JWARP  Vol.4 No.10 , October 2012
Process Window Determination for Biofiltration by the Taguchi Method
ABSTRACT
Raw water from the Yantian Reservoir in Southern China was used for this study. Several process parameters of biofiltration, temperature, media, empty bed contact time, ozone dosage and concentration of geosmin and MIB, were adopted in order to determine their effects. Experiments were conducted using the Taguchi method and 9 experiments were needed to obtain the best process parameter settings and parameter effects. The results of these experiments indicate the use of biological filtration as a method of geosmin and MIB removal, to be satisfactory. In addition, the results show that temperature impacts the removal rate of both geosmin and MIB. Useful insights into the effects of the filter media on such as, empty bed contact time, ozone dosage and concentration of geosmin and MIB were also obtained.

Cite this paper
M. Law, H. Chua, K. Cheng and C. Kan, "Process Window Determination for Biofiltration by the Taguchi Method," Journal of Water Resource and Protection, Vol. 4 No. 10, 2012, pp. 831-837. doi: 10.4236/jwarp.2012.410095.
References
[1]   D. Urfer, “Effects of Oxidants on Drinking Water Biofilters,” PhD Thesis, Department of Civil Engineering, University of Waterloo, Waterloo, 1988.

[2]   E. Namkung and B. E. Rittmann, “Removal of Taste- and Odor-Causing Compounds by Biofilms Grown on Humic Substances,” Journal of the American Water Works Association, Vol. 79, No. 7, 1987, pp. 107-112.

[3]   J. Antony, “Improving the Wire Bonding Process Quality Using Statistically Designed Experiments,” Microelectronics Journal, Vol. 30, No. 2, 1999, pp. 161-168. doi:10.1016/S0026-2692(98)00104-9

[4]   R. G. Bullington, et al., “Improvement of an Industrial Thermostat Using Designed Experiments,” Journal of Quality Technology, Vol. 25, No. 4, 1993, pp 262-271.

[5]   M. Hamada, “Using Statistically Designed Experiments to Improve Reliability and to Achieve Robust Reliability,” IEEE Transactions on Reliability, Vol. 44, No. 2, 1995, pp. 206-215. doi:10.1109/24.387372

[6]   M. Yagi, S. Nakashima and S. Muramoto, “Biological Degradation of Musty Odorcompounds, 2-Methylisoborneol and Geosmin, in a Bio-Activated Carbon Filter,” Water Science & Technology, Vol. 20, No. 8/9, 1988, pp. 255-260.

[7]   D. G. Bourne, G. J. Jones, R. L. Blakeley, A. Jones, A. P. Negri and P. Riddles, “Enzymatic Pathway for the Bacterial Degradation of the Cyanobacterial Cyclic Peptide Toxin Microcystin LR,” Applied & Environmental Microbiology, Vol. 62, No. 11, 1996, pp. 4086-4094.

[8]   Y. F. Tsang, “A Novel Biofiltration Technology for Odour Treatment,” PhD Thesis, Department of Civil and Structure Engineering, The Hong Kong Polytechnic University, 2009.

[9]   Metcalf and Eddy, “Wastewater Engineering: Treatment, Disposal, and Reuse,” McGraw-Hill, New York, 1991.

[10]   D. Urfer, P. M. Huck, S. D. J. Booth and B. M. Coffey, “Biological Filtration for BOM and Particule Removal: A Critical Review,” Journal of AWWA, Vol. 89, No. 12, 1997, pp. 83-98.

[11]   M. Bridget, H. Daniel, N. Gayle, P. Christopher and H. Lionel, “Enhancing the Biofiltration of Geosmin by Seeding Sand Filter Columns with a Consortium of Geosmin- Degrading Bacteria,” Water Research, Vol. 43, 2009, pp. 433-440. doi:10.1016/j.watres.2008.10.044

[12]   S. W. H. Lionel, “The Removal of Cyanobacterial Metabolites from Drinking Water Using Ozone and Granular Activated Carbon,” University of South Australia, Adelaide, 2004.

[13]   S. L. N. Elhadi, et al., “Removal of Geosmin and 2-Methylisoborneol,” Biological Filtration Water Science & Technology, Vol. 49, No. 9, 2004, pp. 273-280.

 
 
Top