JSEMAT  Vol.3 No.1 , January 2013
Preparation and Characterization of Clay (Maghnite-H)/Poly(3,4-Ethylenedioxythiophene) Composites
ABSTRACT
Composites of Maghnite-H, a Montmorillonite sheet silicate clay, exchanged with protons, and Poly(3,4-ethylenedioxythiophene) (PEDOT) were prepared by in situ chemical polymerization of the 3,4-ethylenedioxythiophene, without the use of solvent or oxidant. The effect of changing monomer/clay ratio was studied and the resultant composite structures were characterized by Inferred spectroscopy, 27Al and 13CSolid-State NMR spectroscopy, scanning electron microscopy and powder X-ray diffraction. All analyses are consistent with a structure were the polymer is (partially) intercalated into the clay structure, which in favourable cases lead to exfoliation. The presence of the clay in the polymer leads to a desired increase in thermal stability as witnessed by thermogravimetry.

Cite this paper
A. Megherbi, R. Meghabar and M. Belbachir, "Preparation and Characterization of Clay (Maghnite-H)/Poly(3,4-Ethylenedioxythiophene) Composites," Journal of Surface Engineered Materials and Advanced Technology, Vol. 3 No. 1, 2013, pp. 21-27. doi: 10.4236/jsemat.2013.31004.
References
[1]   N. Hari-Singh, “Handbook of Organic Conductive Molecules and Polymers,” John Wiley & Sons Ltd., New York, 1997.

[2]   G. Tourrillan, “Polythiophene and Its Derivatives,” In: T. A. Skotheim, Ed., Handbook of Conducting Polymers, Marcel Dekker, New York, 1986, p. 293.

[3]   A. Kossmehl, “Semi-Conducting and Conducting Polymers with Aromatic and Heteroaromatic Units,” In: T. A. Skotheim, Ed., Handbook of Conducting Polymers, Marcel Dekker, New York, 1986, p. 351.

[4]   G. Schopf and G. Kossmehl, “Polythiophenes—Electrically Conducting Polymers,” Springer-Verlag, Berlin, 1997.

[5]   D. Kumar and R. C. Sharma, “Advances in Conductive Polymers,” European Polymer Journal, Vol. 34, No. 8, 1998, pp. 1053-1060. doi:10.1016/S0014-3057(97)00204-8

[6]   L. Groenendaal, F. Jonas, D. Freitag, H. Pielartzik and J. R. Reynolds, “Poly(3,4-Ethylenedioxythiophene) and Its Derivatives: Past, Present, and Future,” Advanced Materials, Vol. 12, No. 7, 2000, pp. 481-494. doi:10.1002/(SICI)1521-4095(200004)12:7<481::AID-ADMA481>3.0.CO;2-C

[7]   H. Yamato, M. Ohwa and W. Wernet, “Stability of Polypyrrole and Poly(3,4-Ethylenedioxythiophene) for Biosensor Application,” Journal of Electroanalytical Chemistry, Vol. 397, No. 1-2, 1995, pp.163-170.

[8]   I. Winter, C. Reese, J. Hormes, G. Heywang and F. Jonas, “The Thermal Ageing of Poly(3,4-Ethylenedioxythiophene). An Investigation by X-Ray Absorption and X-Ray Photoelectron Spectroscopy,” Chemical Physics, Vol. 194, No. 1, 1995, pp. 207-213. doi:10.1016/0301-0104(95)00026-K

[9]   C. Kvarnstrom, H. Neugebauer, S. Blomquiste, H. J. Ahomen, J. Kankare and A. Ivaska, “In Situ Spectro-Electrochemical Characterization of Poly (3, 4-Ethylene-dioxythiophene),” Electrochimica Acta, Vol. 44, No. 16, 1999, pp. 2739-2750. doi:10.1016/S0013-4686(98)00405-8

[10]   A. N. Aleshin, R. Hiebooms and A. J. Heeger, “Metallic Conductivity of Highly Doped Poly(3,4-Ethylenedioxy-thiophene),” Synthetic Metals, Vol. 101, No. 1-3, 1999, pp. 369-370. doi:10.1016/S0379-6779(98)00758-9

[11]   F. Jonas and L. Schrader, “Conductive Modifications of Polymers with Poly-Pyrroles and Polythiophenes,” Synthetic Metals, Vol. 41, No. 3, 1991, pp. 831-836.

[12]   F. Jonas and J. T. Morrisson, “3,4-Polyethylenedioxy Thiophene (PEDT): Conductive Coat-ings Technical Applications and Properties,” Synthetic Metals, Vol. 85, No. 1-3, 1997, pp. 1397-1398.

