of Schmidt Number on Mass Transfer Phenomenon behind an Orifice in a Circular Pipe,” Proceedings of 11th International Symposium on Fluid Control, Measurements and Visualization, Keelung, 2011, Paper 251.

[11]   N. Fujisawa, T. Yamagata, S. Kanno, A. Ito and T. Takano, “The Mechanism of Asymmetric Pipe-Wall Thinning behind an Orifice by Combined Effect of Swirling Flow and Orifice Bias,” Nuclear Engineering and Design, Vol. 252, 2012, pp. 19-26. doi:10.1016/j.nucengdes.2012.07.001

[12]   T. Takano, T. Yamagata, A. Ito and N. Fujisawa, “Mass Transfer Measurements behind an Orifice in a Circular Pipe Flow for Various Combinations of Swirl Intensity and Orifice Bias,” Journal of Power and Energy Systems, Vol. 6, No. 3, 2012, pp. 402-411. doi:10.1299/jpes.6.402

[13]   Y. Utanohara, Y. Nagaya, A. Nakamura and M. Murase, “Influence of Local Flow Field on Flow Accelerated Corrosion Downstream from an Orifice,” Journal of Power and Energy Systems, Vol. 6, No. 1, 2012, pp. 18-33. doi:10.1299/jpes.6.18

[14]   J. Lozar, C. Laguerie and J. P. Couderc, “Diffusivity of Benzoic Acid in Water: Influence of the Temperature,” Canadian Journal of Chemical Engineering, Vol. 53, No. 2, 1975, pp. 200-203. doi:10.1002/cjce.5450530208