Back
 ENG  Vol.5 No.3 , March 2013
"Integrated Design Process" a Concept for Green Energy Engineering
Abstract: Consulting Engineers and Architects are currently experimenting with the concept of “Integrated Design Process” (IDP). This paper views Integrated Design Process as a process tool and a concept for management and organization of the green energy engineering process. Moreover such a concept is understood both as systematic knowledge and a symbolic device for enabling change. The paper briefly review international variants, and focus on two variants present in Denmark: an architect and engineering variant of IDP. The differences between the concepts include different roles for main actors, the use of information technology, the relation to lean, and forms of collaboration. The paper discusses two building projects focusing on teams of engineers and architects in the early conceptual phase. One develops a solution focused on energy saving technologies, the other on energy producing. It is argued that in this practical context, IDP is viewed as ambiguous and not well defined, and the architects and engineer work hard understanding and using the concepts even when directly involved. It is difficult to reach consensus on how to do it. The various players agree that an increased interdisciplinary interaction in the design team is necessary in order to comply with the increased complexity of green energy building design. IDP shows potential as a driver for green energy engineering and technologies, as traditional roles and responsibilities in the design process is changed, and sustainable solutions for green buildings can reach a higher standard and quality and are integrated earlier in the design process.
Cite this paper: C. Koch and H. Buhl, ""Integrated Design Process" a Concept for Green Energy Engineering," Engineering, Vol. 5 No. 3, 2013, pp. 292-298. doi: 10.4236/eng.2013.53039.
References

[1]   Danish Commission on Climate Change Policy, “Green Energy—The Road to a Danish Energy System without Fossil Fuels,” Danish Commission on Climate, Copenhagen, 2010.

[2]   R. Pernick and C. Wilder, “The Clean Tech Revolution: Discover the Top Technologies and Companies to Watch,” Collins Business, New York, 2008.

[3]   R. Marsh, V. G. Larsen and M. Kragh, “Housing and energy in Denmark: Past, Present, and Future Challenges,” Building Research & Information, Vol. 38, No. 1, 2011, pp. 92-106. doi:10.1080/09613210903226608

[4]   T. S. Hojem and V. A. Lagesen, “Doing Environmental Concerns in Consulting Engineering,” Engineering Studies, Vol. 3, No. 2, 2011, pp. 123-143.

[5]   C. Brunsgaard, M.-A. Knudstrup and P. Heiselberg, “Experiences from the Design Processes of the First ‘Comfort Houses’ in Denmark,” Proceedings of the Nordic Conference on Passive House, Goteborg, 27-29 April 2009.

[6]   B. Czarniawska and G. Sevon, “Translating Organizational Change,” Walter de Gruyter, Berlin, 1996. doi:10.1515/9783110879735

[7]   C. Koch, P. H. Rasmussen and P. Vogelius, “New Management and Working Life—The Forced Marriage,” In: H. Hvid and P. Hasle, Eds., Human Development in Working Life, Ashgate, Aldershot, 2003, pp. 41-65.

[8]   K. Moe, “Integrated Design in Contemporary Architecture,” Princeton Architectural Press, New York, 2008.

[9]   A. Zimmerman, “Integrated Design Process Guide,” Canada Mortgage and Housing Corporation, Ottawa, 2006.

[10]   G. L?hnert, A. Dalkowski and W. Sutter, “Integrated Design Process. A Guideline for Sustainable and Solar-Optimised Building Design,” International Energy Agency (IEA), Berlin, 2003.

[11]   C. Brunsgaard, “Strengths and Weaknesses of Different Approaches of IDP,” Aalborg University, Aalborg, 2009, DCE Technical Report No. 74.

[12]   M. Keeler and B. Burke, “Fundamentals of Integrated Design for Sustainable Building,” Wiley, New York, 2009.

[13]   H. T. R. Hansen and M. Knudstrup, “The Integrated Design Process (IDP): A More Holistic Approach to Sustainable Architecture,” In: S. Murakami and T. Yashiro Eds., Action for Sustainability: The 2005 World Sustainable Building Conference, Tokyo National Conference Board, 2005, pp. 894-901.

[14]   S. Petersen and S. Svendsen, “Method for Component-Based Economical Optimisation for Use in Design of New Low-Energy Buildings,” Renewable Energy, Vol. 38, No. 1, 2012, pp. 173-180. doi:10.1016/j.renene.2011.07.019

[15]   S. Petersen and S. Svendsen, “Method and Simulation Program Informed Decisions in the Early Stages of Building Design,” Energy and Building, Vol. 42, No. 7, 2010, pp. 1113-1119. http://www.docstoc.com/docs/133983505/Petersen_-Svendsen---2010---Method-and-simulation-program-informed-decisions-in-the-early-stages-of-building-design doi:10.1016/j.enbuild.2010.02.002

[16]   E. L. Haubjerg, “Team Performance in Integrated Design Processes—How to Improve Team Performance in Integrated Design Processes in Construction Competitions,” Master Thesis, Institute of Business and Technology, Aarhus University, Aarhus, 2010.

[17]   European Commission, “Directive 2002/91/EC of the European Parliament and of the Council of 16 December 2002 on the Energy Performance of Buildings,” Official Journal of the European Communities, Vol. 1, 2003, pp. 65-70.

[18]   C. Koch, “The Tyranny of Projects—Teamworking, Organisational Knowledge and Project Management in Consulting Engineering,” Economic and Industrial Democracy, Vol. 25, No. 2, 2004, pp. 270-292.

[19]   CIB, “CIB White Paper on IDDS,” CIB Publication 328, 2009.

[20]   G. Gylling, M. Knudstrup, P. K. Heiselberg and E. K. Hansen, “Measuring Sustainable Homes—A Mixed Methods Approach,” Proceedings ARCC 2011—Considering Research: Reflecting upon Current Themes in Architectural Research, Architectural Research Centers Consortium, Detroit, 2011.

[21]   DGNB, “Deutsche Gesellschaft für Nachhaltiges Bauen,” DGNB, German Sustainable Building Council, 2013. http://www.dgnb.de

[22]   USGBC, “Leadership in Energy and Environmental Design,” United States Green Building Council (USGBC), 2013. http://new.usgbc.org/leed

 
 
Top