SGRE  Vol.1 No.2 , August 2010
The Initial Parameters Design of the Voltage Source Converter Fed SMES
ABSTRACT
The initial parameters of the superconducting magnetic energy storage (SMES) fed by a voltage source converter (VSMES) are studied and the setting rules are designed in this paper. A time-domain simulation model is established by using the software PSCAD/EMTDC. Based on this model, the application of the VSMES in the power system is used to test the designed rules. The simulation results are valuable for the further research of the initial parameters design of the VSMES.

Cite this paper
nullX. Song, Z. Xu and T. Xiang, "The Initial Parameters Design of the Voltage Source Converter Fed SMES," Smart Grid and Renewable Energy, Vol. 1 No. 2, 2010, pp. 81-87. doi: 10.4236/sgre.2010.12013.
References
[1]   Y. Yang, “Development of Superconducting Technique and Its Application in Power System,” Power System Technology, Vol. 25, No. 9, 2001, pp. 48-60.

[2]   Y. Shirai and T. Nitta, “On-line Evaluation of Power System Stability by Use of SMES,” IEEE Power Engineering Society Winter Meeting, New York, Vol. 2, 2002, pp. 900-905.

[3]   Y. Ohsawa, Y. Maruoka, H. Takeno, et al., “Determination of Installation Location of SMES for Power System Stabilization,” Proceedings of the 2000 IEEE International Symposium on Circuits and Systems, Geneva, 2000, pp. 233-236.

[4]   Y. Li, S. J. Cheng, Y. Pan and Y. J. Tang, “Time Domain Simulation of the Characteristics for a Voltage Source Converter Fed SMES,” Automation of Electric Power Systems, Vol. 26, No. 18, 2002, pp. 60-63.”

[5]   X. Liu, X. G. Zhu, X. Chu and X. H. Jiang, Voltage Sag Compensation by SMES,” Automation of Electric Power Systems, Vol. 28, No. 3, 2004, pp. 40-44.

[6]   H. Zhang, P. C. Zhu, Y. Kang and J. Chen, “Improving Damping of Generator using Superconducting Magnetic Energy Storage Systems,” Power Electronics, Vol. 37, No. 1, 2003, pp. 50-53.

[7]   S. X. Zhou, W. Wu, J. L. Wu and N. An, “Application of Superconducting Magnetic Energy Storate to Improve Transient Voltage Stability,” Power System Technology, Vol. 28, No. 4, 2004, pp. 1-5

 
 
Top