Back
 ENG  Vol.5 No.1 , January 2013
Analyzing Some Behavior of a Beam with Different Crack Positions Transversely inside It
Abstract: Vertical displacement, critical Euler buckling load and vibration behavior of a cracked beam are considered in this research. The crack inside the beam is placed in different positions and results compared for each crack position. On first Eigenvalue of free vibration results, there is a border that first Eigenvalue of free vibration does not change if center of crack is located on that border, and after that border, the first Eigenvalue of free vibration is increased that is a counterexample relation of critical Euler buckling load and first Eigenvalue of free vibration.
Cite this paper: B. Yazdizadeh, "Analyzing Some Behavior of a Beam with Different Crack Positions Transversely inside It," Engineering, Vol. 5 No. 1, 2013, pp. 56-60. doi: 10.4236/eng.2013.51009.
References

[1]   C. E. Inglis, “Stresses in a Plate Due to the Presence of Cracks and Sharp Corners,” SPIE Milestone Series, Vol. 137, 1913, pp. 3-17.

[2]   A. Caballero and A. Dyskin, “Mesh Scalability in Direct Finite Element Simulation of Brittle Fracture,” Engineering Fracture Mechanics, Vol. 75, No. 14, 2008, pp. 40664084. doi:10.1016/j.engfracmech.2008.03.007

[3]   F. Erdogan, “Stress Intensity Factors,” Journal of Applied Mechanics, Vol. 50, No. 4b, 1983, pp. 992-1002. doi:10.1115/1.3167212

[4]   H. Liebowitz and G. C. Sih, “Mathematical Theories of Brittle Fracture,” Academic Press, Waltham, 1968.

[5]   M. P. Savruk, “Two-Dimensional Elasticity Problems for Bodies with Cracks,” Savruk, Kiev, 1981.

[6]   I. N. Sneddon and M. Lowengrub, “Crack Problems in the Classical Theory of Elasticity,” Wiley, Hoboken, 1969.

[7]   M. Cervera and M. Chiumenti, “Mesh Objective Tensile Cracking via a Local Continuum Damage Model and a Crack Tracking Technique,” Computer Methods in Applied Mechanics and Engineering, Vol. 196, No. 1-3, 2006, pp. 304-320. doi:10.1016/j.cma.2006.04.008

[8]   K. K. Gupta and J. L. Meek, “A Brief History of the Beginning of the Finite Element Method,” International Journal for Numerical Methods in Engineering, Vol. 39, No. 22, 1996, pp 3761-3774. doi:10.1002/(SICI)1097-0207(19961130)39:22<3761::AID-NME22>3.3.CO;2-X

[9]   S. S. Rao, “The Finite Element Method in Engineering,” 4th Edition, Butterworth-Heinemann, Oxford, 2011.

[10]   M. Cervera, “An Orthotropic Mesh Corrected Crack Model,” Computer Methods in Applied Mechanics and Engineering, Vol. 197, No. 17-18, 2008, pp. 1603-1619. doi:10.1016/j.cma.2007.12.007

[11]   L. Euler, “On the Strength of Columns,” American Journal of Physics, Vol. 15, No. 4, 1947, p. 315. doi:10.1119/1.1990953

[12]   P. Bhatt and W. T. Marshall, “Structures,” 4th Edition, Longman, Harlow, 1999.

[13]   B. Yazdizadeh, “Analyzing Some Behavior of a Cracked Beam under Pressure,” International Journal of Science and Technology, Vol. 2, No. 9, 2012, pp. 681-688.

[14]   E. P. Popov and T. A. Balan, “Engineering Mechanics of Solids,” 2nd Edition, Prentice-Hall, Upper Saddle River, 1998.

[15]   S. Timoshenko, “Vibration Problems in Engineering,” 4th Edition, Wolfenden Press, New York, 1974.

 
 
Top