OJFD  Vol.2 No.4 A , December 2012
Spray Atomization and Structure of Supersonic Liquid Jet with Various Viscosities of Non-Newtonian Fluids
ABSTRACT
These experimental investigations are designed to study shock wave characteristics and spray structure. Supersonic liq- uid jets injected into ambient fields are empirically studied using projectile impacts in a two-stage light gas gun. This study looks primarily at the design of the nozzle assembly, the tip velocity of the high speed jet, the structure of the spray jet and the shock wave generation process. The supersonic liquid jets were visualized using an ultra high-speed camera and the schlieren system for visualization to quantitatively analyze the shock wave angle. The experimental re- sults with straight cone nozzle types and various non-Newtonian fluid viscosities are presented in this paper. The effects of nozzle geometry on the jet behavior are described. The characteristics of the shock wave generation and spray jet structure were found to be significantly related to the nozzle geometry. The expansion gases accelerated the projectile, which had a mass of 6 grams, from 250 m/s. As a result, it was found that the maximum jet velocity appeared in the liquid jet with high viscosity properties. Supersonic liquid jets, which occurred at the leading edge the shock waves and the compression waves in front of the jets, were observed. Also, the shock waves significantly affected the atomization process for each spray droplet.

Cite this paper
J. Shin, I. Lee, H. Kim and J. Koo, "Spray Atomization and Structure of Supersonic Liquid Jet with Various Viscosities of Non-Newtonian Fluids," Open Journal of Fluid Dynamics, Vol. 2 No. 4, 2012, pp. 297-304. doi: 10.4236/ojfd.2012.24A036.
References
[1]   D. C. Jenkens, “Erosion of Surfaces by Liquid Drops,” Nature, Vol. 176, 1955, pp. 303-304. doi:10.1038/176303a0

[2]   W. C. Cooley, “Survey of Water Jet Coal Mining Technology,” Third International Symposium on Jet Cutting Technology, Chicago, 1976, pp. D1-1.

[3]   T. J. Labus, “Cutting and Drilling of Composites Using High Pressure Water Jets,” Fourth International Symposium on Jet Cutting Technology, Canterbury, 12-14 April 1978, pp. G2-9.

[4]   S. Kook and L. M. Pickett, “Effect of Ambient Temperature and Density on Shock Wave Generation in a Diesel Engine,” Atomization and Sprays, Vol. 20, No. 2, 2010, pp. 163-175. doi:10.1615/AtomizSpr.v20.i2.50

[5]   H. Akiyama, H. Nishimura, Y. Ibaraki and N. Iida, “Study of Diesel Spray Combustion and Ignition Using High-Pressure Fuel Injection and a Micro-Hole Nozzle with a Rapid Compression Machine: Improvement of Combustion Using Low Cetane Number Fuel,” JSAE Review, Vol. 19, No. 4, 1998, pp. 319-327. doi:10.1016/S0389-4304(98)00024-1

[6]   H.-H. Shi and K. Takayama, “Generation of Hypersonic Liquid Fuel Jets Accompanying Self-Combustion,” Shock Waves, Vol. 9, No. 5, 1999, pp. 327-332. doi:10.1007/s001930050193

[7]   K. Pianthong, K. Takayama, B. E. Milton and M. Behnia, “Multiple Pulsed Hypersonic Liquid Diesel Fuel Jets Driven by Projectile Impact,” Shock Waves, Vol. 14, No. 1-2, 2005, pp. 73-82. doi:10.1007/s00193-004-0237-2

[8]   J. E. Field and M. B. Lesser, “On the Mechanics of High Speed Liquid Jets,” Proceedings of the Royal Society London, A Series, Vol. 357, No. 1689, 1977, pp. 143-162.

[9]   H. Hiroyasu, “Fundamental Spray Combustion Mechanism and Structures of Fuel Spray in Diesel Engines,” IUTAM Symposium on Mechanics and Combustion of Droplets and Sprays, Tainan, 6-10 December 1994, pp. 291-306.

[10]   T. Nakahira, M. Komori, M. Nishida and K. Tsujimura, “The Shock Wave Generation around the Diesel Fuel Spray with High Pressure Injection,” International Congress & Exposition, Detroit, 24 February 1992, pp. 19-24. doi:10.4271/920460

[11]   K. Pianthong, “Supersonic Liquid Diesel Fuel Jets; Generation, Shock Wave Characteristics, Auto-Ignition Feasibilities,” Ph.D. Thesis, New South Wales University, Sydney, Australia, 2002.

[12]   H. H. Shi, H. Sato and M. Itoh, “Non-Newtonian supersonic liquid jets,” Proceedings of the 25th International Symposium on Shock Waves, Bangalore, 17-22 July 2005, pp. 1105-1110.

[13]   F. P. Bowden and J. H. Brunton, “Damage to Solids by Liquid Impact at Supersonic Speeds,” Nature, Vol. 181, No. 4613, 1958, pp. 873-875. doi:10.1038/181873a0

[14]   B. Natan and S. Rahimi, “The Status of Gel propellants in Year 2000,” In: (K. K. Kuo and L. T. DeLuca, Eds., Combustion of Energetic Materials, Begell House, New York, 2002, pp. 172-194.

[15]   R. W. Dexter, “Measurement of Extensional Viscosity of Polymer Solutions and Its Effects on Atomization from a Spray Nozzle,” Atomization and Sprays, Vol. 6, No. 2, 1996, pp. 167-191.

[16]   A. B. Metzner and J. C. Reed, “Flow of Non-Newtonian Fluids—Correlation of the Laminar, Transition, and Turbulent-Flow Regions,” A.I.Ch.E. Journal B1, Vol. 1, No. 4, 1995, pp. 434-440.

 
 
Top