ENG  Vol.2 No.8 , August 2010
Tunable Erbium-Doped Fiber Lasers Using Various Inline Fiber Filters
Abstract: Several high-performance and tunable erbium-doped fiber lasers are reviewed. They are constructed by using fiber Bragg gratings (FBGs) or short-wavelength-pass filters (SWPFs) as wavelength tunable components inside the laser cavity. Broadband wavelength tuning range including C- and/or S-band was achieved, and tunable laser output with high slope efficiency, high side-mode suppression ratio was obtained. These fiber lasers can find vast applications in lightwave transmission, optical test instrument, fiber-optic gyros, spectroscopy, material processing, biophotonic imaging, and fiber sensor technologies.
Cite this paper: S. Liaw, K. Hsu, N. Chen and "Tunable Erbium-Doped Fiber Lasers Using Various Inline Fiber Filters," Engineering, Vol. 2 No. 8, 2010, pp. 585-593. doi: 10.4236/eng.2010.28075.

[1]   A. Bellemare, J. F. Lemieux, M. Tetu and S. LaRochelle, “Erbium-Doped Ring Lasers Step-Tunable to Exact Multiples of 100 Ghz (ITU-GRID) Using Periodic ?lter,” Proceedings of ECOC’98, Madrid, September 1998, pp. 153-154.

[2]   C. S. Kim and J. U. Kang, “Multiwavelength Switching of Raman Fiber Ring Laser Incorporating Composite Polarization-Main Maintaining Fiber Lyot-Sagnac Filter,” Applied Optics, Vol. 43, No. 15, 2004, pp. 3151-3157.

[3]   C. C. Lee, Y. K. Chen and S. K. Liaw, “Single-Longitu- dinal-Mode Fiber Laser with Passive Multiple-Ring Cavity and its Application for Video Transmission,” Optics Letters, Vol. 23, No. 5, 1998, pp. 358-360.

[4]   S. Kim, B. Lee and D. H. Kim, “Experiments on Chaos Synchronization in Two Separate Erbium-Doped Fiber Lasers,” IEEE Photonics Technology Letters, Vol. 13, No. 4, 2001, pp. 290-292.

[5]   Scott Foster, “Spatial Mode Structure of the Distributed Feedback Fiber Laser,” IEEE Journal of Quantum Electronics, Vol. 40, No. 7, 2004, pp. 884-892.

[6]   M. Kamil Abd-Rahman and H. Ahmad, “Multiwave- length Brillouin Erbium Fiber Laser Pumped from FBG Fiber Laser Sharing the Same EDF,” Proceedings of the 4th Pacific Rim Conference on Lasers and Electro-Optics, Chiba, July 2001, supplement, pp. 40-41.

[7]   H. Chen, F. Babin, M. Leblanc and G. W. Schinn, “Widely Tunable Single-Frequency Erbium-Doped Fiber Lasers,” IEEE Photonics Technology Letters, Vol. 15, No. 2, 2003, pp. 185-187.

[8]   D. Sabourdy, V. Kermene, A. Desfarges-Berthelemot, L. Lefort, A.Barthelemy, P. Even and D. Pureur, “Efficient Coherent Combining of Widely Tunable Fiber Lasers,” Optics Express, Vol. 11, No. 2, 2003, pp. 87-97.

[9]   Y. C. Zhao, S. Winnall and S. Fleming, “Tunable Fiber-Ring Laser Based on Broad-Band Fiber Bragg Grating and Bending Effects,” Microwave and Optical Technology Letters, Vol. 46, No. 6, 2005, pp. 562-563.

[10]   S. K. Liaw, W. Y. Jang, C. J. Wang and K. L. Hung, “Pump Efficiency Improvement of a C-Band Tunable Fiber Laser Using Optical Circulator and Tunable Fiber Gratings,” Applied Optics, Vol. 46, No. 12, 2007, pp. 2280-2285.

[11]   S. K. Liaw and G. S. Jhong, “Tunable Fiber Laser Using a Broad-Band Fiber Mirror and a Tunable FBG As Laser-Cavity Ends,” IEEE Journal of Quantum Electronics, Vol. 44, No. 6, 2008, pp. 520-527.

[12]   N. K. Chen, S. Chi and S. M. Tseng, “An Efficient Local Fundamental-Mode Cutoff for Thermo-Optic Tunable Er3+-Doped Fiber Ring Laser,” Optics Express, Vol. 13, No.18, 2005, pp. 7250-7255.

[13]   N. K. Chen, C. M. Huang, S. Chi and Y. Lai, “Towards The Short-Wavelength Limit Lasing at 1450 Nm over I-4(13/2)-> I-4(15/2) Transition in Silica-Based Erbium- Doped Fiber,” Optics Express, Vol. 15, No. 25, 2007, pp. 16448-16456.

[14]   A. D. Kersey, M. A. Davis, H. J. Patrick, M. LeBlanc, K. P. Koo, C. G. Askins, M. A .Putnam and E. J. Friebele, “Fiber Grating Sensors,” Journal of Lightwave Techno- logy, Vol. 15, No. 8, 1997, pp. 1442-1463.

[15]   M. Arbore, Y. Zhou, H. Thiele, J. Bromage and L. Nelson, “S-Band Erbium-Doped Fiber Amplifiers for WDM Transmission between 1488 and 1508 Nm,” Proceedings of Optical Fiber Communication Conference, Georgia, 23-28 March 2003, pp. 374-376.

[16]   M. A. Arbore, “Application of Fundamental-Mode Cutoff for Novel Amplifiers and Lasers,” Proceedings of Optical Fiber Communication Conference, (OFC 2005), Anaheim, Vol. 5, 6-11 March 2005.

[17]   N. K. Chen, K. C. Hsu, S. Chi and Y. Lai, “Tunable Er3+-Doped Fiber Amplifiers Covering S and C+L Bands over 1490?1610 Nm Based on Discrete Fundamental-Mode Cutoff Filters,” Optics Letters, Vol. 31, No. 19, 2006, pp. 2842-2844.

[18]   S. Y. Chou, K. C. Hsu, N. K. Chen, S. K. Liaw, Y. S. Chih, Y. Lai and S. Chi, “Analysis of Thermo-Optic Tunable Dispersion-Engineered Short-Wavelength-Pass Tapered-Fiber Filters,” Journal of Lightwave Technology, Vol. 27, No. 13, 2009, pp. 2208-2215.