AMPC  Vol.2 No.4 , December 2012
Catalytic Feedstock Recycling of Polymers
ABSTRACT
This piece of study involves degradation of plastic waste in presence of two different catalysts. It was found in gas chromatography (GC) analysis results that in presence of these catalysts more than 80% of polymer by weight was converted into either liquid or gaseous hydrocarbons. These can be utilized as fuel or can be transformed into other useful products. Thermo gravimetric analysis (TGA) and differential scanning calorimetric (DSC) analysis of polymers suggest that presence of these catalysts lowers degradation temperature and change mechanism of degradation.



Cite this paper
R. Francis and B. Sethi, "Catalytic Feedstock Recycling of Polymers," Advances in Materials Physics and Chemistry, Vol. 2 No. 4, 2012, pp. 263-266. doi: 10.4236/ampc.2012.24B067.
References
[1]   K. C Kirkwood, S. A Leng, and David, “Stem cracking of unconventional hydrocarbon feedstocks for production of petrochemicals”. Proceedings of 45th International Petroleum Conference June 13, 2011, Bratislava, Slovak Republic.

[2]   J. Walenzievski, “Continuous flow cracking of waste plastics”. Fuel Process. Technol. vol. 86, pp. 1265- 1272, 2005.

[3]   W. Kaminsky, and F. Hartman, “Simulation and experiments of polyethene pyrolysis in a Fuildized Bed Process”. Proceedings of III International Symphosium of Feedstock Recycling of Plastics and other Innovative Recycling Techniques. Karlsruhe, Germany, Sept 25-29, (2000). pp 201.

[4]   M. Predel, and W. Kaminsky, “Feedstock recycling of polymers by pyrolysis in a fluidised bed”. Polymer. Degradation Stabil. vol.70, pp. 373-378, (2000).

[5]   P. T. Williams, and E. A. Williams, “Pyrolysis of post consumed waste plastics for the recovery of btx-aromatics using a fluidized bed reactor”. J. Anal. Appl. Pyrolysis, vol. 51, pp. 107-112, 1999.

[6]   W. Kaminsky, and H. Sinn, “Recycling and Recovery of Plastics, Hanser, New York” . Proceedings of III International Symphosium of Feedstock Recycling of Plastics and other Innovative Recycling Techniques. Karlsruhe, Germany, Sept 25-29, pp 435-442. 2005.

[7]   J. Aguado, and D. P. Serrano,“European trends in the feedstock recycling of plastic”. Global NEST Journal, vol. 9(1), pp 12-19, 2007

[8]   P. Connet, “Muncipal waste incineration: A poor solution for twenty first century”. Journal of the Air & Waste Management Association, vol. 56, pp. 709-742, 2006.

[9]   J. Aguado, and D. P. Serrano, “Feedstock Recycling of Plastic Wastes”. Cambridge: Royal Society of Chemistry. 1999.

[10]   D. P. Serrano, J. Aguado, G. Vicente, N. Sanchez, and L. Estebon, “Enhanced Production of ?-Olefins by thermal degradation of HDPE in De Calin Solvent”. 2000.

[11]   S. Suga, Y. Wakayama, and T. Funazukuri, “Hydro-thermal dechlorination of Poly (vinylchloride) in the absence and the presence of hydrogen peroxide”. Polym, Degrad, Stab. vol. 67, pp. 285 -298, 2000.

[12]   R. Maraghi, Disposal, recycling and reuse. In Mosta Fa N.; Dekker, M. Editors, Plastic Waste Management. New York, USA; pp 223-226. 1993.

[13]   I. Mita, Effect of structure on degradation and stability of polymers. In Aspect of Degradation and Stabilization of Polymers (ed. Jellinek, H. H. G.) 1978, Ch. 6, 247–294 (Elsevier, Amsterdam).

[14]   J. Leonard, Heats and entropies of polymerization, ceiling temperatures, equilibrium monomer concentrations, and polymerizability of heterocyclic compounds. In Polymer Handbook Fourth Edition (eds, Brandrup, J., Immergut, E. H., & Grulke, E. A.) Ch. II, 363–414 (Wiley Interscience, New York, 1999).

[15]   S. Kumar, A. K. Panda, and R. K. Singh. “A review on tertiary recycling of high- density Poly ethylene to fuel”. Conservation and Recycling, vol. 55, pp. 893-910, 2011.

[16]   Uemichi, Y. Makino, and T. Kanazuka, “Degradation of polypropylene to aromatic hydrocarbons over Pt- and Fe-containing activated carbon catalysts”. J. Anal. Appl. Pyrol. vol.16, pp. 229-232, 1989.

 
 
Top