ENG  Vol.2 No.8 , August 2010
Behaviour of a Composite Concrete-Trapezoidal Steel Plate Slab in Fire
Abstract: The present paper investigates fire resistance of a simply-supported composite concrete-trapezoidal steel sheet slab. The objective is to find out if a steel sheet, as a moisture diffusion barrier, may substantially effect the hydro-thermal situation in the concrete part of the cross-section. The numerical integration of the equations of a coupled hygro-thermal boundary-value problem (Tenchev, R.T., Li, L.Y. and Purkiss, J.A. (2001) Num. Heat Transfer Part A, 39(7), 685-710), with and without considering the barrier, shows that the barrier does not really effect the magnitude and the development of temperatures over the cross-section, while there is a significant effect on the pattern of moisture transport and the magnitude of vapour pressure. Particularly high magnitudes of vapour pressure (about 4.5 MPa) were shown in cases where the steel sheet was considered in analyses, which indicates a possible micro damage of concrete in the web of the section, although spalling probably cannot take place due to the steel sheet cover. As the typical composite slab investigated here is not sufficiently fire resistant without any additional reinforcement bars placed in the web, further in-vestigations are directed to finding an optimal position and area of these bars. Following a simplified procedure given in EC2 (Eurocode 2, Design of Concrete Structures, Part 1.2 (2004) Structural fire design, European Committee for Standardization) and assuming that the present composite slab is subject to the uniform traction , yields that placing one bar with the area 1.153 cm2 4 cm away from the edge suffices for the 60 min fire resistance of the slab.
Cite this paper: nullT. Hozjan, M. Saje, I. Planinc, S. Srpčič and S. Bratina, "Behaviour of a Composite Concrete-Trapezoidal Steel Plate Slab in Fire," Engineering, Vol. 2 No. 8, 2010, pp. 594-601. doi: 10.4236/eng.2010.28076.

[1]   A. V. Luikov, “Systems of Differential Equations of Heat and Mass Transfer on Capillary-Porous Bodies,” Inter- national Journal of Heat and Mass Transfer, Vol. 18, No. 1, 1975, pp. 1-14.

[2]   Z. P. Ba?ant and W. Thonguthai, “Pore Pressure and Drying of Concrete at High-Temperature,” Journal of Engineering Mechanics Division-ASCE, Vol. 104, No. 5, 1978, pp. 1059-1079.

[3]   C. T. Davie, C. J. Pearce and N. Bi?ani?, “Coupled Heat and Moisture Transport in Concrete at Elevated Tempera- tures - Effects of Capillary Pressure and Absorbed Water,” Numerical Heat Transfer Part A, Vol. 49, No. 8, 2006, pp. 733-763.

[4]   D. Gawin, F. Pesavento and B. A. Schrefler, “Towards Prediction of the Thermal Spalling Risk through a Multi- Phase Porous Media Model of Concrete,” Computer Methods in Applied Mechanics and Engineering, Vol. 195, No. 41-43, 2003, pp. 5707-5729.

[5]   R. T. Tenchev, L. Y. Li and J. A. Purkiss, “Finite Ele- ment Analysis of Coupled Heat and Moisture Transfer in Concrete Subjected to Fire,” Numerical Heat Transfer Part A, Vol. 39, No. 7, 2001, pp. 685-710.

[6]   Z. P. Ba?ant and M. F. Kaplan, “Concrete at High Tem- peratures: Material Properties and Mathe-matical Mo- dels,” Longman, Harlow, 1996.

[7]   T. Hozjan, “Non-Linear Analysis of Composite Planar Structures Exposed to Fire,” Ph.D. Dissertation, Uni- versity of Ljubljana, Faculty of Civil and Geodetic Engi-neering, 2009.

[8]   ISO 834, “Fire Resistance Tests-Elements of Building Constructions,” International Standard ISO 834, 1975.

[9]   Eurocode 2, “Design of Concrete Structures, Part 1.2, Structural Fire Design,” European Committee for Stand- ardization, 2004.

[10]   G. A. Khoury, C. E. Majorana, F. Pesavento and B. A. Schrefler, “Modelling of Heated Concrete,” Magazine of Concrete Research, Vol. 54, No. 2, 2002, pp. 77-101.

[11]   G. Williams-Leir, “Creep of Structural Steel in Fire: Analytical Expressions,” Fire and Materials, Vol. 7, No. 2, 1983, pp. 73-78.