IJNM  Vol.2 No.2 , April 2013
Factors Research on the Influence of Leaching Rate of Nickel and Cobalt from Waste Superalloys with Sulfuric Acid
ABSTRACT

Unlike the reported leaching technologies of waste superalloys, the process of the atomized spray-sulfuric acid leaching nickel and cobalt technology was put forward in the present work according to the compositions of waste superalloys. The effects of sulfuric acid temperature, concentration, leaching time, stirring speed and size of superalloys on leaching of Ni and Co from waste superalloys have been mainly investigated, and the optimum leaching conditions were determined and reported. The leaching rates for nickel and cobalt were 96.68% and 96.63%, respectively, and the contents of nickel and cobalt in leaching slag were 6.77% and 0.96%, respectively. The obtained leaching solution containing Ni and Co could be used for production of Ni and Co products after removal.


Cite this paper
Fan, X. , Xing, W. , Dong, H. , Zhao, J. , Wu, Y. , Li, B. , Tong, W. and Wu, X. (2013) Factors Research on the Influence of Leaching Rate of Nickel and Cobalt from Waste Superalloys with Sulfuric Acid. International Journal of Nonferrous Metallurgy, 2, 63-67. doi: 10.4236/ijnm.2013.22008.
References
[1]   A. L. Li, X. R. Zeng and L. M. Cao, “Current Status of Research on High Temperature Materials for Advanced Aircraft Engines,” Materials Review, Vol. 17, No. 2, 2003, pp. 26-28.

[2]   Q. L. Su, Z. W. Shi and J. Hunsaker, “Status and Consid eration of Recycling of Superalloys in Our Country,” Non-Ferrous Metals Recycling and Utilization, Vol. 4, 2006, pp. 19-20.

[3]   Y.-F. Shen, W.-Y. Xue and W.-Y. Niu, “Recovery of Co(Ⅱ) and Ni(Ⅱ) from Hydrochloric Acid Solution of Alloy Scrap,” Transaction of Nonferrous Metals Society of China, Vol. 18, No. 5, 2008, pp. 1262-1268.

[4]   J. H. Li, X. H. Li and Q. Y. Hu, “Study of Extraction and Purification of Ni, Co and Mn from Spent Battery Material,” Hydrometallurgy, Vol. 99, No. 1-2, 2009, pp. 7-12.

[5]   G. J. van Tonder and P. J. Cilliers, “Cobalt and Nickel Removal from Zincor Impure Electrolyte by Molecular Recognition Technology (MRT)-Pilot Plant Demonstration,” The Journal of The South African Institute of Ming an Metalleurgy, 2002, pp. 11-18.

[6]   Z. J. Yu, Q. M. Feng and L. M. Ou, “Leaching of Cobalt Bearing Metallic Matte in Sulfhuric Acid at Normal Pressure,” Journal of Central South University (Science and Technology), Vol. 37, No. 4, 2006, pp. 675-679.

[7]   M. V. Rane, V. H. Bafna and R. Sadanandam, “Recovery of High Purity Cobalt from Spentammonia Cracker Catalyst,” Hydrometallurgy, Vol. 77, No. 3-4, 2005, pp. 247-251. doi:10.1016/j.hydromet.2004.12.004

[8]   Y. J. Zheng, H. Teng and H. Q. Yan, “Nitric Acid Oxidation Leaching of Cobalt from Refractory High-Arenic Cobalt Ores,” The Chinese Journal of Nonferrous Metals, Vol. 20, No. 7, 2010, pp. 1418-1423.

[9]   N. J. Kang, “Development of Application of Hot Pressure Leaching Technology in Recovery of Nickel and Cobalt in China,” China Nonferrous Metallurgy, Vol. 24, No. 2, 1995, pp. 1-7.

[10]   J. H. Liu, H. R. Zhang and R. X. Wang, “Process of Ammonium Leaching Oxidation Ore of Cobalt and Cop per at High Pressure,” Chinese Journal of Rare Metals, Vol. 36, No. 1, 2012, pp. 149-153.

[11]   Y. F. Shen, W. Y. Xue and W. Li, “Selective Recovery of Nickel and Cobalt from Cobalt-Enriched Ni-Cu Matte by Two-Stage Counter-Current Leaching,” Separation and Purification Technology, Vol. 60, No. 2, 2008, pp. 113-119. doi:10.1016/j.seppur.2007.08.010

[12]   X. C. Hou, L. S. Xiao and C. J. Gao, “Experimental Study on Leaching of Nickel and Cobalt from Waste High-Temperature Ni-Co Alloys,” Hydrrometallurgy of China, Vol. 28, No. 3, 2009, pp. 164-169.

[13]   Y. M. Zhou and B. L. Hu, “Nickel and Cobalt Recovered from Cobalt-Nickel Matte Leaching Lixivium,” Nonferrous Metals (Extractive Metallurgy), Vol. 6, No. 4, 2012, pp. 11-13.

[14]   Y. B. Xu, Y. T. Xie and J. S. Liu, “Enrichment of Valu able Metals from the Sulfuric Acid Leach Liquors of Nickeliferous Oxide Ores,” Hydrometallurgy, Vol. 95, No. 1-2, 2009, pp. 28-32.

[15]   N. Pradhan, P. Singh and B. C. Tripathy, “Electrowining of Cobalt from Acidic Sulphate Solutions-Effect of Chloride Ion,” Minerals Engineering, Vol. 14, No. 7, 2001, pp. 775-783. doi:10.1016/S0892-6875(01)00072-3

[16]   W. P. Zhang, “Study on the Processing of Low-Co Cemented Carbide Scraps by Electrochemical Method,” Cenmented Carbide, Vol. 23, No. 2, 2006, pp. 107-109.

[17]   R. T. Jones, G. M. Denton and Q. G. Reynolds, “Recovery of Cobalt from Slag in a DC Arc Furnace at Chambishi, Zambia,” The Journal of the South African Institute of Mining and Metallurgy, 2002, pp. 5-10.

[18]   C. Arslan and F. Arslan, “Recvery of Copper, Cobalt and Zinc from Copper Smelter a Converter Slags,” Vol. 67, No. 1-3, 2002, pp. 1-7.

 
 
Top