ABSTRACT Stellite 720 is a high-carbon Co-Cr-Mo alloy, designed for severe wear/corrosion environments. This article presents a study of the Stellite 720 coating on stainless steel 304 under block-on-ring wear test. The coating is deposited through a slurry/powder metallurgy sintering process. Micro-hardness indentation test is conducted on the cross section of the coating specimen to investigate the hardness of individual phases of the coating material and the dilution effect of the substrate material on the coating layer. The tribological behavior of the coating under low and high load wear is investigated. The worn surfaces of the coating specimens are analyzed using a Philips XL30S FEG scanning electron micro- scope (SEM) with an EDAX energy dispersive X-ray (EDX) spectroscopy system. The experimental results are discussed to explore the wear mechanisms of the Stellite 720 coating under block-on-ring wear.
Cite this paper
R. Liu, Q. Yang and F. Gao, "Tribological Behavior of Stellite 720 Coating under Block-on-Ring Wear Test," Materials Sciences and Applications, Vol. 3 No. 11, 2012, pp. 756-762. doi: 10.4236/msa.2012.311110.
 J. R. Davis, “Nickel, Cobalt, and Their Alloys,” ASM International, Materials Park, 2000.
 W. Betteridge, “Cobalt and Its Alloys,” Halsted Press, Chichester, 1982.
 A. Frenk and J. D. Wagnière, “Laser Cladding with Cobalt-Based Hardfacing,” Journal of Physics, Vol. IV, 1991, pp. 65-68.
 A. Frenk and W. Kurz, “Microstructural Effects on the Sliding Wear Resistance of a Cobalt-Based Alloy,” Wear, Vol. 174, No. 1-2, 1994, pp. 81-91.
 C. J. Heathcock, A. Ball and B. E. Protheroe, “Cavitation Erosion of Cobalt-Based Stellite Alloys, Cemented Car- bides and Surface-Treated Low Alloy Steels,” Wear, Vol. 74, No. 1, 1981, pp. 11-26.
 L. C. Wang and D. Y. Li, “Effects of Yttrium on Microstructure, Mechanical Properties, High-Temperature Wear Behaviour of Cast Stellite 6 Alloy,” Wear, Vol. 255, No. 1-6, 2003, pp. 535-544.
 I. Radu, D. Y. Li and R. Llewellyn, “Tribologocal Behaviour of Stellite 21 Modified with Yttrium,” Wear, Vol. 257, No. 11, 2004, pp. 1154-1166.
 I. Radu and D. Y. Li, “The Wear Performance of Yttrium-Modified Stellite 712 at Elevated Temperatures,” Tribology International, Vol. 40, No. 2, 2007, pp. 254- 265. doi:10.1016/j.triboint.2005.09.027
 H. Celik and M. Kaplan, “Effects of Silicon on the Wear Behavior of Cobalt-Based Alloys at Elevated Temperature,” Wear, Vol. 257, No. 5-6, pp. 606-611.
 F. Stott, D. Lin and G. Wood, “Glazes Produced on Nickel- Base Alloys During High Temperature Wear,” Nature, Vol. 242, 1973, pp. 75-77.