AJAC  Vol.3 No.9 , September 2012
Study on the Surface Acoustic Wave Sensor with Self-Assembly Imprinted Film of Calixarene Derivatives to Detect Organophosphorus Compounds
Abstract: The molecularly imprinted technology and the self-assembly technique were used together on the calixarene surface acoustic wave (SAW) chemical sensors to detect organophosphorus compounds. 25-(thioalkyl-alkoxy)-p-tertbutylcalix[4] arene with self-assembled monolayer character was the sensitive coating of the sensors. The sensors had a special response to organophosphorus compounds and the response frequency shift of this sensor to organophosphorus compounds in 0.1 mg/m3 was 350 Hz. The response frequency increased linearly with the increase of the concentration of DMMP in the range from 0.1 to 0.6 mg/m3. The possible explanation of the interaction between the coatings and organophosphorus compounds was discussed.
Cite this paper: B. Cao, Q. Huang and Y. Pan, "Study on the Surface Acoustic Wave Sensor with Self-Assembly Imprinted Film of Calixarene Derivatives to Detect Organophosphorus Compounds," American Journal of Analytical Chemistry, Vol. 3 No. 9, 2012, pp. 664-668. doi: 10.4236/ajac.2012.39087.

[1]   L. J. Kepley and R. M. Crook, “Selective Surface Acoustic Wave-Based Organophonate Chemical Sensor Employing a Self-Assembled Composite Monolayer: A New Paradigm for Sensor Design,” Analytical Chemistry, Vol. 64, No. 24, 1992, pp. 3191-3193. doi:10.1021/ac00048a018

[2]   X. Guo, F. Liu and G.-Y. Lv, “Recent Progress on Study of Calixarene Derivatives,” Chinese Journal of Organic Chemistry, Vol. 25, No. 9, 2005, pp. 1021-1028.

[3]   D.-Q. Liu, Y.-Q. Feng and S.-X. Meng, “Progress of Calixarenes Used as Anion Receptor,” Chinese Journal of Organic Chemistry, Vol. 26, No. 4, 2006, pp. 419-430.

[4]   H. Lv, B.-Q. Cao and Y. Pan, “The application of Calixarene Used in SAW Chemical Sensor,” Chemical Sensors, Vol. 27, No. 2, 2007, pp. 7-11.

[5]   D. L. Dermody, R. M. Crooks and T. Kim, “Interactions between Organized, Surface-Confined Monolayers and Vapor-Phase Probe Molecules.11. Synthesis, Characterization, and Chemical Sensitivity of Self-Assembled Polydiacetylene/Calix[n]arene Bilayers,” Journal of American Chemistry Society, Vol. 118, No. 47, 1996, pp. 11912-11917. doi:10.1021/ja961302x

[6]   K. D. Schierbaum, T. Weiss and E. U. Thoden van Velzen, “Molecular Recognition by Self-Assembled Monolayers of Cavitand Receptors,” Science, Vol. 265, No. 5177, 1994, pp. 1413-1415. doi:10.1126/science.265.5177.1413

[7]   J. Rickert, T. Weiss and W. Gopel, “Detection of Oligonucleotide Sequences with Quartz Crystal Oscillators,” Sensors and Actuators B, Vol. B31, No. 1-2, 1996, pp. 45-50. doi:10.1016/0925-4005(96)80015-3

[8]   F. L. Dickert, P. Forth and J. W. Grate, “Molecular Imprinting in Chemical Sensing—Detection of Aromatic,” Fresenius Journal of Analytical Chemistry, Vol. 360, No. 7-8, 1998, pp. 759-762. doi:10.1007/s002160050801

[9]   C.-H. Wang, C.-Y. LI and X.-L. Xu, “Electrochemical Investigation of Parathion Impringred Sensor and Its Application,” Chinese Journal of Applied Chemistry, Vol. 23, No. 40, 2006, pp. 404-408.

[10]   J. W. Grate, S. L. Rose-Pehrsson and D. L. Venezky, “Smart Sensor System for Trace Organophos-Phorus and Organosulfur Vapor Detection Employing a Temperature-Controlled Array of Surface Acoustic Wave Sensors, Automated Sample Preconcentration, and Pattern Recognition,” Analytical Chemistry, Vol. 65, No. 14, 1993, pp. 1868-1881. doi:10.1021/ac00062a011