Cite this paper
nullS. Desai, S. Kumar, P. Satyamurthy, J. Chakravartty and D. Chakravarthy, "Scaling Relationships for Input Energy in Electromagnetic Welding of Similar and Dissimilar Metals," Journal of Electromagnetic Analysis and Applications
, Vol. 2 No. 9, 2010, pp. 563-570. doi: 10.4236/jemaa.2010.29073
 S. Kumar, S. V. Desai, M. R. Kulkarni and D. P. Chakra-varthy, “Development of Electro-Magnetic Welding Technique for Similar and Dissimilar Metal Strips,” Na-tional Welding Seminar-2008, Mumbai.
S. Kumar, S. V. Desai, M. R. Kulkarni and D. P. Chakra-varthy, “Electro-Magnetic Welding of Copper to Stainless Steel,” National Welding Seminar-2009, Kolkata.
S. T. S. Al Hassani, J. L. Duncan and W. Johnson, “On the Parameters of the Magnetic Forming Process,” Journal of Mechanical Engineering Science, Vol. 16, No. 1, pp.1-9.
S. T. S. Al Hassani, J. L. Duncan and W. Johnson, “The Influence of the Electrical and Geometrical Parameters in Magnetic Forming,” Proceedings of the 8th International MTDR conference, Manchester, UK, September 1967.
K. Baines, J. L. Duncan and W. Johnson, “Electromagnetic Metal Forming,” Proceedings I. Mech. E, 180 (Pt. 1) 1965-6 4, 93.
S. T. S. Al Hassani, J. L. Duncan and W. Johnson, “Analysis of the Electromagnetic Forming Process,” Pro-ceedings of C.I.R.P., ASTME conference U.S.A., Sept. 1967.
G. K. Lal and M. J. Hillier, “The Electrodynamics of Electromagnetic Forming,” International Journal of Me-chanical Science, Vol. 10, No. 6, 1968, pp. 491-500.
G. K. Lal, “Electromagnetic Metal Forming,” IEEE transactions on Industrial applications, 1972, pp. 425-429.
K. Feas, T. Baaten, W. D. Waele and N. Debroux, “Join-ing of Copper to Brass Using Magnetic Pulse Welding,” 4th International conference on high speed forming, 2010, pp. 84-96.
V. Shribman, A. Stern, V. Livshitz and O. Gafri, “Mag-netic Pulse Welding Produces High Strength Aluminium Welds,” Welding Journal 81, 2002, pp 33-37.
B. Artzy, A. Stern, N. Frage and V. Shribman, “Interface Phenomena in Aluminium-Magnesium Magnetic Pulse Welding,” Science and technology of welding and joining, Vol. 13, No. 4, 2008, pp. 402-408.
S. V. Desai, S. Kumar, P. Satyamurthy, J. K. Chakravartty and D. P. Chakravarthy, “Analysis of the Effect of Colli-sion Velocity in Electromagnetic Welding Process of Aliminum Strips,” accepted for publication in International Journal of Electromagnetics and Mechanics in May 2010.
T. Aizawa, K. Okagawa, M. Yoshizawa and N. Henmi, “Impulse Magnetic Pressure Seam Welding of Aluminium Sheets,” Impact engineering and applications, 2001, pp. 827-832.
S. V. Desai, S. Kumar, P. Satyamurthy, J. K. Chakravartty and D. P. Chakravarthy, “Improvement of Performance of Electromagnetic Welding Process by Use of Driver Mate-rials,” accepted for publication in International Journal of Electromagnetics and Mechanics in 2010.
W. F. Brown, J. Bandas and N. T. Olsan, “Pulsed Mag-netic Welding of Fast Breeder Reactor Fuel Pin End Clo-sures,” Welding journal, Vol. 57, No. 6, 1978, pp. 22-26.