Back
 JSEMAT  Vol.3 No.1 A , February 2013
Assessment of the Erosive Wear Kinetics of Epoxy Coatings Modified with Nanofillers
Abstract: The paper presents results of investigation on the erosive wear kinetics of epoxy coatings modified with alumina or silica nanoparticles. Natural weathering caused a decrease of their erosive wear resistance. After a 3-year natural weathering, highest erosive wear resistance showed the epoxy coating modified with alumina nanoparticles.
Cite this paper: Kotnarowska, D. and Przerwa, M. (2013) Assessment of the Erosive Wear Kinetics of Epoxy Coatings Modified with Nanofillers. Journal of Surface Engineered Materials and Advanced Technology, 3, 89-93. doi: 10.4236/jsemat.2013.31A013.
References

[1]   D. Kotnarowska, “Influence of Ageing on Mechanical Properties of Epoxy Coatings,” Advances in Corrosion Protection by Organic Coatings, Cambridge, 1999, pp. 1-10.

[2]   D. Kotnarowska, “Influence of Ultraviolet Radiation on Erosive Resistance of Modified Epoxy Coatings,” Solid State Phenomena, Vol. 113, 2006, pp. 1045-1052. doi:10.4028/www.scientific.net/SSP.113.583

[3]   D. Kotnarowska, “Kinetics of Wear of Epoxide Coating Modified with Glass Microspheres,” Progress in Organic Coatings, Vol. 31, No. 4, 1997, pp. 325-330. doi:10.1016/S0300-9440(97)00090-8

[4]   D. Kotnarowska and M. Wojtyniak, “Influence of Ageing of Mechanical Properties of Epoxy Coatings,” Solid State Phenomena, Vol. 147-149, 2009, pp. 825-830. doi:10.4028/www.scientific.net/SSP.147-149.825

[5]   D. Kotnarowska, “Influence of Ultraviolet Radiation and Aggressive Media on Epoxy Coating Degradation,” Progress in Organic Coatings, Vol. 37, No. 3-4, 1999, pp. 149-159. doi:10.1016/S0300-9440(99)00070-3

[6]   C. Decker and M. Balandier, “Degradation of Poli(Vinyl Chloride) by U.V. Radiation—I. Kinetics and Quantum Yields,” European Polymer Journal, Vol. 18, No. 12, 1982, pp. 1085-1091. doi:10.1016/0014-3057(82)90209-9

[7]   C. Decker and S. Biry, “Light Stabilization of Polymers by Radiation-Cured Acrylic Coatings,” Progress in Organic Coatings, Vol. 29, No. 1-4, 1996, pp. 81-87. doi:0.1016/S0300-9440(96)00630-3

[8]   T. Nguyen, D. Bentz and E. Byrd, “Method for Measuring Water Diffusion in a Coating Applied to a Substrate,” Journal of Coating Technology, Vol. 67, No. 844, 1995, pp. 37-46.

[9]   D. Kotnarowska, “Epoxy Coating Destruction as a Result of Sulphuric Acid Aqueous Solution Action,” Progress in Organic Coatings, Vol. 67, No. 3, 2010, pp. 324-328. doi:10.1016/j.porgcoat.2009.10.026

[10]   T. Nguyen, J. B. Hubbard and J. M. Pommersheim, “Unified Model for the Degradation of Organic Coatings on Steel in a Neutral Electrolyte,” Journal of Coatings Technology, Vol. 68, No. 855, 1996, pp. 45-56.

[11]   D. Kotnarowska, “Influence of Mechanical Factors on Surface State of Acrylic Coatings with Nanofillers,” Materials Science, Vol. 14, No. 4, 2008, pp. 347-340.

[12]   P. A. Webb, “An Introduction to the Physical Characterization of Materials by Mercury Intrusion Porosimetry with Emphasis on Reduction and Presentation of Experimental Data,” Micromeritics Instrument Corparation, Norcross, 2001.

[13]   S. P. Rigby, R. S. Fletcher and S. N. Riley, “Characterization of Porous Solids Using Integrated Nitrogen Sorption and Mercury Porosimetry,” Chemical Engineering Science, Vol. 59, No. 1, 2004, pp. 41-51. doi:10.1016/j.ces.2003.09.017

[14]   T. Nguyen, D. Bentz and E. Byrd, “A Study of Water at the Organic Coating/Substrate Interface,” Journal of Coatings Technology, Vol. 66, No. 834, 1994, pp. 39-50.

[15]   M. Lonyuk, M. Bosma, A. C. Riemslag, J. Zuidema, A. Bakker and M. Janssen, “Stone-Impact Damage of Automotive Coatings: A Laboratory Single-Impact Tester,” Progress in Organic Coatings, Vol. 58, No. 2-3, 2007, pp. 241-247. doi:10.1016/j.porgcoat.2006.09.032

[16]   D. Kotnarowska, “Examination of Dynamics of Polymeric Coatings Erosive Wear Process,” Materials Science, Vol. 12, 2006, pp. 138-143.

[17]   D. Kotnarowska, Monograph No. 134, Radom Technical University, Radom, 2009, (in Polish).

 
 
Top