ABSTRACT Gas flows through micro shock tubes are widely used in many engineering applications such as micro engines, particle delivery devices etc. Recently, few studies have been carried out to explore the shock wave excursions through micro shock tubes at very low Reynolds number and at rarefied gas condition. But these studies assumed centered shock and expansion waves, which are generally produced by instantaneous diaphragm rupture process. But in real scenario, the diaphragm ruptures with a finite rupture time and this phenomenon will significantly alter the shock wave propagation characteristics. In the present research, numerical simulations have been carried out on a two dimensional micro shock tube model to simulate the effect of finite diaphragm rupture process on the wave characteristics. The rarefaction effect was simulated using Maxwell’s slip wall equations. The results show that shock wave attenuates rapidly in micro shock tubes compared to conventional macro shock tubes. Finite diaphragm rupture causes the formation of non-centered shock wave at some distance ahead of the diaphragm. The shock propagation distance is also drastically reduced by the rupture effects.
Cite this paper
A. Rajagopal, H. Kim and T. Setoguchi, "Computational Study on Micro Shock Tube Flows with Gradual Diaphragm Rupture Process," Open Journal of Fluid Dynamics, Vol. 2 No. 4, 2012, pp. 235-241. doi: 10.4236/ojfd.2012.24A027.
 I. I. Glass and J. P. Sislian, “Non Stationary Flows and Shock Waves, Oxford Science,” Oxford Science, New York, 1994.
 G. Rudinger and J. P. Sislian, “Wave Diagrams for NonSteady Flows in Ducts,” D. Van Nostrand Company Inc., Princeton, 1995.
 M. Brouillette, “Shock Waves at Microscales,” Shock Waves, Vol. 13, No. 1, 2003, pp. 3-12.
 G. E. M. Karniadakis and A. Beskok, “Micro Flows Fundamentals and Simulation,” Springer, New York, 2000.
 D. E. Zeitoun and Y. Burtschell, “Navier-Stokes Computations in Micro Shock Tubes,” Shock Waves, Vol. 15, No. 3-4, 2006, pp. 241-246. doi:10.1007/s00193-006-0023-4
 D. E. Zeitoun, Y. Burtschell, I. A. Graur, M. S. Ivanov, A. N. Kudryavtsev and Y. A. Bondar, “Numerical Simulation of Shock Wave Propagation in Microchannels using Continuum and Kinetic Approaches,” Shock Waves, Vol. 19, No. 4, 2009, pp. 307-316.
 R. S. Hichman, L. C. Farrar and J. B. Kyser, “Behavior of Burst Biaphragms in Shock Tubes,” Physics of Fluids, Vol. 18, No. 10, 1975, pp. 1249-1252.
 E. Outa, K. Tajima and K. Hayakawa, “Shock Tube Flow Influenced by Diaphragm Opening (Two-Dimensional Flow Near the Diaphragm),” 10th International Symposium on Shock Waves and Shock Tubes, Kyoto, 14-16 July 1975, pp. 312-319.
 S. Matsuo, M. Mohammad, S. Nakano and H. D. Kim, “Effect of Diaphragm Rupture Process on Flow Characteristics in a Shock Tube using Dried Cellophane,” Proceedings of the International Conference on Mechanical Engineering (ICME), Dhaka, 29-31 December, 2007.
 E. M. Rothkopf and W. Low, “Diaphragm Opening Process in Shock Tubes,” Physics of Fluids, Vol. 17, No. 6, 1974, pp. 1169-1173.
 E. M. Mizoguchi and S. Aso, “The Effect of Diaphragm Opening Time on the Feasibility of Tuned Operation in Free Piston Shock Tunnels,” Shock Waves, Vol. 19, No. 4, 2009, pp. 337-347.
 K. R. Arun, H. D Kim and T. Setoguchi, “Computational Study of Shock Wave Propagation and Reflection in a Micro Shock Tube,” 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Malta, 16-18 July 2012, pp. 1335-1340.