E. F. Strobel, N. A. Mariano, K. Strobel and M. F. Dionízio, “Effect of the Heat Treatment in the Resistance Corrosion of a Martinsitic Stainless Steel CA6NM,” 2nd Edition, Mercosur Congress on Chemical Engineering, 2012. http://www.enpromer2005.eq.ufrj.br/lng/en/index.php
 J. G. Gonzalez-Rodriguez, G. Bahena-Martinez and V. M. Salinas-Bravo, “Effect of Heat Treatment on the Stress Corrosion Cracking Behaviour of 403 Stainless Steel in NaCl at 95?C,” Materials Letters, Vol. 43, No. 4, 2000, pp. 208-214. doi:10.1016/S0167-577X(99)00261-X
 A. N. Isfahany, H. Saghafian and G. Borhani, “The Effect of Heat Treatment on Mechanical Properties and Corrosion Behaviour of AISI420 Martensitic Stainless Steel,” Journal of Alloys and Compounds, Vol. 509, No. 9, 2011, pp. 3931-3936. doi:10.1016/j.jallcom.2010.12.174
 J. Xie, A. T. Alpas and D. O. Northwood, “The Role of Heat Treatment on the Erosion—Corrosion Behaviour of AISI 52100 Steel,” Materials Science and Engineering: A, Vol. 393, No. 1-2, 2005, pp. 42-50. doi:10.1016/j.msea.2004.09.045
 O. V. Akgün, M. ürgen and A. F. ?akir, “The Effect of Heat Treatment on Corrosion Behaviour of Laser Surface Melted 304L Stainless Steel,” Materials Science and Engineering: A, Vol. 203, No. 1-2, 1995, pp. 324-331. doi:10.1016/0921-5093(95)09807-0
 J. Park and Y. Park, “The Effects of Heat-Treatment Parameters on Corrosion Resistance and Phase Transformations of 14Cr-3Mo Martensitic Stainless Steel,” Materials Science and Engineering: A, Vol. 449-451, 2007, pp. 1131-1134. doi:10.1016/j.msea.2006.03.134
 A. A. Khadom, A. S. Yaro, A. S. AlTaie and A. A. H. Kadum, “Electrochemical, Activation and Adsorption for the Corrosion Inhibition of Low Carbon Steel in Acidic Media,” Portugaliae Electrochimica Acta, Vol. 27, No. 6, 2009, pp. 699-712. doi:10.4152/pea.200906699
 L. Herrag, B. Hammouti, S. Elkadiri, A. Aouniti, C. Jama, H. Vezin and F. Bentiss, “Adsorption Properties and Inhibition of Mild Steel Corrosion in Hydrochloric Solution by Some Newly Synthesized Diamine Derivatives,” Experimental and Theoretical Investigations, Corrosion Science, Vol. 52, No. 9, 2010, pp.3042-3051. doi:10.1016/j.corsci.2010.05.024
 D. Jayaperumal, “Effects of Alcohol-Based Inhibitors on Corrosion of Mild Steel in Hydrochloric Acid,” Materials Chemistry and Physics, Vol. 119, No. 3, 2010, pp. 478-84.
 J. Aljourani, M. A. Golozar and K. Raeissi, “The Inhibition of Carbon Steel Corrosion in Hydrochloric and Sulfuric Acid Media Using Some Benzimidazole Derivaives,” Materials Chemistry and Physics, Vol. 121, No. 1-2, 2010, pp. 320-325. doi:10.1016/j.matchemphys.2010.01.040
 A. K. Singh and M. A. Quraishi, “Investigation of the Effect of Disulfiram on Corrosion of Mild Steel in Hydrochloric Acid Solution,” Corrosion Science, Vol. 53, No. 4, 2010, pp. 1288-1297. doi:10.1016/j.corsci.2011.01.002
 N. A. Negm, Y. M. Elkholy, M. K. Zahran and S. M. Tawfik, “Corrosion Inhibition Efficiency and Surface Activity of Benzothiazol-3-Ium Cationic Schiff Base Derivatives in Hydrochloric Acid,” Corrosion Science, Vol. 52, No. 10, 2010, pp. 3523-3536. doi:10.1016/j.corsci.2010.07.001
 A. K. Singh and M. A. Quraishi, “Investigation of Adsorption of Isoniazid Derivatives at Mild Steel/Hydrochloric Acid Interface: Electrochemical and Weight Loss Methods,” Materials Chemistry and Physics, Vol. 123, No. 2-3, 2010, pp. 666-677. doi:10.1016/j.matchemphys.2010.05.035
 F. M. F. Al-Quran and H. I. Al-Itawi, “Effects of the Heat Treatment on Corrosion Resistance and Microhardness of Alloy Steel,” European Journal of Scientific Research, Vol. 39, No. 2, 2010, pp. 251-256.
