Back
 ENG  Vol.4 No.12 , December 2012
Development and Assessment of Thermoacoustic Generators Operating by Waste Heat from Cooking Stove
Abstract: This paper presents the development and assessment of two low-cost, travelling wave, thermoacoustic generators operating by waste heat energy from cooking stove. One powered by waste heat from a propane-driven stove, the other powered by waste heat from a wood-burning stove. The propane-driven thermoacoustic generator was successfully demonstrated to produce approximately 15 watts of electricity using a commercial audio loudspeaker. The wood-burning thermoacoustic generator was successfully constructed and tested to generate a maximum of 22.7 watts of electricity under a pressurised condition. The latter has a high potential to be used by over 1.5 billion people in rural communities for applications such as LED lighting, charging mobile phones or charging a 12V battery. A comprehensive power assessment of the propane-driving generator as well as the development and performance assessment of the wood-burning generator are described throughout this article.
Cite this paper: B. Chen, A. Yousif, P. Riley and D. Hann, "Development and Assessment of Thermoacoustic Generators Operating by Waste Heat from Cooking Stove," Engineering, Vol. 4 No. 12, 2012, pp. 894-902. doi: 10.4236/eng.2012.412113.
References

[1]   K. De Blok, “Low Operating Temperature Integral Thermo Acoustic Devices for Solar Cooling and Waste Heat Recovery,” Journal of the Acoustical Society of America, Vol. 123, No. 5, 2008, pp. 3541-3541. doi:10.1121/1.2934526

[2]   B. M. Chen, P. H. Riley, Y. A. Abakr, K.Pullen, D. B. Hann and C. M. Johnson, “Design and Development of a Low-Cost, Electricity-Generating Cooking Score-Stove?,” IET Renewable Power Generation, 2011.

[3]   C. R. Saha, P. H. Riley, C. M. Johnson, J. Paul, Z. Yu and A. J. Jaworski, “Halbach Array Linear Alternator for Thermo-Acoustic Engine,” Energy Conversion and Management Journal, Vol. 178, 2012, pp. 179-187.

[4]   S. Backhaus and G. Swift, “A Thermoacoustic-Stirling Heat Engine: Detailed Study,” The Journal of the Acoustical Society of America, Vol. 107, No. 6, 2000, pp. 31483166. doi:10.1121/1.429343

[5]   G. W. Swift, “Thermoacoustic Engines,” The Journal of the Acoustical Society of America, Vol. 84, No. 4, 1988, pp. 1145-1180. doi:10.1121/1.396617

[6]   G. W. Swift and S. L. Garrett, “Thermoacoustics: A Unifying Perspective for Some Engines and Refrigerators,” The Journal of the Acoustical Society of America, Vol. 113, No. 5, 2003, pp. 2379-2381. doi:10.1121/1.1561492

[7]   Z. Yu, A. J. Jaworski and S. Backhaus, “Design of a Low-Cost Thermoacoustic Electricity Generator and Its Experimental Verification,” ASME 10th Biennial Conference on Engineering Systems Design and Analysis, Vol. 1, 2010, pp. 191-199.

[8]   E. C. Luo, Z. H. Wu, W. Dai, S. F. Li and Y. Zhou, “A 100 W-Class Traveling-Wave Thermoacoustic Electricity Generator,” Chinese Science Bulletin, Vol. 53, No. 9, 2008, pp. 1453-1456. doi:10.1007/s11434-008-0200-1

[9]   G. Yu, E. Luo, W. Dai and Z. Wu, “An Energy-Focused Thermoacoustic-Stirling Heat Engine Reaching a High Pressure Ratio above 1.40,” Cryogenics, Vol. 47, No. 2, 2007, pp. 132-134. doi:10.1016/j.cryogenics.2006.12.001

[10]   Z. Yu and A. J. Jaworski, “Impact of Acoustic Impedance and Flow Resistance on the Power Output Capacity of the Regenerators in Travelling-Wave Thermoacoustic Engines,” Energy Conversion and Management, Vol. 51, No. 2, 2010, pp. 350-359. doi:10.1016/j.enconman.2009.09.032

[11]   C. L. C. Gardner, “Design of a Standing-Wave Thermoacoustic Engine,” The Sixteenth International Congress on Sound and Vibration, Krakow, 5-9 July 2009.

[12]   S. B. Z. Yu and A. J. Jaworski, “Design and Testing of a Travelling-Wave Looped-Tube Engine for Low-Cost Electricity Generators in Remote and Rural Areas,” 7th International Energy Conversion Engineering Conference, Denver, 2-5 August 2009.

[13]   Y. Z. Abduljalil and A. J. Jaworski, “Experimental Characterisation of Low-Cost Regenerators for TravellingWave Thermoacoustic Devices,” Proceedings of 7th Annual International Energy Conversion Engineering Conference, Denver, 2-5 August 2009.

[14]   C. R. Saha, P. H. Riley, C. M. Johnson and J. Paul, “Application of Thermo-Acoustic, Electrical Generating Engines in Rural Areas,” IIT Delhi, Delhi, 7-9 September 2010.

 
 
Top