MME  Vol.3 No.1 , February 2013
Lever-Loading System Analysis and Application
Abstract: In order to prove the rationality of structural design and carrying capacity, reasonable design of lever-loading system to apply loadings to some loading-points was needed in spacecraft structural mechanics static test. Lever-loading system design affects the carrying capacity of test piece. This paper describes the application of different section loading beams. Optimizing and analysis the different models of loading beams, and verification the feasibility of combination beams.
Cite this paper: B. Liu, B. Zang and H. Quan, "Lever-Loading System Analysis and Application," Modern Mechanical Engineering, Vol. 3 No. 1, 2013, pp. 55-57. doi: 10.4236/mme.2013.31008.

[1]   Z. H. He, “Design of Preliminary Scheme on the Static Test of Fuselage Handing a New Object,” Northwestern Polytechnical University, Xi’an, 2007.

[2]   G. G. Yang, W. G. Jiang, W. W. Wang and X. Zhao, “The Application of Helicopter Static-Test Load-CoefficientMethod in Calculate of Add Weight of Lever,” The 25th National Annual Meeting of Helicopter, Jiangxi, August 2009, pp. 500-504. (in Chinese)

[3]   W. X. Gou, “Mechanics of Materials,” Science Press, Beijing, 2005.

[4]   J. G. Sun, “Analysis and Experiment of Folding Girders,” Mechanics in Engineering, Vol. 26, No. 4, 2004, pp. 7476.

[5]   G. H. Xu and B. P. Zhao, “Application of Uniform Designs in Aircraft Static Test,” Uniform Experimental Design Symposium, Beijing, August 2007, pp. 184-188. (in Chinese)

[6]   J. H. Lin, “The Stress Analysis and Experiment on Three Section Beams,” Henan Sciences, Vol. 27, No. 3, 2009, pp. 343-345.