 A. Chiejina, “Revamping the Fortunes of Delta Steel Company (DSC),” 2011.
 NSE (Nigerian Society of Engineers), “Professional Development Board Codes and Ethics Committee,” A Report on Workshop on Evaluation of Engineering Standards, Nigeria, 17-18 October 2001, pp. 1-32.
 S. O. Jakayinfa, J. O. Ojediran and P. O. Okekunle, “An Evaluation of Corrosion Prevention Practices in Agricultural Equipment Manufacture and Used in Nigeria,” Anti-Corrosion Materials, Vol. 54, No. 5, 2003, pp. 346-370.
 D. A. Fadare, T. G. Fadara and O. Y. Akanbi, “Effect of Heat Treatment on Mechanical Properties and Microstructure of NST 37-2 Steel,” Journal of Minerals and Materials Characterization and Engineering, Vol. 10, No. 3, 2011, pp. 299-308.
 B. O. Malomo, S. A. Ibitoye and L. O. Adekoya, “The Analysis of the Fatigue Behaviour of NST 37-2 Steel Based on the Probabilistic Stress-Life (P-S-N) Relationships,” Proceedings of the Faculty of Technology International Conference, Obafemi Awolowo University, Ile-Ife, 25-29 September 2011, pp. 164-174.
 D. A. Fadare and T. B. Asafa, “Optimization of Turning NST 37-2 Steel with Uncoated Carbide Cutting Tools,” Journal of the Nigerian Institution of Mechanical Engineers, Vol. 2, No. 1, 2010, pp. 31-40.
 D. A. Fadare and T. B. Asafa, “Performance Evaluation of Uncoated Carbide Cutting Tools in Turning NST 37-2 Steel,” Proceedings of 22nd International Conference of the NIMechE, Osogbo, 20-22 October 2009, pp. 20-24.
 O. O. Oluwole, P. O. Atanda, O. A. Odekunbi and E. Odegbaju, “Corrosion Behavior of 18/8 Stain-Less Steel and Nickel-plated Low Carbon Steel in Cassava Fluid,” Journal of Minerals & Materials Characterization & Engineering, Vol. 8, No. 10, 2009, pp. 803-811.
 M. Mobin and H. Shabnam, “Corrosion Behavior of Mild Steel and SS 304L in Presence of Dissolved Copper,” Journal of Minerals & Materials Characterization & Engineering, Vol. 9, No. 12, 2010, pp.1113-1130.
 O. Kelestemur and S. Yildiz, “Effect of Various Dual-Phase Heat Treatments on the Corrosion Behaviour of Reinforcing Steel Used in the Reinforced Concrete Structures,” Construction and Building Materials, Vol. 23, No. 1, 2009, pp. 78-84. doi:10.1016/j.conbuildmat.2008.02.001
 M. A. Lucio-Garcia, J. G. Gonzalez-Rodriguez, M. Casales, L. Martinez, J. G. Chacon-Nava, M. A. Neri-Flores and A. Martinez-Villafañe, “Effect of Heat Treatment on H2S Corrosion of a Mcro-alloyed C-Mn Steel,” Corrosion Science, Vol. 51, No. 10, 2009, pp. 2380-2386. doi:10.1016/j.corsci.2009.06.022