MSA  Vol.4 No.3 , March 2013
Electrospark Coatings Based on WC-Co Alloys with Aluminium Oxide and Carbon Additives
ABSTRACT

The structure and properties of coatings based on WC-Co alloys containing additives of 1% - 5% aluminium oxide and 2.5% - 4.5% carbon were investigated. The coatings had a nanocrystalline structure. Depending on the duration and frequency of the discharge pulses, the ratio between WC and W2C in the coatings was different. The additives in the hard alloy allowed us increase the microhardness and wear resistance of the coatings by a factor of 2 - 3 in comparison to coatings created using a conventional WC-10%Co alloy.


Cite this paper
S. Pyachin, S. Nikolenko, A. Burkov and N. Suy, "Electrospark Coatings Based on WC-Co Alloys with Aluminium Oxide and Carbon Additives," Materials Sciences and Applications, Vol. 4 No. 3, 2013, pp. 186-190. doi: 10.4236/msa.2013.43022.
References
[1]   N. I. Lazarenko, “Electrospark Coating of Metal Surfaces,” M. Mashinostroenie, Russia, 1976, p. 44. (in Russian)

[2]   R. N Johnson and G. L. Sheldon, “Advances in the Electrospark Deposition Coating Process,” Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, Vol. 4, No. 6, 1986, pp. 2740-2746. doi:10.1116/1.573672

[3]   E. A. Brown, G. L. Sheldon and A. E. Bayoumi, “A Parametric Study of Improving Tool Life by Electrospark Deposition,” Wear, Vol. 138, No. 6, 1990, pp. 137-156. doi:10.1016/0043-1648(90)90173-8

[4]   A. V. Ribalko and O. Sahin, “A Modern Representation of the Behaviour of Electrospark Alloying of Steel by Hard Alloy,” Surface and Coatings Technology, Vol. 201, No. 3-4, 2006, pp. 1724-1730. doi:10.1016/j.surfcoat.2006.02.044

[5]   E. A. Levashov, E. I. Zamulaeva, A. E. Kudryashov, P. V. Vakaev, M. I. Petrzhik and A. Sanz, “Materials Science and Technological Aspects of Electrospark Deposition of Nanostructured WC-Co Coatings onto Titanium Substrates,” Plasma Processes and Polymers, Vol. 4, No. 3, 2007, pp. 293-300. doi:10.1002/ppap.200600148

[6]   N. Radek and K. Bartkowiak, “Performance Properties of Electro-Spark Deposited Carbide-Ceramic Coatings Modified by Laser Beam,” Physics Procedia, Vol. 5, 2010, pp. 417-423. doi:10.1016/j.phpro.2010.08.163

[7]   E. I. Zamulaeva, E. A. Levashov, A. E. Kudryashov, P. V. Vakaev and M. I. Petrzhik, “Electrospark Coatings Deposited onto an Armco Iron Substrate with Nano- and Microstructured WC-Co Electrodes: Deposition Process, Structure, and Properties,” Surface and Coatings Technology, Vol. 202, No. 15, 2008, pp. 3715-3722. doi:10.1016/j.surfcoat.2008.01.008

[8]   R. J. Wang, Y. Y. Qian and J. Liu, “Interface Behavior Study of WC92-Co8 Coating Produced by Electrospark Deposition,” Applied Surface Science, Vol. 240, No. 1-4, 2005, pp. 42-47. doi:10.1016/j.apsusc.2004.05.299

[9]   S. V. Nikolenko, A. D. Verkhoturov and M. I. Dvornik, “Use of Nanopowder Al2O3 as the Inhibitor of the Grain Growth in WC-8%Co Alloy,” Voprosju Materialovedenia, No. 2, 2008, p. 100. (in Russian)

[10]   P. Bague, J. P. Morizot and G. Desgardin, “Evidence for the Phenomenon of Carburization-Decarburization of Tungsten Carbide,” Journal of Physics D: Applied Physics, Vol. 27, No. 2, 1994, pp. 402-406. doi:10.1088/0022-3727/27/2/034

[11]   J. M. Guilemany, S. Dosta and J. R. Miguel, “The Enhancement of the Properties of WC-Co HVOF Coatings through the Use of Nanostructured and Microstructured Feedstock Powders,” Surface and Coatings Technology, Vol. 201, No. 3-4, 2006, pp. 1180-1190. doi:10.1016/j.surfcoat.2006.01.041

 
 
Top