Two Slot MIMO Configuration for Cooperative Sensor Network

Ibrahim  Mansour; Jamal S.  Rahhal; Hasan  Farahneh

doi:10.4236/ijcns.2010.39100

Ibrahim Mansour, Jamal S. Rahhal, Hasan Farahneh

Abstract: Sensor networks are used in various applications. Sensors acquire samples of physical data and send them to a destination node in different topologies. Multiple Input Multiple Output (MIMO) systems showed good utilization of channel characteristics. In MIMO Sensor Network, multiple signals are transmitted from the sensors and multiple sensors are used as receiving nodes. This provides each sensor multiple copies of the transmitted signal and hence, array processing techniques helps in reducing the effects of noise. In this paper we devise the use of MIMO sensor network and array decision techniques to reduce the noise effect. The proposed system uses a transmission time diversity to form the MIMO system. If the number of sensors is large then groups of sensors will form the MIMO system and benefited from the diversity to reduce the required transmitted power from each sensor. Enhancing the BER reduce the required transmitted power which results in longer battery life for sensor nodes. Simulation results showed an overall gain in SNR that reaches 11dB in some sensor network scenarios. This gain in SNR led to the opportunity of reducing the transmitted power by similar amount and hence, longer battery life is obtained.

Keywords: Wireless Sensor Networks (WSN), Cooperative Sensor Network (CSN), MIMO, Diversity

Cite this paper: nullI. Mansour, J. Rahhal and H. Farahneh, "Two Slot MIMO Configuration for Cooperative Sensor Network," International Journal of Communications, Network and System Sciences, Vol. 3 No. 9, 2010, pp. 750-754. doi: 10.4236/ijcns.2010.39100.

References

[1] J. Liang and Q. L. Liang, “Channel Selection in Virtual MIMO Wireless Sensor Networks,” IEEE Transactions on Vehicular Technology, Vol. 58, No. 5, June 2009, pp. 2249-2257.

[2] S. Cui and A. Goldsmith, “Energy-efficiency of MIMO and cooperative MIMO techniques in sensor networks,” IEEE Journals of Selective Areas Communications., Vol. 22, No. 6, pp. 1089-1098, August 2004.

[3] Elif Uysal-Biyikoglu and Abbas El Ga, “On Adaptive Transmission for Energy Efficiency in Wireless Data Networks,” IEEE Transactions on Information Theory, Vol. 50, No. 12, December 2004, pp. 3081-3094.

[4] S. Vishwanath, N. Jindal and A. Goldsmith, “Duality, Achievable Rates and Sum Capacity of Gaussian MIMO Broadcast Channels,” IEEE Transactions on Information Theory, Vol. 49, No. 10, August 2003, pp. 2658-2668.

[5] S. K. Jayaweera, “Virtual MIMO-based Cooperative Communication for Energy-constrained Wireless Sensor Networks,” IEEE Transactions on Wireless Communications, Vol. 5, No. 5, May 2006, pp. 984-989.

[6] Y. B. Li and X. G. Xia, “A Family of Distributed Space-Time Trellis Codes With Asynchronous Cooperative Diversity,” IEEE Transactions on Communications, Vol. 55, No. 4, April 2007, pp. 790-800.

[7] A. del Coso, U. Spagnolini and C. Ibars, “Cooperative Distributed MIMO Channels in Wireless Sensor Networks,” IEEE Journals of Selective Areas Communications, Vol. 25, No. 2, February 2007, pp. 402-414.

[8] Y. Yuan, Z. He, and M. Chen, “Virtual MIMO-based Cross-layer Design for Wireless Sensor Networks,” IEEE Transactions on Vehicular Technology, Vol. 55, No. 3, May 2006, pp. 856-864.

[9] G. Thatte and U. Mitra, “Sensor Selection and Power Allocation for Distributed Estimation in Sensor Networks: Beyond the Star Topology,” IEEE Transactions on Signal Processing, Vol. 56, No. 7, July 2008, pp. 2649-2661.

[10] S. Valentin, et. al, “CooperativeWireless Networking Beyond Store-and-Forward: Perspectives in PHY and MAC design,” Wireless Personal Communications Vol. 48, 2009, pp. 49-68.

[11] A. B. Gershman and N. D. Sidiropoulos (Eds). “Space- Time Processing for MIMO Communications,” John Wiley & Sons, New Jersey, 2005.