Back
 EPE  Vol.2 No.3 , August 2010
A Burning Experiment Study of an Integral Medical Waste Incinerator
Abstract: Mass burning of the medical waste is becoming attractive in China because Chinese government has banned landfilling of medical waste. Many advantages can be found in this method, such as reduction in waste volume, destruction of pathogens and transformation of waste into the form of ash. However, the medical waste with high moisture in China is not suitable to be treated in the present direct mass burning incinerators. In this paper, a novel integral incinerator is developed with combining a feeder, a rotary grate, a primary combustion chamber (PCC) and a “coaxial” secondary combustion chamber (SCC) into a unique unit. Its capability is 10 ton/day. As the air excess level in the PCC was only 40% stoichiometric ratio, the PCC acted as a gasifier. The 1.0 excess air ratios in the SCC preserved the purpose of full combustion of flue gas. Temperature and pollutants concentration in the SCC were measured to understand the combustion behavior of volatile organics. Emission concentrations of pollutants before stack were also tested and compared with the China National Incineration Emission Standard.
Cite this paper: nullR. Xie, J. Lu, J. Li and J. Yin, "A Burning Experiment Study of an Integral Medical Waste Incinerator," Energy and Power Engineering, Vol. 2 No. 3, 2010, pp. 175-181. doi: 10.4236/epe.2010.23026.
References

[1]   R. Xie, W. J. Li, J. Li, et al., “Emissions Investigation for A Novel Medical Waste Incinerator,” Journal of Hazardous Materials, Vol. 166, No. 1, 2009, pp. 365-371.

[2]   J. M. Zhu, H. M. Zhu, X. G. Jiang, et al., “Analysis of Volatile Species Kinetics during Typical Medical Waste Pyrolysis Using A Distributed Activation Energy Model,” Journal of Hazardous Materials, Vol. 162, No. 2-3, 2009, pp. 646-651.

[3]   State Environmental Protection Administration of China, “Standard for Pollution Control on the Security Landfill for Hazardous Wastes,” National Technical Standard of China (GB 18598-2001).

[4]   W. R. Niessen, “Combustion and Incineration Processes,” 3rd Edition, Marcel Dekker Inc, New York, 2002.

[5]   C. C. Lee and G. L. Huffman, “Medical Waste Management Incineration,” Journal of Hazardous Materials, Vol. 48, No. 1-3, 1996, pp. 1-30.

[6]   A. F. Shaaban, “Process Engineering Design of Pathological Waste Incinerator with an Integrated Combustion Gases Treatment Unit,” Journal of Hazardous Materials, Vol. 145, No. 1-2, 2007, pp. 195-202.

[7]   D. E. Rogers and A. C. Brent, “Small-Scale Medical Waste Incinerators Experiences and Trials in South Africa,” Waste Management, Vol. 26, No. 11, 2006, pp. 1229-1236.

[8]   G. R. Woodle and J. M. Munro, “Particle Motion and Mixing in A Rotary Kiln,” Power Technology, Vol. 76, No. 3, 1993, pp. 187-190.

[9]   A. R. Lawrence, “Energy from Municipal Solid Waste: A Comparison with Coal Combustion Technology,” Progress in Energy and Combustion Science, Vol. 24, No. 6, 1998, pp. 545-564.

[10]   H. M. Zhu, J. H. Yan and X. G. Jiang, “Study on Pyrolysis of Typical Medical Waste Materials by Using TG- FTIR Analysis,” Journal of Hazardous Materials, Vol. 153, No. 1-2, 2008, pp. 670-676.

[11]   State Council of China, “Decree of the Medical Waste Management,” Chinese Environmental Science Press, Beijing, 2003.

[12]   L. Stieglitz and H. Vogg, “On Formation Conditions of PCDD/F in Flyash from Municipal Waste Incinerators,” Chemosphere, Vol. 16, No. 8-9, 1987, pp. 1917-1922.

[13]   B. K. Gullet, K. R. Bruce, L. O. Beach, et al., “Mechanistic Steps in the Production of PCCD and PCDF during Waste Combustion,” Chemosphere, Vol. 25, No. 7-10, 1992, pp. 1387-1392.

 
 
Top