ABSTRACT Thin layers of nickel and copper tetrasulfonated phthalocyanines (NiPcTS and CuPcTS) were prepared by Matrix Assisted Pulsed Laser Evaporation method. The depositions were carried out with KrF excimer laser (energy density of laser radiation EL = 0.1 to 0.5 J.cm-2) from dimethylsulfoxide matrix. For both materials the ablation threshold EL-th was determined. The following properties of deposited layers were characterized: a) chemical composition (FTIR spectra); b) morphology (SEM and AFM portraits); c) impedance of gas sensors based on NiPcTS and CuPcTS layers in the presence of two analytes - hydrogen and ozone. The prepared sensors exhibit response to 1000 ppm of hydrogen and 100 ppb of ozone even at laboratory temperature.
Cite this paper
P. Fitl, M. Vrnata, D. Kopecky, J. Vlcek, J. Skodova, J. Hofmann and V. Myslik, "Laser Deposition of Tetrasulfonated Phthalocyanine Layers for Gas Sensors," Advances in Materials Physics and Chemistry, Vol. 2 No. 4, 2012, pp. 84-88. doi: 10.4236/ampc.2012.24B023.
 A. Piqué, R.A. McGill and D.B.Chrisey, “Growth of organic thin films by the matrix assisted pulsed laser evaporation (MAPLE) technique,” Thin Solid Films, vols. 355-356, pp. 536-541, 1999.
 D.B. Chrisey, A. Piqué and R.A. McGill, “Laser deposition of polymer and biomaterial films,” Chem. Rev., vol. 103, pp. 553-576, 2003.
 W. Goppel and K. D. Schierbaum, “SnO2 sensors: current status and future prospects,” Sens. Actuators B, vol. 26/27, pp. 1–12, 1995.
 S. Carquigny, “Ammonia gas sensor based on electrosynthesized polypyrrole films,” Talanta, vol. 78, pp. 199-206, 2009.
 D. Delmare and C. Bied-Charreton, “Grafting of cobalt porphyrins in sol-gel matrices:application to the detection of amines,” Sens.Actuators B, vol. 62, pp.136-142, 2000.
 S. Nespurek, “Soluble phthalocyanines: Perspective materials for electronics,” Mol. Liq. Cryst., vol. 468, pp. 355-373, 2007.
 Y.Q. Chen, W.M. Zhang and G.A. Li, “Saw gas sensor with copper tetrasulfonated phthalocyanine film,” Sens. Actuators B, vol. 20, pp. 247-249, 1994.
 R. Frycek, F.Vyslou?il, V. Myslík, M.Vrňata, D. Kopecky, O. Ekrt, P. Fitl, M.Jelínek, T. Kocourek and R. Sipula, “Deposition of organic metalocomplexes for sensor applications by MAPLE,” Sens. Actuators B, vol. 125, pp. 189-1949, 2007.
 V. Myslík, F.Vyslouzil, M. Vrňata, Z. Rozehnal, M. Jelínek, R. Frycek and M. Kovanda, “Phase ac-sensitivity of oxidic and acetylacetonic gas sensors,” Sens. Actuators B, vol. 89, pp. 205-211, 2003.
 P. Fitl, V. Myslík, M. Vrňata, J. Náhlík, D. Kopecky, J. Vl?ek, J. Hofmann, J. Lancok, “Sensing properties of tin acetylacetonate-based thin films doped with platinum,” Sens. Mater., vol.24, pp. 75-86, 2012.
 M. Fukui, “Structural characterization of phthalocyanine Langmuir-Blodgett multilayer assemblies by ft-ir spectroscopy,” Chem. Phys. Lett., vol. 177, pp. 247-251, 1991.