OJOp  Vol.1 No.2 , December 2012
Optimization Model of Oil-Volume Marking with Tilted Oil Tank
In this paper, the relationship model between the oil volume and the vertically tilting parameter (α), the horizontally tilting parameter (β) and the displayed height of oil (h*) is first constructed with the tilted oil tank. Then, based on the data of the oil output volume at different time of day, an optimization model of oil-volume marking with tilted oil tank is established. Finally, parameters α = 2.2° and β = 3.05° are estimated by using nonlinear least squares method and the marking number of the tank-volume meter is given.

Cite this paper
W. Xie, X. Wang, H. Cui and J. Chen, "Optimization Model of Oil-Volume Marking with Tilted Oil Tank," Open Journal of Optimization, Vol. 1 No. 2, 2012, pp. 20-24. doi: 10.4236/ojop.2012.12004.
[1]   http://www.mcm.edu.cn/html_cn/node/d5ae730f57dea3208cae73f7635aeee8.html

[2]   E. Q. Gao and P. Y. Feng, “Calculation of the Reserve of Horizontal Cylindrical Oil Storage Tank Declined Fiting at Different Liquid Level,” Journal of Shandong Metallurgy, Vol. 1, 1998, pp. 26-28.

[3]   T. J. Tian, “Volume Calculation of the Straight Cylindric Part of Tihed Horizontal Tank,” Journal of Modern Measure and Test, Vol. 5, 1999, pp. 32-36.

[4]   F. J. Sun, “A Discussion on Some Difficulties in Calibration Calculation of Horizontal Oil Tank Volume,” Journal of Petroleum Products Application Research, Vol. 18, No. 5, 2000, pp. 20-24.

[5]   X. G. Pan, “Measurement and Calculation of Tilt Horizontal Tank Volume,” Journal of Oil & Gas Storage and Transportation, Vol. 6, No. 6, 1987, pp.47-50.