Back
 CS  Vol.1 No.1 , July 2010
The Design of an Intelligent Security Access Control System Based on Fingerprint Sensor FPC1011C
Abstract: This paper deals with the design of an intelligent access control system based on the fingerprint sensor FPC- 1011C. The design uses the S3C2410 and TMS320VC5510A as the system processor. A fingerprint acquisition module and a wireless alarm module were designed by using the fingerprint sensor FPC1011C and GPRS module SIM100 respectively. The whole system was implemented wireless alarm through messages and GPRS-Internet in the GSM/GPRS web. In order to achieve the simple and high Real-time system, the μC-Linux system migration was also implemented.
Cite this paper: Y. Wang, H. Liu and J. Feng, "The Design of an Intelligent Security Access Control System Based on Fingerprint Sensor FPC1011C," Circuits and Systems, Vol. 1 No. 1, 2010, pp. 30-33. doi: 10.4236/cs.2010.11005.
References

[1]   K. L. Zhou and Z. X. Lu, “Design of Vehicle Locks Based on DSP and Fingerprint Identification System,” Journal of Shanxi University of Science & Technology, Vol. 27, No. 5, 2009, pp. 103105.

[2]   C. G. Xie, “ARMBased Automatic Fingerprint Identifica-tion System,” Microcomputer Information, Vol. 25, No. 14, 2009, pp. 292294.

[3]   H. Guo, Y. S. Guo and Y. Chen, “The Implementation of Remote Meter Reading System Based on Linux and GPRS,” Application of Electronic Technique, Vol. 34, No. 11, 2008, pp. 8284.

[4]   F. Ding, “ARMBased Fingerprint Identification System Research and Implementation of [D],” South China Uni-versity of Technology, Guangzhou, 2007.

[5]   Z. M. Ma and Y. H. Xu, “ARM Based Embedded Pro-cessor Architecture and Application,” Beijing University of Aeronautics and Astronautics Press, Beijing, 2002.

[6]   J.M. Nam, S.M. Jung, D.H. Yang and M.K. Lee, “Design and Implementation of 160 × 192 Pixel Array Capaciti-veType Fingerprint Sensor,” Circuits, Systems & Signal Processing, Vol. 24, No. 4, 2005, pp. 401413.

[7]   L. Zhang, “Based on DSP and RF Card Embedded Fin-gerprint Identification System Design and Implementation of [D],” University of Electronic Science and Technology of China, Chengdu, 2009.

[8]   K. AlBegain, I. Awan and D. D. Kouvatsos, “Analysis of GSM/GPRS Cell with Multiple Data Service Classes,” Wireless Personal Communications, Vol. 25, No. 1, 2003, pp. 4157.

[9]   Y. Li, “ΜCLinux Based on ARM Embedded System Theory and Application,” Tsinghua University Press, Beijing, 2009.

[10]   J. K. Zhang and X. Q. Zhang, “Embedded Linux System Development Technology Xiangjie―Based on ARM,” Posts & Telecom Press, Beijing, 2006.

[11]   M. F. Du, “Development of Ethernet Interface for Smart Entry Controller Based on ARM & Linux Architecture,” Computer Engineering, Vol. 33, No. 16, 2007, pp. 234 236.

[12]   C. J. Zhang, “System of Defending to Rob by Tailing Behind of Double Gate by Chip Microcomputer Control,” Computer Engineering and Applications, Vol. 43, No. 5, 2007, pp. 7981.

 
 
Top