TI  Vol.3 No.4 , November 2012
Embedded Processor’s Application to the Beam Quality Analyzer
Abstract: Introduces the bus standard of an embedded processor named PC104, discusses the embedded laser beam quality analyzer software and hardware design based on the standards, and gives the test results of the instrument. It was shown that if the embedded technique was used for beam quality measurement, functional integration of the beam quality analyzing equipment can be achieved. That is the all in one system including the function of data acquisition and processing, beam quality factor calculation, results shown and the network communication, which has advantages such as small volume, powerful function, high reliability, good extension and so on. A better solution for application the beam quality analyzer into the industry field was provided in the paper.
Cite this paper: C. Wang, "Embedded Processor’s Application to the Beam Quality Analyzer," Technology and Investment, Vol. 3 No. 4, 2012, pp. 262-265. doi: 10.4236/ti.2012.34036.

[1]   B. Dai, “Laser Technology and Industrial Applications,” Equipment Manufacturing Technology, Vol. 3, No. 2, 2009, pp. 127-128.

[2]   J.-Z. Zhen, S. H. Guan and Q. X. Yu, “Evaluation Methods for Laser Beam Quality,” Journal of Dalian Nationalities University, Vol. 10, No. 1, 2008, pp. 53-57.

[3]   H. X. Tian, J. F. Yang and X. L. Ma, “Design for Visible Video Zoom Optical System,” Acta Photonica Sinica, Vol. 37, No. 9, 2008, pp. 1797-1799.

[4]   Y. Chen, X. P. Liu and H. Q. Ying, “High Quality and Portable Data Acquisition System Based on PC104 Bus,” Measurement & Control Technology, Vol. 28, No. 1, 2009, pp. 24-27.

[5]   L. Xiao, J. H. Bai, G. S. Ji, Y. Q. Hu and X. D. Zhan, “Design of Motion Controller Based on PC104,” Mechanical & Electrical Engineering Magazine, Vol. 26, No. 6, 2009, pp. 68-70.

[6]   P. X. Rong and Z. J. He, “Design of Numerical Control System for Stepper Motor,” Electric Machines and Control, Vol. 13, No. 2, 2009, pp. 272-275.