[13]   Q. Pei, G. Zucarello, M. Ahlskog and O. Ingan?s, “Electrochromic and Highly Stable Poly(3,4-Ethylenedioxy-thiophene) Switches between Opaque Blue-Black and Transparent Sky Blue,” Polymer, Vol. 35, No. 7, 1994, pp. 1347-1351. doi:10.1016/0032-3861(94)90332-8

[14]   A. Kumar, D. M. Welsh, M. C. Morvant, F. Piroux, K. A. Abboud and J. R. Reynolds, “Conducting Poly(3,4-Alky-lenedioxythiophene) Derivatives as Fast Electrochromics with High-Contrast Ratios,” Chemistry of Materials, Vol. 10, No. 3, 1998, pp. 896-902. doi:10.1021/cm9706614

[15]   J. C. Carlberg and O. Ingan?s, “Poly(3,4-Ethylenedioxy-thiophene) as Electrode Material in Electrochemical Capacitors,” Journal of the Electrochemical Society, Vol. 144, No. 4, 1997, L61-L64. doi:10.1149/1.1837553

[16]   N. Rozlosnik, “New Directions in Medical Biosensors Employing Poly(3,4-Ethylenedioxy Thiophene) Derivative-Based Electrodes,” Analytical and Bioanalytical Chemistry, Vol. 395, No. 3, 2009, pp. 637-645. doi:10.1007/s00216-009-2981-8

[17]   R. D. McCullough, P. C. Ewbank and R. S. Loewe, “Self-Assembly and Disassembly of Regioregular, Water Soluble Polythiophenes: Chemoselective Ionchromatic Sensing in Water,” Journal of the American Chemical Society, Vol. 119, No. 3, 1997, pp. 633-634. doi:10.1021/ja963713j

[18]   F. Le Floch, H. A. Ho, P. Harding-Lepage, M. Bedard, R. Neagu-Plesu and M. Leclerc, “Ferrocene-Functionalized Cationic Polythiophene for the Label-Free Electrochemical Detection of DNA,” Advanced Materials, Vol. 17, No. 10, 2005, pp. 1251-1254. doi:10.1002/adma.200401474

[19]   C. J. Brabec, N. S. Sariciftci and J. C. Hummelen, “Plastic Solar Cells,” Advanced Functional Materials, Vol. 11, No. 1, 2001, pp. 15-26. doi:10.1002/1616-3028(200102)11:1<15::AID-ADFM15>3.0.CO;2-A

[20]   K. M. Coakley and M. D. McGehee, “Conjugated Polymer Photovoltaic Cells,” Chemistry of Materials, Vol. 16, No. 23, 2004, pp. 4533-4542. doi:10.1021/cm049654n

[21]   L. Akcelrud, “Electroluminescent Polymers,” Progress in Polymer Science, Vol. 28, No. 6, 2003, pp. 875-962. doi:10.1016/S0079-6700(02)00140-5

[22]   I. F. Perepichka, D. F. Perepichka, H. Meng and F. Wudl, “Light-Emitting Polythiophenes,” Advanced Materials, Vol. 17, No. 19, 2005, pp. 2281-2305. doi:10.1002/adma.200500461

[23]   F. Jonas, W. Krafft and B. Muys, “Poly(3, 4-Ethylene-dioxythiophene): Conductive Coatings, Technical Applications and Properties,” Macromolecular Symposia, Vol. 100, No. 1, 1995, pp. 169-173. doi:10.1002/masy.19951000128

[24]   B. Sankaran and J. R. Reynolds, “High-Contrast Electrochromic Polymers from Alkyl-Derivatized Poly(3,4-Ethylenedioxy Thiophenes),” Macromolecules, Vol. 30, No. 9, 1997, pp. 2582-2588. doi:10.1021/ma961607w

[25]   W. C. Jeong, G. H. Moon, Y. Sook, G. O. Seong and S. I. Seung, “Poly(3,4-Ethylenedioxythiophene) Nanoparticles Prepared in Aqueous DBSA Solutions,” Synthetic Metals, Vol. 141, No. 3, 2004, pp. 293-299.

[26]   S. K. Lim, J. W. Kim, I. Chim, Y. K. Kwon and H. J. Choi, “Preparation and Interaction Characteristics of Organically Modified Montmorillonite Nanocomposite with Miscible Polymer Blend of Poly(Ethylene Oxide) and Poly(Methyl Methacrylate),” Chemistry of Materials, Vol. 14, No. 5, 2002, pp. 1989-1994. doi:10.1021/cm010498j

[27]   N. Boutaleb, A. Benyoucef, H-J. Salavagione, M. Belbachir and E. Morallón, “Electrochemical Behaviour of Conducting Polymers Obtained into Clay-Catalyst Layers. An in Situ Raman Spectroscopy Study,” European Polymer Journal, Vol. 42, No. 4, 2006, pp. 733-739. doi:10.1016/j.eurpolymj.2005.10.012

[28]   J. W. Kim, S. G. Kim, H. J. Choi, M. S. Suh, M. J. Shin and M. J. Jhon, “Synthesis and Electrorheological Characterization of Polyaniline and Na+-Montmorillonite Clay Nanocomposite,” International Journal of Modern Physics B, Vol. 15, No. 06n07, 2001, pp. 657-664.

