SGRE  Vol.3 No.4 , November 2012
WIMAX Implementation of Smart Grid Wide Area Power System Load Protection Model in MATLAB/SIMULINK
ABSTRACT
As the revolutionary change in electric power industry begins with the latest communication infrastructure, it is on the verge of a revolutionary transformation to develop a smart grid to meet the requirements of our digital society. Wide Area Power System is made up of plentiful automated transmission and distribution systems with strong communication infrastructure, all operating in a coordinated, proficient and reliable mode. This paper is fretful with the wide area power system load protection scheme and ensuing design requirement that enhances stability as well as control. It discusses the architecture that upgrades the existing scheme by controlling all the control signals traffic between generating units, server, connected loads, and protection devices using WIMAX. The main theme of the paper is on the use of information technology to obtain more flexibility and smartness in the Wide Area Power System Load Protection by designing the Communication channel using WIMAX. Faults detected in Local area networks and Information regarding the faults of Local Areas is communicated to Load Area Manager (LAM) which takes required control action to handle it. Finally the paper shows islanding operation through WAM for the areas that becomes intensive faulty. Results have been verified in MATLAB/ SIMULIMK.

Cite this paper
A. Khan, M. Ali, I. Ahmad, A. Ullah, H. Rahman and H. Rahman, "WIMAX Implementation of Smart Grid Wide Area Power System Load Protection Model in MATLAB/SIMULINK," Smart Grid and Renewable Energy, Vol. 3 No. 4, 2012, pp. 282-293. doi: 10.4236/sgre.2012.34039.
References
[1]   G. Heydt, C. Liu, A. G. Phadke and V. Vital, “Solution for the Crisis in Electric Power Supply,” IEEE Computer Applications Power, Vol. 14, No. 3, 2001, pp. 22-30. doi:10.1109/MCAP.2001.952933

[2]   M. Begovic, V. Madani and D. Novosel, “System Integrity Protection Systems,” IREP Symposium of Bulk Power System Dynamics and Control VII, Charleston, August 2007.

[3]   I. Dobson, J. Chen, J. Thorp, B. Carreras and D. Newman, “Examining Critically of Blackouts in Power System Models with Cascading Outages,” 35th International Conference on System Sciences, Big Island, January 2002.

[4]   M. Erol-Kantarci and H. T. Mouftah, “TOU-Aware Energy Management and Wireless Sensor Networks for Reducing Peak Load is Smart Grids,” IEEE 72nd of Vehicular Technology Conference Fall, Ottawa, 6-9 September 2012, pp. 1-5.

[5]   K. R. Santhi and G. S. Kumaran, “Migration to 4G: Mobile IP Based Solutions,” Proceedings of the Advanced International Conference on Telecommunications and International Conference on Internet and Web Applications and Services, 19-25 February 2006, p. 76.

[6]   W. Roh and V. Yanover, “Introduction to WiMAX Technology,” WiMAX Evolution: Emerging Technologies and Applications, John Wiley & Sons Ltd., Chichester, 2009.

[7]   J. Bertsch, C. Carnal, D. Karlsson, J. Mdaniel and K. Vu, “Wide-Area Protection and Power System Utilization,” Proceedings of the IEEE, Vol. 93, No. 5, 2005, pp. 997-1003.

[8]   “System Protection Schemes in Power Networks,” CIGRE, Paris, France, TF 38.02.19, 2001.

[9]   C. Rehtanz, “Online Stability Assessment and Wide Area Protection Based on Phasor Measurements,” Bulk Power System Dynamics and Control V, Onomichi, 2001.

[10]   W. H. Quaintance, et al., “Raising Energy Transfer in Corridors Constrained by Voltage Instability-Statnett Case,” IEEE Power Engineering Society Summer Meeting, Vol. 4, 2000, pp. 2021-2026.

[11]   M. G. Adamiak, A. P. Apostolov, M. M. Begovic, C. F. Henville, K. E. Martin, G. L. Michel, A. G. Phadke and J. S. Thorp, “Wide Area Protection-Technology and Infrastructures,” IEEE Transactions on Power Delivery, Vol. 21, No. 2, 2006, pp. 601-609. doi:10.1109/TPWRD.2005.855481

[12]   “N Times 64 Kilobit per Second Optical Fiber Interfaces between Teleprotection and Multiplexer Equipment,” IEEE Std. C37.94, 2002.

[13]   “Guide for Surge Withstand Capability Tests and Subsequent Revisions,” ANSI/IEEE Std. C37.90a.

[14]   E. Veldman, M. Gibescu, J. G. Slootweg and W. L. Kling, “Technical Benefits of Distributed Storage and Load Management in Distributed Grid,” IEEE Bucharest of PowerTech, Bucharest, 28 June-1 July 2009, pp. 1-8.

[15]   V. Madani and D. Novosel, “Getting a Grip on the Grid,” IEEE Spectrum, Vol. 42, No. 12, 2005, pp. 42-47. doi:10.1109/MSPEC.2005.1549781

[16]   D. Karlsson, L. Broski and S. Ganesan, “Maximizing Power System Stability through Wide Area Protection,” Presented to 57th Annual Conference for Protective Relay Engineers, Texas, 30 March-1 April 2004.

[17]   H. Hou, D. You, X. G. Yin, T. Q. Xu, M. L. Jin, X. K. He, B. Wang and Y. B. Xie, “A Newly Developed Line Protection with Ethernet Communication Interface Based on 1EC61850,” International Conference on Power System Technology, Chongqing, 22-26 October 2006, pp. 1-4. doi:10.1109/ICPST.2006.321444

[18]   S. Shokooh, T. Khandelwal, F. Shokooh, J. Tastet and J. J. Dai, “Intelligent Load Shedding Need for a Fast and Optimal Solution,” IEEE PCIC Europe, 2005.

[19]   V. Skendzic and A. Guzmia, “Enhansing Power System Automation through the Use of Real-Time Ethernet,” Power Systems Conference: Advanced Metering, Protection, Control, Communication, and Distributed Resources, Clemson, 14-17 March 2006, pp. 480-495.

 
 
Top