JEMAA  Vol.5 No.4 , April 2013
Simple Method to Change the Magnetic Resonant Frequencies of Short Wire Pairs
Abstract: Short wire pairs are simple metamaterial structures. This structure includes a dielectric substrate with metal strips on both sides, of which the electric and magnetic resonant frequencies can be controlled by adjusting the length of the metallic wires. However, to vary the magnetic resonant frequency requires a change in the length of the strip and another patterned photomask. In this investigation, a simple method is introduced that requires only one patterned photomask by shifting the position of faced wire pairs up and down.
Cite this paper: Y. Kokubo, "Simple Method to Change the Magnetic Resonant Frequencies of Short Wire Pairs," Journal of Electromagnetic Analysis and Applications, Vol. 5 No. 4, 2013, pp. 162-165. doi: 10.4236/jemaa.2013.54026.

[1]   D. R. Smith, W. J. Padilla, D. C. Vier, S. C. Nemat-Nas ser and S. Schultz, “Composite Medium with Simultane ously Negative Permeability and Permittivity,” Physical Review Letters, Vol. 84, No. 18, 2000, pp. 4184-4187. doi:10.1103/PhysRevLett.84.4184

[2]   J. Zhou, L. Zhang, G. Tuttle, T. Koschny and C. M. Soukoulis, “Negative Index Materials Using Simple Short Wire Pairs,” Physical Review B, Vol. 73, 2006, pp. 1-4, Article ID: 041101, doi:10.1103/PhysRevB.73.041101

[3]   R. W. Ziolkowski, “Design, Fabrication, and Testing of Double Negative Metamaterials,” IEEE Tranaction on. Antennas and Propagation, Vol. 51, No. 7, 2003, pp. 1516-1529. doi:10.1109/TAP.2003.813622

[4]   Murata Software Co., Ltd., “The Finite Element Analysis Software Package Femtet®Ver.11.1.1,” 2012.