[29]   J.W. Kim, F. Liw, H. J. Choi, S. H. Hong and J. Joo, “Intercalated Polypyrrole/Na+-Montmorillonite Nano-Composite via an Inverted Emulsion Pathway Method,” Polymer, Vol. 44, No. 1, 2003, pp. 289-293. doi:10.1016/S0032-3861(02)00749-8

[30]   M. Biswas and S. S. Ray, “Preparation and Evaluation of Composites from Mont-morillonite and Some Heterocyclic Polymers. 1: Poly(N-Vinylcarbazole)-Montmorillonite Nanocomposite System,” Polymer, Vol. 39, No. 25, 1998, pp. 6423-6428. doi:10.1016/S0032-3861(97)10366-4

[31]   S. S. Ray and M. Biswas, “Preparation and Evaluation of Composites from Montmorillonite and Some Heterocyclic Polymers: 3. a Water Dispersible Nanocomposite from Pyrrole-Montmorillonite Polymerization System,” Materials Research Bulletin, Vol. 34, No. 8, 1999, pp. 1187-1194.

[32]   L. Sadok, A. Pilar and R. H. Eduardo, “Influence of Iron in the Formation of Conductive Polypyrrole-Clay Nanocomposites,” Applied Clay Science, Vol. 28, No. 1-4, 2005, pp. 183-198.

[33]   N. Ballav and M. Biswas, “A Conducting Nanocomposite via Intercalative Polymerisation of Thiophene in Montmorillonite Clay,” Synthetic Metals, Vol. 142, No. 1-3, 2004, pp. 309-315. doi:10.1016/j.synthmet.2003.08.004

[34]   M. Belbachir and A. Bensaoula, “Composition and Method for Catalysis Using Bentonites,” US Patent: 7,094,823, 2006.

[35]   A. Harrane, R. Meghabar and M. Belbachir, “A Protons Exchanged Montmo-rillonite Clay as an Efficient Catalyst for the Reaction of Iso-butylene Polymerization,” International Journal of Molecular Science, Vol. 3, No. 7, 2002, pp. 790-800. doi:10.3390/i3070790

[36]   R. Meghabar, A. Megherbi and M. Belbachir, “Maghnite-H+, an Ecocatalyst for Cationic Polyme-rization of N-Vinyl- 2-Pyrrolidone,” Polymer, Vol. 44, No. 15, 2003, pp. 4097-4100. doi:10.1016/S0032-3861(03)00400-2

[37]   M. Chabani, A. Yahiaoui, A. Hachemaoui and M. Belbachir, “New Approach for the Polymerization of 2-Chloroethyl Vinyl Ether Using a Maghnite Clay as Eco-Catalyst,” Journal of Applied Polymer Science, Vol. 122, No. 3, 2011, pp. 1800-1806. doi:10.1002/app.34242

[38]   A.Yahioui, M. Belbachir and A. Hachmaoui, “An Acid Exchanged Montmorillonite Clay-Catalyzed Synthesis of Polyepichlorhydrin,” International Journal of Molecular Science, Vol. 4, No. 10, 2003, pp. 548-561. doi:10.3390/i4100548

[39]   A. Harrane, K. Oussadi, M. E. Belaoudj, R. Meghabar and M. Belbachir, “Cationic Ring Opening Polymerization of Glycolide Catalysed by a Mont-morillonite Clay Catalyst,” Journal of Polymer Research, Vol. 12, No. 5, 2005, pp. 361-365.

[40]   A. Harrane, R. Meghabar and M. Belbachir, “Polymerization of Epsilon-Caprolactone Using a Montmorillonite Clay as Catalyst,” Designed Monomers and Polymers, Vol. 8, No. 1, 2005, pp. 11-24. doi:10.1163/1568555053084203

[41]   A. Harrane, R. Meghabar and M. Belbachir, “In Situ Polymerization of -Caprolactone Catalysed by Maghnite-TOA to Produce Poly(-Caprolactone)/Montmorillonite Nanocomposites,” Designed Monomers and Polymers, Vol. 9, No. 2, 2006, pp. 181-191. doi:10.1163/156855506776382673

[42]   K. Oussadi, V. Montembault, M. Belbachir and L. Fontaine, “Ring-Opening Bulk Polymerization of Five- and Six-Membered Cyclic Phosphonates Using Maghnite, a Nontoxic Proton Exchanged Montmorillonite Clay,” Journal of Applied Polymer Science, Vol. 122, No. 2, 2011, pp. 891-897. doi:10.1002/app.34193

[43]   H. Meng, D. F. Perpichka and F. Wudl, “Facile Solid-State Synthesis of Highly Conducting Poly(Ethylenedi-oxythiophene),” Angewandte Chemie International Edition, Vol. 42, No. 6, 2003, pp. 658-661. doi:10.1002/anie.200390181

 
 
Top