WJM  Vol.2 No.6 , December 2012
Dynamic Performance Research on Reversing Valve of Hydraulic Breaker
ABSTRACT
The structure and operational principle on a new type reversing valve of hydraulic breaker are introduced. The nonlinear mathematic model and simulation model of the new type reversing valve are built. The dynamic simulation research of the new type reversing valve is conducted. The effects of the system parameters on the working performance are researched systematically and deeply. The regular understanding on the motion of the reversing valve is obtained, which provides theoretical basis for the innovation and manufacturing of a new generation of hydraulic breaker reversing valve.

Cite this paper
G. Yang, Y. Chen and B. Chen, "Dynamic Performance Research on Reversing Valve of Hydraulic Breaker," World Journal of Mechanics, Vol. 2 No. 6, 2012, pp. 288-296. doi: 10.4236/wjm.2012.26035.
References
[1]   G. P. Yang and C. P. Liang, “A Research on the New Hydraulic Impactor Control System,” 2010 International Conference on Measuring Technology and Mechatronics Automation, Changsha, 13-14 March 2010, pp. 291-293.

[2]   G. P. Yang, L. H. Chen and H. Huang, “The Research of a Full Hydraulic Pressure Hydraulic Impactor with Strike Energy and Frequency Adjusted Independently,” The 6th International Conference on Fluid Power Transmission and Control, Hangzhou, 1-5 September 2005, pp. 262265.

[3]   G. P. Yang, “Research of a Full Hydraulic Pressure Hydraulic Impactor with Strike Energy and Frequency Adjusted Independently,” Journal of Hunan University of Science & Technology (Natural Science Edition), Vol. 21, No. 1, 2006, pp. 25-28.

[4]   G. P. Yang, “Research on Design Theory on the Return Oil Chamber of a New Hydraulic Impactor,” China Journal of Highway and Transport, Vol. 15, No. 1, 2002, pp. 113-115.

[5]   X. B. Yang and G. P. Yang, “The Research of a Pressure Feedback Full Hydraulic Pressure Hydraulic Impactor with Strike Energy and Frequency Adjusted Independently,” China Mechanical Engineering, Vol. 13, No. 23, 2002, pp. 2044-2047.

[6]   G. P. Yang, “Research on Computer Simulation for a New Pilot Type Hydraulic Impactor System,” Mechanical Science and Technolgy, Vol. 25, No. 2, 2006, pp. 233237.

[7]   G. P. Yang, F. L. Zhu and G. J. Long, “Research on Design Theory on the Return Oil Chamber of a New Hydraulic Impactor,” China Mechanical Engineering, No. 12, 2003, pp. 1062-1065.

[8]   G. P. Yang, J. H. GAO and B. CHEN, “Computer Simulation of Controlled Hydraulic Impactor System,” Advanced Materials Research (Materials Science and Engineering), Vol. 179-180, 2011, pp. 122-127.

[9]   G. P. Yang, B. Chen and J. H. Gao, “Improved Design and Analysis of Hydraulic Impact Hammer Based on Virtual Prototype Technology,” Applied Mechanics and Materials (Measuring Technology and Mechatronics Automation), Vol. 48-49, 2011, pp. 607-610. doi:10.4028/www.scientific.net/AMM.48-49.607

[10]   G. P. Yang, “The Application of Stress Wave Theory in Concrete Impact Crushing,” China Journal of Highway and Transport, Vol. 6, No. 2, 2000, pp. 124-126.

 
 
Top