IJG  Vol.4 No.1 , January 2013
Calculation of Constitutive Parameters from Electric and Magnetic Field Measurements in an Anisotropic Medium with a Triaxial Instrument
Abstract: A hypothetical electric and magnetic induction tensor is considered in an anisotropic medium. The sources are magnetic dipoles. In such a medium, constitute parameters can be calculated by combining electric and magnetic field measurements. Constitutive parameters are not a scalar in this case. They are tensors, so parameters have at least both horizontal and vertical components in a uniaxial medium. These calculated parameters from the field measurement are horizontal and vertical conductivity, permittivity, and magnetic permeability. Operating frequency range is also quite large. It is up to 4 GHz. A hypothetical instrument should measure gradient fields both electric and magnetic types as well.
Cite this paper: E. Pekşen, "Calculation of Constitutive Parameters from Electric and Magnetic Field Measurements in an Anisotropic Medium with a Triaxial Instrument," International Journal of Geosciences, Vol. 4 No. 1, 2013, pp. 58-68. doi: 10.4236/ijg.2013.41007.

[1]   C. A. Balanis, “Advanced Engineering Electromagnetics,” John Wiley & Sons, Inc., Hoboken, 1989.

[2]   R. S. Carmichael, “Practical Handbook of Physical Properties of Rocks and Minerals,” CRC, Boca Raton, 1989.

[3]   F. S. Grant and G. F. West, “Interpretation Theory in Applied Geophysics,” McGraw-Hill Book Company, New York, 1965.

[4]   M. N. Nabighian, Ed., “Electromagnetic Methods in Ap plied Geophysics V. I: Theory,” SAGE publication, Thou sand Oaks, 1987.

[5]   M. S. Zhdanov and G. V. Keller, “The Geoelectrical Methods in Geophysical Exploration,” Elsevier, Amsterdam, 1994.

[6]   J. D. Klein, P. R. Martin and D. F. Allen, “The Petro physics of Electrically Anisotropic Reservoirs,” SPWLA 36th Annual Logging Symposium, Paris, 26-29 June 1995, Paper HH.

[7]   M. S. Zhdanov, D. Kennedy and E. Peksen, “Foundations of Tensor Induction Well-Logging,” Petrophysics, Vol. 42, No. 6, 2001, pp. 588-610.

[8]   Z. Zhang, L. Yu, B. Kriegshauser and L. Tabarovsky, “Determination of Relative Angles and Anisotropic Resistivity Using Multicomponent Induction Logging Data,” Geophysics, Vol. 69, No. 4, 2004, pp. 898-908. doi:10.1190/1.1778233

[9]   B. I. Anderson, T. D. Barber and M. G. Lulling, “The Response of Induction Tools to Dipping Anisotropic Formations,” SPWLA 36th Annual Logging Symposium, Paris, 26-29 June 1995, Paper D.

[10]   M. G. Lüling, R. Rosthal and F. Shray, “Processing and Modeling 2 MHz Tools in Dipping, Laminated Anisotropic Formations,” SPWLA 35th Annual Logging Symposium, Tulsa, 19-22 June 1994, Paper QQ.

[11]   J. H. Moran and S. C. Gianzero, “Effects of Formation Anisotropy on Resistivity Logging Measurements,” Geo physics, Vol. 44, No. 7, 1979, pp. 1266-1286. doi:10.1190/1.1441006

[12]   L. Zhong, C. L. Shen, R. Liu, M. Bittar and G. Hu, “Simulation of Tri-Axial Induction Logging Tools in Layered Anisotropic Dipping Formations,” 76th Annual International Meeting SEG, New Orleans, 2006, pp. 456 460.

[13]   L. L. Zhong, J. Li, L. C. Shen and R. C. Liu, “Computation of Triaxial Induction Logging Tools in Layered Anisotropic Dipping Formations,” IEEE Transactions on Geo science and Remote Sensing, Vol. 46, No. 4, 2008, pp. 1148-1163. doi:10.1109/TGRS.2008.915749.

[14]   S. Gianzero, D. Kennedy, L. Gao and L. San Martin, “The Response of a Triaxial Sonde in a Biaxial Anisotropic Medium,” Petrophysics, Vol. 43, No. 3, 2002, pp. 172 184.

[15]   A. G. Nekut, “Anisotropy Induction Logging,” Geophysics, Vol. 59, No. 3, 1994, pp. 345-350. doi:10.1190/1.1443596

[16]   N. Yuan, X. C. Nie, R. Liu and C. W. Qiu, “Simulation of Full Responses of a Triaxial Induction Tool in a Homogeneous Biaxial Anisotropic Formation,” Geophysics, Vol. 75, No. 2, 2010, pp. E101-E114. doi:10.1190/1.3336959

[17]   A. Gribenko and M. S. Zhdanov, “Rigorous 3D Inversion of Tensor Electrical and Magnetic Induction Well Logging Data Inhomogeneous Media,” 79th Annual International Meeting SEG, Houston, 2009, pp. 431-435.

[18]   M. S. Zhdanov, “Method and Apparatus for Gradient Electromagnetic Induction Well Logging,” PCT WO 2005/ 083467 A1. 2005.

[19]   X. Lu, D. L. Alumbaugh and C. J. Weiss, “The Electric Fields and Currents Produced by Induction Logging In struments in Anisotropic Media,” Geophysics, Vol. 67, No. 2, 2002, pp. 478-483. doi:10.1190/1.1468607

[20]   E. Peksen, “Methods for Interpretation of Tensor Induction Well Logging in Layered Anisotropic Formations,” Ph.D. Thesis, University of Utah, Salt Lake City, 2004.

[21]   T. Wang, “The Electromagnetic Smoke Ring in a Transversely Isotropic Medium,” Geophysics, Vol. 67, No. 6, 2002, pp. 1779-1789.

[22]   M. Rabinovich, L. Tabarovsky, B. Corley, L. van der Horst and M. Epov, “Processing Multi-Component Induction Data for Formation Dips and Anisotropy,” Petrophysics, Vol. 47, No. 6, 2006, pp. 506-526. doi:10.1190/1.1527078