We compared field based and airborne LiDAR-derived profile corridor measurements across forest canopy types and terrain ranging from 37% to 49% slope. Both LiDAR-derived DEM and raw LiDAR point elevations were compared to field data. Primary objectives included examining whether canopy type or terrain slope influenced LiDAR-derived profile measurements. A secondary objective included comparing cable logging payloads based on field measured profile elevations to payloads based on LiDAR-derived elevations. Average RMSE elevation errors were slightly lower for profile point to LiDAR DEM values (0.43 m) than profile point to nearest LiDAR elevation point (0.49 m) with differences being larger when sites within forest clearings were removed from analysis. No statistically significant relationship existed between field measured ground slopes and associated profile point and LiDAR DEM elevation differences but a mild correlation existed when LiDAR raw point elevation differences were compared. Our payload analysis determined the limiting payload distance and had consistent results across study sites. The DEM-based profile outperformed the nearest point profile by 5% on average. Results suggest that forest analysts should consider using the nearest LiDAR DEM value rather than the nearest LiDAR point elevation for terrain heights at discrete locations, particularly when forest canopy occludes locations of interest.
Cite this paper
M. Wing, M. Craven, J. Sessions and J. Wimer, "LiDAR-Derived DEM and Raw Height Comparisons along Profile Corridor Gradients within a Forest," Journal of Geographic Information System
, Vol. 5 No. 2, 2013, pp. 109-116. doi: 10.4236/jgis.2013.52011
 J. S. Evans, A. T. Hudak, R. Faux and A. M. S. Smith, “Discrete Return LiDAR in Natural Resources: Recommendations for Project Planning, Data Processing, and Deliverables,” Remote Sensing, Vol. 1, No. 4, 2009, pp. 776-794. doi:10.3390/rs1040776
 S. E. Reutebuch, R. J. McGaughey, H.-E. Andersen and W. W. Carson, “Accuracy of a High-Resolution LiDAR Terrain Model under a Conifer Forest Canopy,” Canadian Journal of Remote Sensing, Vol. 29, No. 5, 2003, pp. 527-535. doi:10.5589/m03-022
 M. E. Hodgson and P. Bresnahan, “Accuracy of Airborne LiDAR-Derived Elevation: Empirical Assessment and Error Budget,” Photogrammetric Engineering and Remote Sensing, Vol. 70, No. 3, 2004, pp. 331-339.
 J. Su and E. Bork, “Influence of Vegetation, Slope, and LiDAR Sampling Angle on DEM Accuracy,” Photogrammetric Engineering and Remote Sensing, Vol. 72, No. 11, 2006, pp. 1265-1274.
 K. Kraus and N. Pfeifer, “Determination of Terrain Models in Wooded Areas with Airborne Laser Scanner Data,” ISPRS Journal of Photogrammetry and Remote Sensing, Vol. 53, No. 4, 1998, pp. 193-203.
 L. M. Gomes and L. L. F. Pereira, “Janssen Suitability of Laser Data for DTM Generation: A Case Study in the Context of Road Planning and Design,” ISPRS Journal of Photogrammetry and Remote Sensing, Vol. 54, No. 4, 1999, pp. 244-253. doi:10.1016/S0924-2716(99)00018-0
 M. E. Hodgson, J. Jenson, G. Raber, J. Tullis, B. A. Davis, G. Thompson and K. Schuckman, “An evaluation of LiDAR-Derived Elevation and Terrain Slope in Leaf-Off Condition,” Photogrammetric Engineering and Remote Sensing, Vol. 71, No. 7, 2005, pp. 817-823.
 Watershed Sciences, “LiDAR Remote Sensing Data Collection: McDonald-Dunn Research Forest,” Watershed Sciences Inc., Corvallis, 2008.
 United States Forest Service (USFS), “Index of Programs,” 2010.